**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.7.15"
#define SQLITE_VERSION_NUMBER 3007015
#define SQLITE_SOURCE_ID      "2012-10-12 18:06:07 de784399ed1f0e27fc875e32719643d19819c8fb"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version, sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
................................................................................

SQLITE_PRIVATE int sqlite3BtreeDropTable(Btree*, int, int*);
SQLITE_PRIVATE int sqlite3BtreeClearTable(Btree*, int, int*);
SQLITE_PRIVATE void sqlite3BtreeTripAllCursors(Btree*, int);

SQLITE_PRIVATE void sqlite3BtreeGetMeta(Btree *pBtree, int idx, u32 *pValue);
SQLITE_PRIVATE int sqlite3BtreeUpdateMeta(Btree*, int idx, u32 value);



/*
** The second parameter to sqlite3BtreeGetMeta or sqlite3BtreeUpdateMeta
** should be one of the following values. The integer values are assigned 
** to constants so that the offset of the corresponding field in an
** SQLite database header may be found using the following formula:
**
................................................................................
# define DIRECT_MODE 0
  assert( isDirectMode==0 );
  UNUSED_PARAMETER(isDirectMode);
#else
# define DIRECT_MODE isDirectMode
#endif

  if( !pPager->changeCountDone && pPager->dbSize>0 ){
    PgHdr *pPgHdr;                /* Reference to page 1 */

    assert( !pPager->tempFile && isOpen(pPager->fd) );

    /* Open page 1 of the file for writing. */
    rc = sqlite3PagerGet(pPager, 1, &pPgHdr);
    assert( pPgHdr==0 || rc==SQLITE_OK );
................................................................................
      ** are no outstanding references to any page other than page 1. And
      ** page 1 is never written to the log until the transaction is
      ** committed. As a result, the call to xUndo may not fail.
      */
      assert( walFramePgno(pWal, iFrame)!=1 );
      rc = xUndo(pUndoCtx, walFramePgno(pWal, iFrame));
    }
    walCleanupHash(pWal);
  }
  assert( rc==SQLITE_OK );
  return rc;
}

/* 
** Argument aWalData must point to an array of WAL_SAVEPOINT_NDATA u32 
................................................................................
  put4byte(&data[36 + 4*4], pBt->autoVacuum);
  put4byte(&data[36 + 7*4], pBt->incrVacuum);
#endif
  pBt->nPage = 1;
  data[31] = 1;
  return SQLITE_OK;
}















/*
** Attempt to start a new transaction. A write-transaction
** is started if the second argument is nonzero, otherwise a read-
** transaction.  If the second argument is 2 or more and exclusive
** transaction is started, meaning that no other process is allowed
** to access the database.  A preexisting transaction may not be
................................................................................
  
    /* Update the schema version field in the destination database. This
    ** is to make sure that the schema-version really does change in
    ** the case where the source and destination databases have the
    ** same schema version.
    */
    if( rc==SQLITE_DONE ){





      rc = sqlite3BtreeUpdateMeta(p->pDest,1,p->iDestSchema+1);

      if( rc==SQLITE_OK ){
        if( p->pDestDb ){
          sqlite3ResetAllSchemasOfConnection(p->pDestDb);
        }
        if( destMode==PAGER_JOURNALMODE_WAL ){
          rc = sqlite3BtreeSetVersion(p->pDest, 2);
        }
................................................................................
          nDestTruncate = (nSrcPage+ratio-1)/ratio;
          if( nDestTruncate==(int)PENDING_BYTE_PAGE(p->pDest->pBt) ){
            nDestTruncate--;
          }
        }else{
          nDestTruncate = nSrcPage * (pgszSrc/pgszDest);
        }

        sqlite3PagerTruncateImage(pDestPager, nDestTruncate);

        if( pgszSrc<pgszDest ){
          /* If the source page-size is smaller than the destination page-size,
          ** two extra things may need to happen:
          **
          **   * The destination may need to be truncated, and
................................................................................
          */
          const i64 iSize = (i64)pgszSrc * (i64)nSrcPage;
          sqlite3_file * const pFile = sqlite3PagerFile(pDestPager);
          i64 iOff;
          i64 iEnd;

          assert( pFile );

          assert( (i64)nDestTruncate*(i64)pgszDest >= iSize || (
                nDestTruncate==(int)(PENDING_BYTE_PAGE(p->pDest->pBt)-1)
             && iSize>=PENDING_BYTE && iSize<=PENDING_BYTE+pgszDest
          ));

          /* This call ensures that all data required to recreate the original
          ** database has been stored in the journal for pDestPager and the
          ** journal synced to disk. So at this point we may safely modify
................................................................................
    **
    ** We look at every expression in the outer query and every place we see
    ** "a" we substitute "x*3" and every place we see "b" we substitute "y+10".
    */
    pList = pParent->pEList;
    for(i=0; i<pList->nExpr; i++){
      if( pList->a[i].zName==0 ){
        const char *zSpan = pList->a[i].zSpan;
        if( ALWAYS(zSpan) ){
          pList->a[i].zName = sqlite3DbStrDup(db, zSpan);
        }
      }
    }
    substExprList(db, pParent->pEList, iParent, pSub->pEList);
    if( isAgg ){
      substExprList(db, pParent->pGroupBy, iParent, pSub->pEList);
      pParent->pHaving = substExpr(db, pParent->pHaving, iParent, pSub->pEList);
    }
................................................................................
** with 2.0.0, SQLite no longer uses GDBM so this command has
** become a no-op.
*/
SQLITE_PRIVATE void sqlite3Vacuum(Parse *pParse){
  Vdbe *v = sqlite3GetVdbe(pParse);
  if( v ){
    sqlite3VdbeAddOp2(v, OP_Vacuum, 0, 0);

  }
  return;
}

/*
** This routine implements the OP_Vacuum opcode of the VDBE.
*/

**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.7.15"
#define SQLITE_VERSION_NUMBER 3007015
#define SQLITE_SOURCE_ID      "2012-10-15 20:28:22 2c3af657fee6153842d660a6ce29aa7d791ebd38"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version, sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
................................................................................

SQLITE_PRIVATE int sqlite3BtreeDropTable(Btree*, int, int*);
SQLITE_PRIVATE int sqlite3BtreeClearTable(Btree*, int, int*);
SQLITE_PRIVATE void sqlite3BtreeTripAllCursors(Btree*, int);

SQLITE_PRIVATE void sqlite3BtreeGetMeta(Btree *pBtree, int idx, u32 *pValue);
SQLITE_PRIVATE int sqlite3BtreeUpdateMeta(Btree*, int idx, u32 value);

SQLITE_PRIVATE int sqlite3BtreeNewDb(Btree *p);

/*
** The second parameter to sqlite3BtreeGetMeta or sqlite3BtreeUpdateMeta
** should be one of the following values. The integer values are assigned 
** to constants so that the offset of the corresponding field in an
** SQLite database header may be found using the following formula:
**
................................................................................
# define DIRECT_MODE 0
  assert( isDirectMode==0 );
  UNUSED_PARAMETER(isDirectMode);
#else
# define DIRECT_MODE isDirectMode
#endif

  if( !pPager->changeCountDone && ALWAYS(pPager->dbSize>0) ){
    PgHdr *pPgHdr;                /* Reference to page 1 */

    assert( !pPager->tempFile && isOpen(pPager->fd) );

    /* Open page 1 of the file for writing. */
    rc = sqlite3PagerGet(pPager, 1, &pPgHdr);
    assert( pPgHdr==0 || rc==SQLITE_OK );
................................................................................
      ** are no outstanding references to any page other than page 1. And
      ** page 1 is never written to the log until the transaction is
      ** committed. As a result, the call to xUndo may not fail.
      */
      assert( walFramePgno(pWal, iFrame)!=1 );
      rc = xUndo(pUndoCtx, walFramePgno(pWal, iFrame));
    }
    if( iMax!=pWal->hdr.mxFrame ) walCleanupHash(pWal);
  }
  assert( rc==SQLITE_OK );
  return rc;
}

/* 
** Argument aWalData must point to an array of WAL_SAVEPOINT_NDATA u32 
................................................................................
  put4byte(&data[36 + 4*4], pBt->autoVacuum);
  put4byte(&data[36 + 7*4], pBt->incrVacuum);
#endif
  pBt->nPage = 1;
  data[31] = 1;
  return SQLITE_OK;
}

/*
** Initialize the first page of the database file (creating a database
** consisting of a single page and no schema objects). Return SQLITE_OK
** if successful, or an SQLite error code otherwise.
*/
SQLITE_PRIVATE int sqlite3BtreeNewDb(Btree *p){
  int rc;
  sqlite3BtreeEnter(p);
  p->pBt->nPage = 0;
  rc = newDatabase(p->pBt);
  sqlite3BtreeLeave(p);
  return rc;
}

/*
** Attempt to start a new transaction. A write-transaction
** is started if the second argument is nonzero, otherwise a read-
** transaction.  If the second argument is 2 or more and exclusive
** transaction is started, meaning that no other process is allowed
** to access the database.  A preexisting transaction may not be
................................................................................
  
    /* Update the schema version field in the destination database. This
    ** is to make sure that the schema-version really does change in
    ** the case where the source and destination databases have the
    ** same schema version.
    */
    if( rc==SQLITE_DONE ){
      if( nSrcPage==0 ){
        rc = sqlite3BtreeNewDb(p->pDest);
        nSrcPage = 1;
      }
      if( rc==SQLITE_OK || rc==SQLITE_DONE ){
        rc = sqlite3BtreeUpdateMeta(p->pDest,1,p->iDestSchema+1);
      }
      if( rc==SQLITE_OK ){
        if( p->pDestDb ){
          sqlite3ResetAllSchemasOfConnection(p->pDestDb);
        }
        if( destMode==PAGER_JOURNALMODE_WAL ){
          rc = sqlite3BtreeSetVersion(p->pDest, 2);
        }
................................................................................
          nDestTruncate = (nSrcPage+ratio-1)/ratio;
          if( nDestTruncate==(int)PENDING_BYTE_PAGE(p->pDest->pBt) ){
            nDestTruncate--;
          }
        }else{
          nDestTruncate = nSrcPage * (pgszSrc/pgszDest);
        }
        assert( nDestTruncate>0 );
        sqlite3PagerTruncateImage(pDestPager, nDestTruncate);

        if( pgszSrc<pgszDest ){
          /* If the source page-size is smaller than the destination page-size,
          ** two extra things may need to happen:
          **
          **   * The destination may need to be truncated, and
................................................................................
          */
          const i64 iSize = (i64)pgszSrc * (i64)nSrcPage;
          sqlite3_file * const pFile = sqlite3PagerFile(pDestPager);
          i64 iOff;
          i64 iEnd;

          assert( pFile );
          assert( nDestTruncate==0 
              || (i64)nDestTruncate*(i64)pgszDest >= iSize || (
                nDestTruncate==(int)(PENDING_BYTE_PAGE(p->pDest->pBt)-1)
             && iSize>=PENDING_BYTE && iSize<=PENDING_BYTE+pgszDest
          ));

          /* This call ensures that all data required to recreate the original
          ** database has been stored in the journal for pDestPager and the
          ** journal synced to disk. So at this point we may safely modify
................................................................................
    **
    ** We look at every expression in the outer query and every place we see
    ** "a" we substitute "x*3" and every place we see "b" we substitute "y+10".
    */
    pList = pParent->pEList;
    for(i=0; i<pList->nExpr; i++){
      if( pList->a[i].zName==0 ){
        char *zName = sqlite3DbStrDup(db, pList->a[i].zSpan);
        sqlite3Dequote(zName);
        pList->a[i].zName = zName;

      }
    }
    substExprList(db, pParent->pEList, iParent, pSub->pEList);
    if( isAgg ){
      substExprList(db, pParent->pGroupBy, iParent, pSub->pEList);
      pParent->pHaving = substExpr(db, pParent->pHaving, iParent, pSub->pEList);
    }
................................................................................
** with 2.0.0, SQLite no longer uses GDBM so this command has
** become a no-op.
*/
SQLITE_PRIVATE void sqlite3Vacuum(Parse *pParse){
  Vdbe *v = sqlite3GetVdbe(pParse);
  if( v ){
    sqlite3VdbeAddOp2(v, OP_Vacuum, 0, 0);
    sqlite3VdbeUsesBtree(v, 0);
  }
  return;
}

/*
** This routine implements the OP_Vacuum opcode of the VDBE.
*/

**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.7.15"
#define SQLITE_VERSION_NUMBER 3007015
#define SQLITE_SOURCE_ID      "2012-10-12 18:06:07 de784399ed1f0e27fc875e32719643d19819c8fb"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version, sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros

**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.7.15"
#define SQLITE_VERSION_NUMBER 3007015
#define SQLITE_SOURCE_ID      "2012-10-15 20:28:22 2c3af657fee6153842d660a6ce29aa7d791ebd38"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version, sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros