** a legal notice, here is a blessing:
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** $Id: btree.c,v 1.8 2005/08/22 18:22:12 rmsimpson Exp $
**
** This file implements a external (disk-based) database using BTrees.
** For a detailed discussion of BTrees, refer to
**
**     Donald E. Knuth, THE ART OF COMPUTER PROGRAMMING, Volume 3:
**     "Sorting And Searching", pages 473-480. Addison-Wesley
**     Publishing Company, Reading, Massachusetts.
................................................................................
*/
#ifndef SQLITE_OMIT_PAGER_PRAGMAS
int sqlite3BtreeSetSafetyLevel(Btree *pBt, int level){
  sqlite3pager_set_safety_level(pBt->pPager, level);
  return SQLITE_OK;
}
#endif










#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) || !defined(SQLITE_OMIT_VACUUM)
/*
** Change the default pages size and the number of reserved bytes per page.
**
** The page size must be a power of 2 between 512 and 65536.  If the page
** size supplied does not meet this constraint then the page size is not

** a legal notice, here is a blessing:
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** $Id: btree.c,v 1.9 2005/08/27 23:19:40 rmsimpson Exp $
**
** This file implements a external (disk-based) database using BTrees.
** For a detailed discussion of BTrees, refer to
**
**     Donald E. Knuth, THE ART OF COMPUTER PROGRAMMING, Volume 3:
**     "Sorting And Searching", pages 473-480. Addison-Wesley
**     Publishing Company, Reading, Massachusetts.
................................................................................
*/
#ifndef SQLITE_OMIT_PAGER_PRAGMAS
int sqlite3BtreeSetSafetyLevel(Btree *pBt, int level){
  sqlite3pager_set_safety_level(pBt->pPager, level);
  return SQLITE_OK;
}
#endif

/*
** Return TRUE if the given btree is set to safety level 1.  In other
** words, return TRUE if no sync() occurs on the disk files.
*/
int sqlite3BtreeSyncDisabled(Btree *pBt){
  assert( pBt && pBt->pPager );
  return sqlite3pager_nosync(pBt->pPager);
}

#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) || !defined(SQLITE_OMIT_VACUUM)
/*
** Change the default pages size and the number of reserved bytes per page.
**
** The page size must be a power of 2 between 512 and 65536.  If the page
** size supplied does not meet this constraint then the page size is not

**    May you share freely, never taking more than you give.
**
*************************************************************************
** This header file defines the interface that the sqlite B-Tree file
** subsystem.  See comments in the source code for a detailed description
** of what each interface routine does.
**
** @(#) $Id: btree.h,v 1.7 2005/08/22 18:22:12 rmsimpson Exp $
*/
#ifndef _BTREE_H_
#define _BTREE_H_

/* TODO: This definition is just included so other modules compile. It
** needs to be revisited.
*/
................................................................................
#define BTREE_NO_READLOCK   2  /* Omit readlocks on readonly files */
#define BTREE_MEMORY        4  /* In-memory DB.  No argument */

int sqlite3BtreeClose(Btree*);
int sqlite3BtreeSetBusyHandler(Btree*,BusyHandler*);
int sqlite3BtreeSetCacheSize(Btree*,int);
int sqlite3BtreeSetSafetyLevel(Btree*,int);

int sqlite3BtreeSetPageSize(Btree*,int,int);
int sqlite3BtreeGetPageSize(Btree*);
int sqlite3BtreeGetReserve(Btree*);
int sqlite3BtreeSetAutoVacuum(Btree *, int);
int sqlite3BtreeGetAutoVacuum(Btree *);
int sqlite3BtreeBeginTrans(Btree*,int);
int sqlite3BtreeCommit(Btree*);

**    May you share freely, never taking more than you give.
**
*************************************************************************
** This header file defines the interface that the sqlite B-Tree file
** subsystem.  See comments in the source code for a detailed description
** of what each interface routine does.
**
** @(#) $Id: btree.h,v 1.8 2005/08/27 23:19:40 rmsimpson Exp $
*/
#ifndef _BTREE_H_
#define _BTREE_H_

/* TODO: This definition is just included so other modules compile. It
** needs to be revisited.
*/
................................................................................
#define BTREE_NO_READLOCK   2  /* Omit readlocks on readonly files */
#define BTREE_MEMORY        4  /* In-memory DB.  No argument */

int sqlite3BtreeClose(Btree*);
int sqlite3BtreeSetBusyHandler(Btree*,BusyHandler*);
int sqlite3BtreeSetCacheSize(Btree*,int);
int sqlite3BtreeSetSafetyLevel(Btree*,int);
int sqlite3BtreeSyncDisabled(Btree*);
int sqlite3BtreeSetPageSize(Btree*,int,int);
int sqlite3BtreeGetPageSize(Btree*);
int sqlite3BtreeGetReserve(Btree*);
int sqlite3BtreeSetAutoVacuum(Btree *, int);
int sqlite3BtreeGetAutoVacuum(Btree *);
int sqlite3BtreeBeginTrans(Btree*,int);
int sqlite3BtreeCommit(Btree*);

**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** This file contains routines used for analyzing expressions and
** for generating VDBE code that evaluates expressions in SQLite.
**
<<<<<<< expr.c
** $Id: expr.c,v 1.13 2005/08/26 03:08:23 rmsimpson Exp $
=======
** $Id: expr.c,v 1.13 2005/08/26 03:08:23 rmsimpson Exp $
>>>>>>> 1.12
*/
#include "sqliteInt.h"
#include <ctype.h>

/*
** Return the 'affinity' of the expression pExpr if any.
**

**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** This file contains routines used for analyzing expressions and
** for generating VDBE code that evaluates expressions in SQLite.
**
** $Id: expr.c,v 1.14 2005/08/27 23:19:40 rmsimpson Exp $




*/
#include "sqliteInt.h"
#include <ctype.h>

/*
** Return the 'affinity' of the expression pExpr if any.
**

** This file contains the C functions that implement various SQL
** functions of SQLite.  
**
** There is only one exported symbol in this file - the function
** sqliteRegisterBuildinFunctions() found at the bottom of the file.
** All other code has file scope.
**
** $Id: func.c,v 1.7 2005/08/22 18:22:12 rmsimpson Exp $
*/
#include "sqliteInt.h"
#include <ctype.h>
#include <math.h>
#include <stdlib.h>
#include <assert.h>
#include "vdbeInt.h"
................................................................................
}   
static void countFinalize(sqlite3_context *context){
  CountCtx *p;
  p = (CountCtx *)sqlite3_aggregate_context(context, sizeof(*p));
  sqlite3_result_int(context, p ? p->n : 0);
}

/*
** This function tracks state information for the min() and max()
** aggregate functions.
*/
typedef struct MinMaxCtx MinMaxCtx;
struct MinMaxCtx {
  char *z;         /* The best so far */
  char zBuf[28];   /* Space that can be used for storage */
};

/*
** Routines to implement min() and max() aggregate functions.
*/
static void minmaxStep(sqlite3_context *context, int argc, sqlite3_value **argv){
  Mem *pArg  = (Mem *)argv[0];
  Mem *pBest;

** This file contains the C functions that implement various SQL
** functions of SQLite.  
**
** There is only one exported symbol in this file - the function
** sqliteRegisterBuildinFunctions() found at the bottom of the file.
** All other code has file scope.
**
** $Id: func.c,v 1.8 2005/08/27 23:19:40 rmsimpson Exp $
*/
#include "sqliteInt.h"
#include <ctype.h>
#include <math.h>
#include <stdlib.h>
#include <assert.h>
#include "vdbeInt.h"
................................................................................
}   
static void countFinalize(sqlite3_context *context){
  CountCtx *p;
  p = (CountCtx *)sqlite3_aggregate_context(context, sizeof(*p));
  sqlite3_result_int(context, p ? p->n : 0);
}











/*
** Routines to implement min() and max() aggregate functions.
*/
static void minmaxStep(sqlite3_context *context, int argc, sqlite3_value **argv){
  Mem *pArg  = (Mem *)argv[0];
  Mem *pBest;

** The pager is used to access a database disk file.  It implements
** atomic commit and rollback through the use of a journal file that
** is separate from the database file.  The pager also implements file
** locking to prevent two processes from writing the same database
** file simultaneously, or one process from reading the database while
** another is writing.
**
** @(#) $Id: pager.c,v 1.7 2005/08/22 18:22:12 rmsimpson Exp $
*/
#ifndef SQLITE_OMIT_DISKIO
#include "sqliteInt.h"
#include "os.h"
#include "pager.h"
#include <assert.h>
#include <string.h>
................................................................................
  rc = write32bits(&pPager->jfd, len);
  if( rc!=SQLITE_OK ) return rc;

  rc = write32bits(&pPager->jfd, cksum);
  if( rc!=SQLITE_OK ) return rc;

  rc = sqlite3OsWrite(&pPager->jfd, aJournalMagic, sizeof(aJournalMagic));
  pPager->needSync = 1;
  return rc;
}

/*
** Add or remove a page from the list of all pages that are in the
** statement journal.
**
................................................................................

/*
** Return the full pathname of the journal file.
*/
const char *sqlite3pager_journalname(Pager *pPager){
  return pPager->zJournal;
}









/*
** Set the codec for this pager
*/
void sqlite3pager_set_codec(
  Pager *pPager,
  void (*xCodec)(void*,void*,Pgno,int),

** The pager is used to access a database disk file.  It implements
** atomic commit and rollback through the use of a journal file that
** is separate from the database file.  The pager also implements file
** locking to prevent two processes from writing the same database
** file simultaneously, or one process from reading the database while
** another is writing.
**
** @(#) $Id: pager.c,v 1.8 2005/08/27 23:19:40 rmsimpson Exp $
*/
#ifndef SQLITE_OMIT_DISKIO
#include "sqliteInt.h"
#include "os.h"
#include "pager.h"
#include <assert.h>
#include <string.h>
................................................................................
  rc = write32bits(&pPager->jfd, len);
  if( rc!=SQLITE_OK ) return rc;

  rc = write32bits(&pPager->jfd, cksum);
  if( rc!=SQLITE_OK ) return rc;

  rc = sqlite3OsWrite(&pPager->jfd, aJournalMagic, sizeof(aJournalMagic));
  pPager->needSync = !pPager->noSync;
  return rc;
}

/*
** Add or remove a page from the list of all pages that are in the
** statement journal.
**
................................................................................

/*
** Return the full pathname of the journal file.
*/
const char *sqlite3pager_journalname(Pager *pPager){
  return pPager->zJournal;
}

/*
** Return true if fsync() calls are disabled for this pager.  Return FALSE
** if fsync()s are executed normally.
*/
int sqlite3pager_nosync(Pager *pPager){
  return pPager->noSync;
}

/*
** Set the codec for this pager
*/
void sqlite3pager_set_codec(
  Pager *pPager,
  void (*xCodec)(void*,void*,Pgno,int),

**    May you share freely, never taking more than you give.
**
*************************************************************************
** This header file defines the interface that the sqlite page cache
** subsystem.  The page cache subsystem reads and writes a file a page
** at a time and provides a journal for rollback.
**
** @(#) $Id: pager.h,v 1.7 2005/08/22 18:22:12 rmsimpson Exp $
*/

/*
** The default size of a database page.
*/
#ifndef SQLITE_DEFAULT_PAGE_SIZE
# define SQLITE_DEFAULT_PAGE_SIZE 1024
................................................................................
void sqlite3pager_dont_rollback(void*);
void sqlite3pager_dont_write(Pager*, Pgno);
int *sqlite3pager_stats(Pager*);
void sqlite3pager_set_safety_level(Pager*,int);
const char *sqlite3pager_filename(Pager*);
const char *sqlite3pager_dirname(Pager*);
const char *sqlite3pager_journalname(Pager*);

int sqlite3pager_rename(Pager*, const char *zNewName);
void sqlite3pager_set_codec(Pager*,void(*)(void*,void*,Pgno,int),void*);
int sqlite3pager_movepage(Pager*,void*,Pgno);
int sqlite3pager_reset(Pager*);

#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
int sqlite3pager_lockstate(Pager*);
#endif

#ifdef SQLITE_TEST
void sqlite3pager_refdump(Pager*);
int pager3_refinfo_enable;
#endif

**    May you share freely, never taking more than you give.
**
*************************************************************************
** This header file defines the interface that the sqlite page cache
** subsystem.  The page cache subsystem reads and writes a file a page
** at a time and provides a journal for rollback.
**
** @(#) $Id: pager.h,v 1.8 2005/08/27 23:19:40 rmsimpson Exp $
*/

/*
** The default size of a database page.
*/
#ifndef SQLITE_DEFAULT_PAGE_SIZE
# define SQLITE_DEFAULT_PAGE_SIZE 1024
................................................................................
void sqlite3pager_dont_rollback(void*);
void sqlite3pager_dont_write(Pager*, Pgno);
int *sqlite3pager_stats(Pager*);
void sqlite3pager_set_safety_level(Pager*,int);
const char *sqlite3pager_filename(Pager*);
const char *sqlite3pager_dirname(Pager*);
const char *sqlite3pager_journalname(Pager*);
int sqlite3pager_nosync(Pager*);
int sqlite3pager_rename(Pager*, const char *zNewName);
void sqlite3pager_set_codec(Pager*,void(*)(void*,void*,Pgno,int),void*);
int sqlite3pager_movepage(Pager*,void*,Pgno);
int sqlite3pager_reset(Pager*);

#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
int sqlite3pager_lockstate(Pager*);
#endif

#ifdef SQLITE_TEST
void sqlite3pager_refdump(Pager*);
int pager3_refinfo_enable;
#endif

*************************************************************************
** An tokenizer for SQL
**
** This file contains C code that splits an SQL input string up into
** individual tokens and sends those tokens one-by-one over to the
** parser for analysis.
**
** $Id: tokenize.c,v 1.8 2005/08/24 15:05:38 rmsimpson Exp $
*/
#include "sqliteInt.h"
#include "os.h"
#include <ctype.h>
#include <stdlib.h>

/*

*************************************************************************
** An tokenizer for SQL
**
** This file contains C code that splits an SQL input string up into
** individual tokens and sends those tokens one-by-one over to the
** parser for analysis.
**
** $Id: tokenize.c,v 1.9 2005/08/27 23:19:40 rmsimpson Exp $
*/
#include "sqliteInt.h"
#include "os.h"
#include <ctype.h>
#include <stdlib.h>

/*

**
*************************************************************************
** Utility functions used throughout sqlite.
**
** This file contains functions for allocating memory, comparing
** strings, and stuff like that.
**
** $Id: util.c,v 1.7 2005/08/22 18:22:12 rmsimpson Exp $
*/
#include "sqliteInt.h"
#include <stdarg.h>
#include <ctype.h>

#if SQLITE_MEMDEBUG>2 && defined(__GLIBC__)
#include <execinfo.h>
................................................................................
** call to sqlite3_close(db) and db has been deallocated.  And we do
** not want to write into deallocated memory.
*/
int sqlite3SafetyOn(sqlite3 *db){
  if( db->magic==SQLITE_MAGIC_OPEN ){
    db->magic = SQLITE_MAGIC_BUSY;
    return 0;
  }else if( db->magic==SQLITE_MAGIC_BUSY || db->magic==SQLITE_MAGIC_ERROR ){
    db->magic = SQLITE_MAGIC_ERROR;
    db->flags |= SQLITE_Interrupt;
  }
  return 1;
}

/*
................................................................................
** Return an error (non-zero) if the magic was not SQLITE_MAGIC_BUSY
** when this routine is called.
*/
int sqlite3SafetyOff(sqlite3 *db){
  if( db->magic==SQLITE_MAGIC_BUSY ){
    db->magic = SQLITE_MAGIC_OPEN;
    return 0;
  }else if( db->magic==SQLITE_MAGIC_OPEN || db->magic==SQLITE_MAGIC_ERROR ){
    db->magic = SQLITE_MAGIC_ERROR;
    db->flags |= SQLITE_Interrupt;
  }
  return 1;
}

/*

**
*************************************************************************
** Utility functions used throughout sqlite.
**
** This file contains functions for allocating memory, comparing
** strings, and stuff like that.
**
** $Id: util.c,v 1.8 2005/08/27 23:19:40 rmsimpson Exp $
*/
#include "sqliteInt.h"
#include <stdarg.h>
#include <ctype.h>

#if SQLITE_MEMDEBUG>2 && defined(__GLIBC__)
#include <execinfo.h>
................................................................................
** call to sqlite3_close(db) and db has been deallocated.  And we do
** not want to write into deallocated memory.
*/
int sqlite3SafetyOn(sqlite3 *db){
  if( db->magic==SQLITE_MAGIC_OPEN ){
    db->magic = SQLITE_MAGIC_BUSY;
    return 0;
  }else if( db->magic==SQLITE_MAGIC_BUSY ){
    db->magic = SQLITE_MAGIC_ERROR;
    db->flags |= SQLITE_Interrupt;
  }
  return 1;
}

/*
................................................................................
** Return an error (non-zero) if the magic was not SQLITE_MAGIC_BUSY
** when this routine is called.
*/
int sqlite3SafetyOff(sqlite3 *db){
  if( db->magic==SQLITE_MAGIC_BUSY ){
    db->magic = SQLITE_MAGIC_OPEN;
    return 0;
  }else if( db->magic==SQLITE_MAGIC_OPEN ){
    db->magic = SQLITE_MAGIC_ERROR;
    db->flags |= SQLITE_Interrupt;
  }
  return 1;
}

/*

  return p->pFunc->pUserData;
}

/*
** Allocate or return the aggregate context for a user function.  A new
** context is allocated on the first call.  Subsequent calls return the
** same context that was returned on prior calls.
**
** This routine is defined here in vdbe.c because it depends on knowing
** the internals of the sqlite3_context structure which is only defined in
** this source file.
*/
void *sqlite3_aggregate_context(sqlite3_context *p, int nByte){
  assert( p && p->pFunc && p->pFunc->xStep );
  if( p->pAgg==0 ){
    if( nByte<=NBFS ){
      p->pAgg = (void*)p->s.z;
      memset(p->pAgg, 0, nByte);

  return p->pFunc->pUserData;
}

/*
** Allocate or return the aggregate context for a user function.  A new
** context is allocated on the first call.  Subsequent calls return the
** same context that was returned on prior calls.




*/
void *sqlite3_aggregate_context(sqlite3_context *p, int nByte){
  assert( p && p->pFunc && p->pFunc->xStep );
  if( p->pAgg==0 ){
    if( nByte<=NBFS ){
      p->pAgg = (void*)p->s.z;
      memset(p->pAgg, 0, nByte);

  /* The complex case - There is a multi-file write-transaction active.
  ** This requires a master journal file to ensure the transaction is
  ** committed atomicly.
  */
#ifndef SQLITE_OMIT_DISKIO
  else{

    char *zMaster = 0;   /* File-name for the master journal */
    char const *zMainFile = sqlite3BtreeGetFilename(db->aDb[0].pBt);
    OsFile master;

    /* Select a master journal file name */
    do {
      u32 random;
................................................................................
    */
    for(i=0; i<db->nDb; i++){ 
      Btree *pBt = db->aDb[i].pBt;
      if( i==1 ) continue;   /* Ignore the TEMP database */
      if( pBt && sqlite3BtreeIsInTrans(pBt) ){
        char const *zFile = sqlite3BtreeGetJournalname(pBt);
        if( zFile[0]==0 ) continue;  /* Ignore :memory: databases */



        rc = sqlite3OsWrite(&master, zFile, strlen(zFile)+1);
        if( rc!=SQLITE_OK ){
          sqlite3OsClose(&master);
          sqlite3OsDelete(zMaster);
          sqliteFree(zMaster);
          return rc;
        }
................................................................................


    /* Sync the master journal file. Before doing this, open the directory
    ** the master journal file is store in so that it gets synced too.
    */
    zMainFile = sqlite3BtreeGetDirname(db->aDb[0].pBt);
    rc = sqlite3OsOpenDirectory(zMainFile, &master);
    if( rc!=SQLITE_OK || (rc = sqlite3OsSync(&master))!=SQLITE_OK ){
      sqlite3OsClose(&master);
      sqlite3OsDelete(zMaster);
      sqliteFree(zMaster);
      return rc;
    }

    /* Sync all the db files involved in the transaction. The same call

  /* The complex case - There is a multi-file write-transaction active.
  ** This requires a master journal file to ensure the transaction is
  ** committed atomicly.
  */
#ifndef SQLITE_OMIT_DISKIO
  else{
    int needSync = 0;
    char *zMaster = 0;   /* File-name for the master journal */
    char const *zMainFile = sqlite3BtreeGetFilename(db->aDb[0].pBt);
    OsFile master;

    /* Select a master journal file name */
    do {
      u32 random;
................................................................................
    */
    for(i=0; i<db->nDb; i++){ 
      Btree *pBt = db->aDb[i].pBt;
      if( i==1 ) continue;   /* Ignore the TEMP database */
      if( pBt && sqlite3BtreeIsInTrans(pBt) ){
        char const *zFile = sqlite3BtreeGetJournalname(pBt);
        if( zFile[0]==0 ) continue;  /* Ignore :memory: databases */
        if( !needSync && !sqlite3BtreeSyncDisabled(pBt) ){
          needSync = 1;
        }
        rc = sqlite3OsWrite(&master, zFile, strlen(zFile)+1);
        if( rc!=SQLITE_OK ){
          sqlite3OsClose(&master);
          sqlite3OsDelete(zMaster);
          sqliteFree(zMaster);
          return rc;
        }
................................................................................


    /* Sync the master journal file. Before doing this, open the directory
    ** the master journal file is store in so that it gets synced too.
    */
    zMainFile = sqlite3BtreeGetDirname(db->aDb[0].pBt);
    rc = sqlite3OsOpenDirectory(zMainFile, &master);
    if( rc!=SQLITE_OK || (needSync && (rc=sqlite3OsSync(&master))!=SQLITE_OK) ){
      sqlite3OsClose(&master);
      sqlite3OsDelete(zMaster);
      sqliteFree(zMaster);
      return rc;
    }

    /* Sync all the db files involved in the transaction. The same call

** This module contains C code that generates VDBE code used to process
** the WHERE clause of SQL statements.  This module is reponsible for
** generating the code that loops through a table looking for applicable
** rows.  Indices are selected and used to speed the search when doing
** so is applicable.  Because this module is responsible for selecting
** indices, you might also think of this module as the "query optimizer".
**
** $Id: where.c,v 1.8 2005/08/24 15:05:38 rmsimpson Exp $
*/
#include "sqliteInt.h"

/*
** The number of bits in a Bitmask.  "BMS" means "BitMask Size".
*/
#define BMS  (sizeof(Bitmask)*8)

** This module contains C code that generates VDBE code used to process
** the WHERE clause of SQL statements.  This module is reponsible for
** generating the code that loops through a table looking for applicable
** rows.  Indices are selected and used to speed the search when doing
** so is applicable.  Because this module is responsible for selecting
** indices, you might also think of this module as the "query optimizer".
**
** $Id: where.c,v 1.9 2005/08/27 23:19:40 rmsimpson Exp $
*/
#include "sqliteInt.h"

/*
** The number of bits in a Bitmask.  "BMS" means "BitMask Size".
*/
#define BMS  (sizeof(Bitmask)*8)