**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.7.15"
#define SQLITE_VERSION_NUMBER 3007015
#define SQLITE_SOURCE_ID      "2012-10-26 00:55:07 6d42d806adb833572a324d4141ab3b2c315617b2"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version, sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
................................................................................
#define SQLITE_IOERR_CLOSE             (SQLITE_IOERR | (16<<8))
#define SQLITE_IOERR_DIR_CLOSE         (SQLITE_IOERR | (17<<8))
#define SQLITE_IOERR_SHMOPEN           (SQLITE_IOERR | (18<<8))
#define SQLITE_IOERR_SHMSIZE           (SQLITE_IOERR | (19<<8))
#define SQLITE_IOERR_SHMLOCK           (SQLITE_IOERR | (20<<8))
#define SQLITE_IOERR_SHMMAP            (SQLITE_IOERR | (21<<8))
#define SQLITE_IOERR_SEEK              (SQLITE_IOERR | (22<<8))

#define SQLITE_LOCKED_SHAREDCACHE      (SQLITE_LOCKED |  (1<<8))
#define SQLITE_BUSY_RECOVERY           (SQLITE_BUSY   |  (1<<8))
#define SQLITE_CANTOPEN_NOTEMPDIR      (SQLITE_CANTOPEN | (1<<8))
#define SQLITE_CANTOPEN_ISDIR          (SQLITE_CANTOPEN | (2<<8))
#define SQLITE_CANTOPEN_FULLPATH       (SQLITE_CANTOPEN | (3<<8))
#define SQLITE_CORRUPT_VTAB            (SQLITE_CORRUPT | (1<<8))
#define SQLITE_READONLY_RECOVERY       (SQLITE_READONLY | (1<<8))
................................................................................
** without change even with newer versions of SQLite.
**
** [[SQLITE_CONFIG_PCACHE]] [[SQLITE_CONFIG_GETPCACHE]]
** <dt>SQLITE_CONFIG_PCACHE and SQLITE_CONFIG_GETPCACHE
** <dd> These options are obsolete and should not be used by new code.
** They are retained for backwards compatibility but are now no-ops.
** </dl>
















*/
#define SQLITE_CONFIG_SINGLETHREAD  1  /* nil */
#define SQLITE_CONFIG_MULTITHREAD   2  /* nil */
#define SQLITE_CONFIG_SERIALIZED    3  /* nil */
#define SQLITE_CONFIG_MALLOC        4  /* sqlite3_mem_methods* */
#define SQLITE_CONFIG_GETMALLOC     5  /* sqlite3_mem_methods* */
#define SQLITE_CONFIG_SCRATCH       6  /* void*, int sz, int N */
................................................................................
#define SQLITE_CONFIG_PCACHE       14  /* no-op */
#define SQLITE_CONFIG_GETPCACHE    15  /* no-op */
#define SQLITE_CONFIG_LOG          16  /* xFunc, void* */
#define SQLITE_CONFIG_URI          17  /* int */
#define SQLITE_CONFIG_PCACHE2      18  /* sqlite3_pcache_methods2* */
#define SQLITE_CONFIG_GETPCACHE2   19  /* sqlite3_pcache_methods2* */
#define SQLITE_CONFIG_COVERING_INDEX_SCAN 20  /* int */


/*
** CAPI3REF: Database Connection Configuration Options
**
** These constants are the available integer configuration options that
** can be passed as the second argument to the [sqlite3_db_config()] interface.
**
................................................................................
  Db *aDb;                      /* All backends */
  int nDb;                      /* Number of backends currently in use */
  int flags;                    /* Miscellaneous flags. See below */
  i64 lastRowid;                /* ROWID of most recent insert (see above) */
  unsigned int openFlags;       /* Flags passed to sqlite3_vfs.xOpen() */
  int errCode;                  /* Most recent error code (SQLITE_*) */
  int errMask;                  /* & result codes with this before returning */
  u8 dbOptFlags;                /* Flags to enable/disable optimizations */
  u8 autoCommit;                /* The auto-commit flag. */
  u8 temp_store;                /* 1: file 2: memory 0: default */
  u8 mallocFailed;              /* True if we have seen a malloc failure */
  u8 dfltLockMode;              /* Default locking-mode for attached dbs */
  signed char nextAutovac;      /* Autovac setting after VACUUM if >=0 */
  u8 suppressErr;               /* Do not issue error messages if true */
  u8 vtabOnConflict;            /* Value to return for s3_vtab_on_conflict() */
................................................................................
#define SQLITE_ColumnCache    0x0002   /* Column cache */
#define SQLITE_GroupByOrder   0x0004   /* GROUPBY cover of ORDERBY */
#define SQLITE_FactorOutConst 0x0008   /* Constant factoring */
#define SQLITE_IdxRealAsInt   0x0010   /* Store REAL as INT in indices */
#define SQLITE_DistinctOpt    0x0020   /* DISTINCT using indexes */
#define SQLITE_CoverIdxScan   0x0040   /* Covering index scans */
#define SQLITE_OrderByIdxJoin 0x0080   /* ORDER BY of joins via index */

#define SQLITE_AllOpts        0x00ff   /* All optimizations */

/*
** Macros for testing whether or not optimizations are enabled or disabled.
*/
#ifndef SQLITE_OMIT_BUILTIN_TEST
#define OptimizationDisabled(db, mask)  (((db)->dbOptFlags&(mask))!=0)
#define OptimizationEnabled(db, mask)   (((db)->dbOptFlags&(mask))==0)
................................................................................
#define COLFLAG_HIDDEN   0x0002    /* A hidden column in a virtual table */

/*
** A "Collating Sequence" is defined by an instance of the following
** structure. Conceptually, a collating sequence consists of a name and
** a comparison routine that defines the order of that sequence.
**
** There may two separate implementations of the collation function, one
** that processes text in UTF-8 encoding (CollSeq.xCmp) and another that
** processes text encoded in UTF-16 (CollSeq.xCmp16), using the machine
** native byte order. When a collation sequence is invoked, SQLite selects
** the version that will require the least expensive encoding
** translations, if any.
**
** The CollSeq.pUser member variable is an extra parameter that passed in
** as the first argument to the UTF-8 comparison function, xCmp.
** CollSeq.pUser16 is the equivalent for the UTF-16 comparison function,
** xCmp16.
**
** If both CollSeq.xCmp and CollSeq.xCmp16 are NULL, it means that the
** collating sequence is undefined.  Indices built on an undefined
** collating sequence may not be read or written.
*/
struct CollSeq {
  char *zName;          /* Name of the collating sequence, UTF-8 encoded */
  u8 enc;               /* Text encoding handled by xCmp() */
  void *pUser;          /* First argument to xCmp() */
................................................................................
    char *zName;      /* Name of the table */
    char *zAlias;     /* The "B" part of a "A AS B" phrase.  zName is the "A" */
    Table *pTab;      /* An SQL table corresponding to zName */
    Select *pSelect;  /* A SELECT statement used in place of a table name */
    int addrFillSub;  /* Address of subroutine to manifest a subquery */
    int regReturn;    /* Register holding return address of addrFillSub */
    u8 jointype;      /* Type of join between this able and the previous */
    u8 notIndexed;    /* True if there is a NOT INDEXED clause */
    u8 isCorrelated;  /* True if sub-query is correlated */

#ifndef SQLITE_OMIT_EXPLAIN
    u8 iSelectId;     /* If pSelect!=0, the id of the sub-select in EQP */
#endif
    int iCursor;      /* The VDBE cursor number used to access this table */
    Expr *pOn;        /* The ON clause of a join */
    IdList *pUsing;   /* The USING clause of a join */
    Bitmask colUsed;  /* Bit N (1<<N) set if column N of pTab is used */
................................................................................
      struct InLoop {
        int iCur;              /* The VDBE cursor used by this IN operator */
        int addrInTop;         /* Top of the IN loop */
      } *aInLoop;           /* Information about each nested IN operator */
    } in;                 /* Used when plan.wsFlags&WHERE_IN_ABLE */
    Index *pCovidx;       /* Possible covering index for WHERE_MULTI_OR */
  } u;


  /* The following field is really not part of the current level.  But
  ** we need a place to cache virtual table index information for each
  ** virtual table in the FROM clause and the WhereLevel structure is
  ** a convenient place since there is one WhereLevel for each FROM clause
  ** element.
  */
................................................................................
  Expr *pOffset;         /* OFFSET expression. NULL means not used. */
};

/*
** Allowed values for Select.selFlags.  The "SF" prefix stands for
** "Select Flag".
*/
#define SF_Distinct        0x01  /* Output should be DISTINCT */
#define SF_Resolved        0x02  /* Identifiers have been resolved */
#define SF_Aggregate       0x04  /* Contains aggregate functions */
#define SF_UsesEphemeral   0x08  /* Uses the OpenEphemeral opcode */
#define SF_Expanded        0x10  /* sqlite3SelectExpand() called on this */
#define SF_HasTypeInfo     0x20  /* FROM subqueries have Table metadata */
#define SF_UseSorter       0x40  /* Sort using a sorter */
#define SF_Values          0x80  /* Synthesized from VALUES clause */



/*
** The results of a select can be distributed in several ways.  The
** "SRT" prefix means "SELECT Result Type".
*/
#define SRT_Union        1  /* Store result as keys in an index */
................................................................................
  int isMallocInit;                 /* True after malloc is initialized */
  int isPCacheInit;                 /* True after malloc is initialized */
  sqlite3_mutex *pInitMutex;        /* Mutex used by sqlite3_initialize() */
  int nRefInitMutex;                /* Number of users of pInitMutex */
  void (*xLog)(void*,int,const char*); /* Function for logging */
  void *pLogArg;                       /* First argument to xLog() */
  int bLocaltimeFault;              /* True to fail localtime() calls */




};

/*
** Context pointer passed down through the tree-walk.
*/
struct Walker {
  int (*xExprCallback)(Walker*, Expr*);     /* Callback for expressions */
................................................................................
#define IN_INDEX_INDEX           3
SQLITE_PRIVATE int sqlite3FindInIndex(Parse *, Expr *, int*);

#ifdef SQLITE_ENABLE_ATOMIC_WRITE
SQLITE_PRIVATE   int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int);
SQLITE_PRIVATE   int sqlite3JournalSize(sqlite3_vfs *);
SQLITE_PRIVATE   int sqlite3JournalCreate(sqlite3_file *);

#else
  #define sqlite3JournalSize(pVfs) ((pVfs)->szOsFile)

#endif

SQLITE_PRIVATE void sqlite3MemJournalOpen(sqlite3_file *);
SQLITE_PRIVATE int sqlite3MemJournalSize(void);
SQLITE_PRIVATE int sqlite3IsMemJournal(sqlite3_file *);

#if SQLITE_MAX_EXPR_DEPTH>0
................................................................................
   0,                         /* isMallocInit */
   0,                         /* isPCacheInit */
   0,                         /* pInitMutex */
   0,                         /* nRefInitMutex */
   0,                         /* xLog */
   0,                         /* pLogArg */
   0,                         /* bLocaltimeFault */




};


/*
** Hash table for global functions - functions common to all
** database connections.  After initialization, this table is
** read-only.
................................................................................
  Bool useRandomRowid;  /* Generate new record numbers semi-randomly */
  Bool nullRow;         /* True if pointing to a row with no data */
  Bool deferredMoveto;  /* A call to sqlite3BtreeMoveto() is needed */
  Bool isTable;         /* True if a table requiring integer keys */
  Bool isIndex;         /* True if an index containing keys only - no data */
  Bool isOrdered;       /* True if the underlying table is BTREE_UNORDERED */
  Bool isSorter;        /* True if a new-style sorter */

  sqlite3_vtab_cursor *pVtabCursor;  /* The cursor for a virtual table */
  const sqlite3_module *pModule;     /* Module for cursor pVtabCursor */
  i64 seqCount;         /* Sequence counter */
  i64 movetoTarget;     /* Argument to the deferred sqlite3BtreeMoveto() */
  i64 lastRowid;        /* Last rowid from a Next or NextIdx operation */
  VdbeSorter *pSorter;  /* Sorter object for OP_SorterOpen cursors */

................................................................................
    case SQLITE_DBSTATUS_STMT_USED: {
      struct Vdbe *pVdbe;         /* Used to iterate through VMs */
      int nByte = 0;              /* Used to accumulate return value */

      db->pnBytesFreed = &nByte;
      for(pVdbe=db->pVdbe; pVdbe; pVdbe=pVdbe->pNext){
        sqlite3VdbeClearObject(db, pVdbe);

      }
      db->pnBytesFreed = 0;

      *pHighwater = 0;
      *pCurrent = nByte;

      break;
................................................................................
**   *  sqlite3_vfs method implementations.
**   *  Locking primitives for the proxy uber-locking-method. (MacOSX only)
**   *  Definitions of sqlite3_vfs objects for all locking methods
**      plus implementations of sqlite3_os_init() and sqlite3_os_end().
*/
#if SQLITE_OS_UNIX              /* This file is used on unix only */








/*
** There are various methods for file locking used for concurrency
** control:
**
**   1. POSIX locking (the default),
**   2. No locking,
**   3. Dot-file locking,
................................................................................
  unsigned short int ctrlFlags;       /* Behavioral bits.  UNIXFILE_* flags */
  int lastErrno;                      /* The unix errno from last I/O error */
  void *lockingContext;               /* Locking style specific state */
  UnixUnusedFd *pUnused;              /* Pre-allocated UnixUnusedFd */
  const char *zPath;                  /* Name of the file */
  unixShm *pShm;                      /* Shared memory segment information */
  int szChunk;                        /* Configured by FCNTL_CHUNK_SIZE */




#if SQLITE_ENABLE_LOCKING_STYLE
  int openFlags;                      /* The flags specified at open() */
#endif
#if SQLITE_ENABLE_LOCKING_STYLE || defined(__APPLE__)
  unsigned fsFlags;                   /* cached details from statfs() */
#endif
#if OS_VXWORKS
................................................................................
** larger for some devices.
**
** SQLite code assumes this function cannot fail. It also assumes that
** if two files are created in the same file-system directory (i.e.
** a database and its journal file) that the sector size will be the
** same for both.
*/

static int unixSectorSize(sqlite3_file *pFile){
  (void)pFile;

  return SQLITE_DEFAULT_SECTOR_SIZE;
}


















































































/*
** Return the device characteristics for the file.
**
** This VFS is set up to return SQLITE_IOCAP_POWERSAFE_OVERWRITE by default.
** However, that choice is contraversial since technically the underlying
** file system does not always provide powersafe overwrites.  (In other
................................................................................
** very rare.  And asserting PSOW makes a large reduction in the amount
** of required I/O for journaling, since a lot of padding is eliminated.
**  Hence, while POWERSAFE_OVERWRITE is on by default, there is a file-control
** available to turn it off and URI query parameter available to turn it off.
*/
static int unixDeviceCharacteristics(sqlite3_file *id){
  unixFile *p = (unixFile*)id;





  if( p->ctrlFlags & UNIXFILE_PSOW ){
    return SQLITE_IOCAP_POWERSAFE_OVERWRITE;
  }else{
    return 0;
  }

}

#ifndef SQLITE_OMIT_WAL


/*
** Object used to represent an shared memory buffer.  
................................................................................
        /* The requested memory region does not exist. If bExtend is set to
        ** false, exit early. *pp will be set to NULL and SQLITE_OK returned.
        **
        ** Alternatively, if bExtend is true, use ftruncate() to allocate
        ** the requested memory region.
        */
        if( !bExtend ) goto shmpage_out;







        if( robust_ftruncate(pShmNode->h, nByte) ){
          rc = unixLogError(SQLITE_IOERR_SHMSIZE, "ftruncate",
                            pShmNode->zFilename);
          goto shmpage_out;
        }

      }
    }

    /* Map the requested memory region into this processes address space. */
    apNew = (char **)sqlite3_realloc(
        pShmNode->apRegion, (iRegion+1)*sizeof(char *)
    );
................................................................................
  sqlite3_vfs *NotUsed,     /* VFS containing this as the xDelete method */
  const char *zPath,        /* Name of file to be deleted */
  int dirSync               /* If true, fsync() directory after deleting file */
){
  int rc = SQLITE_OK;
  UNUSED_PARAMETER(NotUsed);
  SimulateIOError(return SQLITE_IOERR_DELETE);
  if( osUnlink(zPath)==(-1) && errno!=ENOENT ){



    return unixLogError(SQLITE_IOERR_DELETE, "unlink", zPath);


  }
#ifndef SQLITE_DISABLE_DIRSYNC
  if( (dirSync & 1)!=0 ){
    int fd;
    rc = osOpenDirectory(zPath, &fd);
    if( rc==SQLITE_OK ){
#if OS_VXWORKS
................................................................................
#if SQLITE_OS_WINRT
      WIN32_FILE_ATTRIBUTE_DATA sAttrData;
      memset(&sAttrData, 0, sizeof(sAttrData));
      if ( osGetFileAttributesExW(zConverted, GetFileExInfoStandard,
                                  &sAttrData) ){
        attr = sAttrData.dwFileAttributes;
      }else{


        rc = SQLITE_OK; /* Already gone? */



        break;
      }
#else
      attr = osGetFileAttributesW(zConverted);
#endif
      if ( attr==INVALID_FILE_ATTRIBUTES ){


        rc = SQLITE_OK; /* Already gone? */



        break;
      }
      if ( attr&FILE_ATTRIBUTE_DIRECTORY ){
        rc = SQLITE_ERROR; /* Files only. */
        break;
      }
      if ( osDeleteFileW(zConverted) ){
................................................................................
    } while(1);
  }
#ifdef SQLITE_WIN32_HAS_ANSI
  else{
    do {
      attr = osGetFileAttributesA(zConverted);
      if ( attr==INVALID_FILE_ATTRIBUTES ){


        rc = SQLITE_OK; /* Already gone? */



        break;
      }
      if ( attr&FILE_ATTRIBUTE_DIRECTORY ){
        rc = SQLITE_ERROR; /* Files only. */
        break;
      }
      if ( osDeleteFileA(zConverted) ){
................................................................................
      if ( !retryIoerr(&cnt, &lastErrno) ){
        rc = SQLITE_ERROR; /* No more retries. */
        break;
      }
    } while(1);
  }
#endif
  if( rc ){
    rc = winLogError(SQLITE_IOERR_DELETE, lastErrno,
             "winDelete", zFilename);
  }else{
    logIoerr(cnt);
  }
  sqlite3_free(zConverted);
  OSTRACE(("DELETE \"%s\" %s\n", zFilename, (rc ? "failed" : "ok" )));
................................................................................
      pPager->journalOff = 0;
    }else{
      /* This branch may be executed with Pager.journalMode==MEMORY if
      ** a hot-journal was just rolled back. In this case the journal
      ** file should be closed and deleted. If this connection writes to
      ** the database file, it will do so using an in-memory journal. 
      */

      assert( pPager->journalMode==PAGER_JOURNALMODE_DELETE 
           || pPager->journalMode==PAGER_JOURNALMODE_MEMORY 
           || pPager->journalMode==PAGER_JOURNALMODE_WAL 
      );
      sqlite3OsClose(pPager->jfd);
      if( !pPager->tempFile ){
        rc = sqlite3OsDelete(pPager->pVfs, pPager->zJournal, 0);
      }
    }
  }

#ifdef SQLITE_CHECK_PAGES
  sqlite3PcacheIterateDirty(pPager->pPCache, pager_set_pagehash);
................................................................................
    int isWal;                    /* True if WAL file exists */
    Pgno nPage;                   /* Size of the database file */

    rc = pagerPagecount(pPager, &nPage);
    if( rc ) return rc;
    if( nPage==0 ){
      rc = sqlite3OsDelete(pPager->pVfs, pPager->zWal, 0);

      isWal = 0;
    }else{
      rc = sqlite3OsAccess(
          pPager->pVfs, pPager->zWal, SQLITE_ACCESS_EXISTS, &isWal
      );
    }
    if( rc==SQLITE_OK ){
................................................................................
  pPager->xBusyHandler = xBusyHandler;
  pPager->pBusyHandlerArg = pBusyHandlerArg;

  if( isOpen(pPager->fd) ){
    void **ap = (void **)&pPager->xBusyHandler;
    assert( ((int(*)(void *))(ap[0]))==xBusyHandler );
    assert( ap[1]==pBusyHandlerArg );
    sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_BUSYHANDLER, (void *)ap);
  }
}

/*
** Change the page size used by the Pager object. The new page size 
** is passed in *pPageSize.
**
................................................................................

/*
** Remember the SQL string for a prepared statement.
*/
SQLITE_PRIVATE void sqlite3VdbeSetSql(Vdbe *p, const char *z, int n, int isPrepareV2){
  assert( isPrepareV2==1 || isPrepareV2==0 );
  if( p==0 ) return;
#ifdef SQLITE_OMIT_TRACE
  if( !isPrepareV2 ) return;
#endif
  assert( p->zSql==0 );
  p->zSql = sqlite3DbStrNDup(p->db, z, n);
  p->isPrepareV2 = (u8)isPrepareV2;
}

................................................................................
  }
  assert( p->nOp>0 );
  assert( addr<p->nOp );
  if( addr<0 ){
    addr = p->nOp - 1;
  }
  pOp = &p->aOp[addr];

  freeP4(db, pOp->p4type, pOp->p4.p);
  pOp->p4.p = 0;
  if( n==P4_INT32 ){
    /* Note: this cast is safe, because the origin data point was an int
    ** that was cast to a (const char *). */
    pOp->p4.i = SQLITE_PTR_TO_INT(zP4);
    pOp->p4type = P4_INT32;
................................................................................
    db->errCode = rc;
  }else{
    sqlite3Error(db, rc, 0);
  }
  return rc;
}






















/*
** Clean up a VDBE after execution but do not delete the VDBE just yet.
** Write any error messages into *pzErrMsg.  Return the result code.
**
** After this routine is run, the VDBE should be ready to be executed
** again.
**
................................................................................

  /* If the VDBE has be run even partially, then transfer the error code
  ** and error message from the VDBE into the main database structure.  But
  ** if the VDBE has just been set to run but has not actually executed any
  ** instructions yet, leave the main database error information unchanged.
  */
  if( p->pc>=0 ){

    sqlite3VdbeTransferError(p);
    sqlite3DbFree(db, p->zErrMsg);
    p->zErrMsg = 0;
    if( p->runOnlyOnce ) p->expired = 1;
  }else if( p->rc && p->expired ){
    /* The expired flag was set on the VDBE before the first call
    ** to sqlite3_step(). For consistency (since sqlite3_step() was
................................................................................
  for(i=p->nzVar-1; i>=0; i--) sqlite3DbFree(db, p->azVar[i]);
  vdbeFreeOpArray(db, p->aOp, p->nOp);
  sqlite3DbFree(db, p->aLabel);
  sqlite3DbFree(db, p->aColName);
  sqlite3DbFree(db, p->zSql);
  sqlite3DbFree(db, p->pFree);
#if defined(SQLITE_ENABLE_TREE_EXPLAIN)
  sqlite3DbFree(db, p->zExplain);
  sqlite3DbFree(db, p->pExplain);
#endif
}

/*
** Delete an entire VDBE.
*/
................................................................................
    }else{
      assert( sqlite3BtreeCursorIsValid(u.ao.pCrsr) );
      VVA_ONLY(rc =) sqlite3BtreeDataSize(u.ao.pCrsr, &u.ao.payloadSize);
      assert( rc==SQLITE_OK );   /* DataSize() cannot fail */
    }
  }else if( ALWAYS(u.ao.pC->pseudoTableReg>0) ){
    u.ao.pReg = &aMem[u.ao.pC->pseudoTableReg];





    assert( u.ao.pReg->flags & MEM_Blob );
    assert( memIsValid(u.ao.pReg) );
    u.ao.payloadSize = u.ao.pReg->n;
    u.ao.zRec = u.ao.pReg->z;
    u.ao.pC->cacheStatus = (pOp->p5&OPFLAG_CLEARCACHE) ? CACHE_STALE : p->cacheCtr;
    assert( u.ao.payloadSize==0 || u.ao.zRec!=0 );
  }else{
................................................................................
    }
  }
  u.az.pCx->isOrdered = (pOp->p5!=BTREE_UNORDERED);
  u.az.pCx->isIndex = !u.az.pCx->isTable;
  break;
}

/* Opcode: OpenSorter P1 P2 * P4 *
**
** This opcode works like OP_OpenEphemeral except that it opens
** a transient index that is specifically designed to sort large
** tables using an external merge-sort algorithm.
*/
case OP_SorterOpen: {
#if 0  /* local variables moved into u.ba */
................................................................................
#else
  pOp->opcode = OP_OpenEphemeral;
  pc--;
#endif
  break;
}

/* Opcode: OpenPseudo P1 P2 P3 * *
**
** Open a new cursor that points to a fake table that contains a single
** row of data.  The content of that one row in the content of memory
** register P2.  In other words, cursor P1 becomes an alias for the 
** MEM_Blob content contained in register P2.

**
** A pseudo-table created by this opcode is used to hold a single
** row output from the sorter so that the row can be decomposed into
** individual columns using the OP_Column opcode.  The OP_Column opcode
** is the only cursor opcode that works with a pseudo-table.
**
** P3 is the number of fields in the records that will be stored by
................................................................................
  assert( pOp->p1>=0 );
  u.bb.pCx = allocateCursor(p, pOp->p1, pOp->p3, -1, 0);
  if( u.bb.pCx==0 ) goto no_mem;
  u.bb.pCx->nullRow = 1;
  u.bb.pCx->pseudoTableReg = pOp->p2;
  u.bb.pCx->isTable = 1;
  u.bb.pCx->isIndex = 0;

  break;
}

/* Opcode: Close P1 * * * *
**
** Close a cursor previously opened as P1.  If P1 is not
** currently open, this instruction is a no-op.
................................................................................
  sqlite3_vtab *pVtab;
  const sqlite3_module *pModule;
#endif /* local variables moved into u.bn */

  assert( pOp->p1>=0 && pOp->p1<p->nCursor );
  u.bn.pC = p->apCsr[pOp->p1];
  assert( u.bn.pC!=0 );
  assert( u.bn.pC->pseudoTableReg==0 );
  if( u.bn.pC->nullRow ){
    pOut->flags = MEM_Null;
    break;
  }else if( u.bn.pC->deferredMoveto ){
    u.bn.v = u.bn.pC->movetoTarget;
#ifndef SQLITE_OMIT_VIRTUALTABLE
  }else if( u.bn.pC->pVtabCursor ){
................................................................................
  ** than p->nBuffer bytes remaining in the PMA, read all remaining data.  */
  iBuf = p->iReadOff % p->nBuffer;
  if( iBuf==0 ){
    int nRead;                    /* Bytes to read from disk */
    int rc;                       /* sqlite3OsRead() return code */

    /* Determine how many bytes of data to read. */
    nRead = (int)(p->iEof - p->iReadOff);
    if( nRead>p->nBuffer ) nRead = p->nBuffer;



    assert( nRead>0 );

    /* Read data from the file. Return early if an error occurs. */
    rc = sqlite3OsRead(p->pFile, p->aBuffer, nRead, p->iReadOff);
    assert( rc!=SQLITE_IOERR_SHORT_READ );
    if( rc!=SQLITE_OK ) return rc;
  }
................................................................................
*/
SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *p){
  if( p->pMethods!=&JournalFileMethods ){
    return SQLITE_OK;
  }
  return createFile((JournalFile *)p);
}











/* 
** Return the number of bytes required to store a JournalFile that uses vfs
** pVfs to create the underlying on-disk files.
*/
SQLITE_PRIVATE int sqlite3JournalSize(sqlite3_vfs *pVfs){
  return (pVfs->szOsFile+sizeof(JournalFile));
................................................................................
    pNewItem->zName = sqlite3DbStrDup(db, pOldItem->zName);
    pNewItem->zAlias = sqlite3DbStrDup(db, pOldItem->zAlias);
    pNewItem->jointype = pOldItem->jointype;
    pNewItem->iCursor = pOldItem->iCursor;
    pNewItem->addrFillSub = pOldItem->addrFillSub;
    pNewItem->regReturn = pOldItem->regReturn;
    pNewItem->isCorrelated = pOldItem->isCorrelated;

    pNewItem->zIndex = sqlite3DbStrDup(db, pOldItem->zIndex);
    pNewItem->notIndexed = pOldItem->notIndexed;
    pNewItem->pIndex = pOldItem->pIndex;
    pTab = pNewItem->pTab = pOldItem->pTab;
    if( pTab ){
      pTab->nRef++;
    }
................................................................................
        }
        /* Make pExpr point to the appropriate pAggInfo->aFunc[] entry
        */
        assert( !ExprHasAnyProperty(pExpr, EP_TokenOnly|EP_Reduced) );
        ExprSetIrreducible(pExpr);
        pExpr->iAgg = (i16)i;
        pExpr->pAggInfo = pAggInfo;
      }
      return WRC_Prune;



    }
  }
  return WRC_Continue;
}
static int analyzeAggregatesInSelect(Walker *pWalker, Select *pSelect){
  UNUSED_PARAMETER(pWalker);
  UNUSED_PARAMETER(pSelect);
  return WRC_Continue;
}

/*
** Analyze the given expression looking for aggregate functions and
** for variables that need to be added to the pParse->aAgg[] array.
** Make additional entries to the pParse->aAgg[] array as necessary.

**
** This routine should only be called after the expression has been
** analyzed by sqlite3ResolveExprNames().
*/
SQLITE_PRIVATE void sqlite3ExprAnalyzeAggregates(NameContext *pNC, Expr *pExpr){
  Walker w;
  memset(&w, 0, sizeof(w));
................................................................................
  for(i=0, pItem=pList->a; i<pList->nSrc; i++, pItem++){
    if( pItem->zDatabase && sqlite3StrICmp(pItem->zDatabase, zDb) ){
      sqlite3ErrorMsg(pFix->pParse,
         "%s %T cannot reference objects in database %s",
         pFix->zType, pFix->pName, pItem->zDatabase);
      return 1;
    }
    sqlite3_free(pItem->zDatabase);
    pItem->zDatabase = 0;
    pItem->pSchema = pFix->pSchema;
#if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_TRIGGER)
    if( sqlite3FixSelect(pFix, pItem->pSelect) ) return 1;
    if( sqlite3FixExpr(pFix, pItem->pOn) ) return 1;
#endif
  }
................................................................................
      pFrom->a[0].pSelect = pDup;
      assert( pFrom->a[0].pOn==0 );
      assert( pFrom->a[0].pUsing==0 );
    }else{
      sqlite3SelectDelete(db, pDup);
    }
    pDup = sqlite3SelectNew(pParse, 0, pFrom, pWhere, 0, 0, 0, 0, 0, 0);

  }
  sqlite3SelectDestInit(&dest, SRT_EphemTab, iCur);
  sqlite3Select(pParse, pDup, &dest);
  sqlite3SelectDelete(db, pDup);
}
#endif /* !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) */

................................................................................
      double rVal = sqlite3_value_double(argv[0]);
      if( rVal<0 ) rVal = -rVal;
      sqlite3_result_double(context, rVal);
      break;
    }
  }
}



















































/*
** Implementation of the substr() function.
**
** substr(x,p1,p2)  returns p2 characters of x[] beginning with p1.
** p1 is 1-indexed.  So substr(x,1,1) returns the first character
** of x.  If x is text, then we actually count UTF-8 characters.
................................................................................
    FUNCTION(min,                0, 0, 1, 0                ),
    AGGREGATE(min,               1, 0, 1, minmaxStep,      minMaxFinalize ),
    FUNCTION(max,               -1, 1, 1, minmaxFunc       ),
    FUNCTION(max,                0, 1, 1, 0                ),
    AGGREGATE(max,               1, 1, 1, minmaxStep,      minMaxFinalize ),
    FUNCTION2(typeof,            1, 0, 0, typeofFunc,  SQLITE_FUNC_TYPEOF),
    FUNCTION2(length,            1, 0, 0, lengthFunc,  SQLITE_FUNC_LENGTH),

    FUNCTION(substr,             2, 0, 0, substrFunc       ),
    FUNCTION(substr,             3, 0, 0, substrFunc       ),
    FUNCTION(abs,                1, 0, 0, absFunc          ),
#ifndef SQLITE_OMIT_FLOATING_POINT
    FUNCTION(round,              1, 0, 0, roundFunc        ),
    FUNCTION(round,              2, 0, 0, roundFunc        ),
#endif
................................................................................
  Parse *p,       /* Generate code into this VDBE */
  int iCur,       /* The cursor number of the table */
  int iDb,        /* The database index in sqlite3.aDb[] */
  Table *pTab,    /* The table to be opened */
  int opcode      /* OP_OpenRead or OP_OpenWrite */
){
  Vdbe *v;
  if( IsVirtual(pTab) ) return;
  v = sqlite3GetVdbe(p);
  assert( opcode==OP_OpenWrite || opcode==OP_OpenRead );
  sqlite3TableLock(p, iDb, pTab->tnum, (opcode==OP_OpenWrite)?1:0, pTab->zName);
  sqlite3VdbeAddOp3(v, opcode, iCur, pTab->tnum, iDb);
  sqlite3VdbeChangeP4(v, -1, SQLITE_INT_TO_PTR(pTab->nCol), P4_INT32);
  VdbeComment((v, "%s", pTab->zName));
}
................................................................................
  for(i=0; !p->pPrior && i<pTabList->nSrc; i++){
    struct SrcList_item *pItem = &pTabList->a[i];
    SelectDest dest;
    Select *pSub = pItem->pSelect;
    int isAggSub;

    if( pSub==0 ) continue;







    if( pItem->addrFillSub ){

      sqlite3VdbeAddOp2(v, OP_Gosub, pItem->regReturn, pItem->addrFillSub);

      continue;
    }

    /* Increment Parse.nHeight by the height of the largest expression
    ** tree refered to by this, the parent select. The child select
    ** may contain expression trees of at most
    ** (SQLITE_MAX_EXPR_DEPTH-Parse.nHeight) height. This is a bit
................................................................................
    if( flattenSubquery(pParse, p, i, isAgg, isAggSub) ){
      /* This subquery can be absorbed into its parent. */
      if( isAggSub ){
        isAgg = 1;
        p->selFlags |= SF_Aggregate;
      }
      i = -1;





























    }else{
      /* Generate a subroutine that will fill an ephemeral table with
      ** the content of this subquery.  pItem->addrFillSub will point
      ** to the address of the generated subroutine.  pItem->regReturn
      ** is a register allocated to hold the subroutine return address
      */
      int topAddr;
................................................................................
    /* There is no point in building an automatic index for a single scan */
    return;
  }
  if( (pParse->db->flags & SQLITE_AutoIndex)==0 ){
    /* Automatic indices are disabled at run-time */
    return;
  }
  if( (p->cost.plan.wsFlags & WHERE_NOT_FULLSCAN)!=0 ){


    /* We already have some kind of index in use for this query. */
    return;




  }
  if( pSrc->notIndexed ){
    /* The NOT INDEXED clause appears in the SQL. */
    return;
  }
  if( pSrc->isCorrelated ){
    /* The source is a correlated sub-query. No point in indexing it. */
................................................................................
**
** If there was an INDEXED BY clause (pSrc->pIndex) attached to the table in
** the SQL statement, then this function only considers plans using the 
** named index. If no such plan is found, then the returned cost is
** SQLITE_BIG_DBL. If a plan is found that uses the named index, 
** then the cost is calculated in the usual way.
**
** If a NOT INDEXED clause (pSrc->notIndexed!=0) was attached to the table 
** in the SELECT statement, then no indexes are considered. However, the 
** selected plan may still take advantage of the built-in rowid primary key
** index.
*/
static void bestBtreeIndex(WhereBestIdx *p){
  Parse *pParse = p->pParse;  /* The parsing context */
  WhereClause *pWC = p->pWC;  /* The WHERE clause */
................................................................................
  ** row of the left table of the join.
  */
  if( pLevel->iFrom>0 && (pTabItem[0].jointype & JT_LEFT)!=0 ){
    pLevel->iLeftJoin = ++pParse->nMem;
    sqlite3VdbeAddOp2(v, OP_Integer, 0, pLevel->iLeftJoin);
    VdbeComment((v, "init LEFT JOIN no-match flag"));
  }











#ifndef SQLITE_OMIT_VIRTUALTABLE
  if(  (pLevel->plan.wsFlags & WHERE_VIRTUALTABLE)!=0 ){
    /* Case 0:  The table is a virtual-table.  Use the VFilter and VNext
    **          to access the data.
    */
    int iReg;   /* P3 Value for OP_VFilter */
................................................................................
        assert( sWBI.pSrc->pIndex==0 
                  || (sWBI.cost.plan.wsFlags & WHERE_NOT_FULLSCAN)==0
                  || sWBI.cost.plan.u.pIdx==sWBI.pSrc->pIndex );

        if( isOptimal && (sWBI.cost.plan.wsFlags & WHERE_NOT_FULLSCAN)==0 ){
          notIndexed |= m;
        }














        /* Conditions under which this table becomes the best so far:
        **
        **   (1) The table must not depend on other tables that have not
        **       yet run.  (In other words, it must not depend on tables
        **       in inner loops.)
        **
        **   (2) A full-table-scan plan cannot supercede indexed plan unless
        **       the full-table-scan is an "optimal" plan as defined above.
        **
        **   (3) All tables have an INDEXED BY clause or this table lacks an
        **       INDEXED BY clause or this table uses the specific
        **       index specified by its INDEXED BY clause.  This rule ensures
        **       that a best-so-far is always selected even if an impossible
        **       combination of INDEXED BY clauses are given.  The error
        **       will be detected and relayed back to the application later.
................................................................................
        **       The NEVER() comes about because rule (2) above prevents
        **       An indexable full-table-scan from reaching rule (3).
        **
        **   (4) The plan cost must be lower than prior plans, where "cost"
        **       is defined by the compareCost() function above. 
        */
        if( (sWBI.cost.used&sWBI.notValid)==0                    /* (1) */
            && (bestJ<0 || (notIndexed&m)!=0                     /* (2) */
                || (bestPlan.plan.wsFlags & WHERE_NOT_FULLSCAN)==0
                || (sWBI.cost.plan.wsFlags & WHERE_NOT_FULLSCAN)!=0)
            && (nUnconstrained==0 || sWBI.pSrc->pIndex==0        /* (3) */
                || NEVER((sWBI.cost.plan.wsFlags & WHERE_NOT_FULLSCAN)!=0))
            && (bestJ<0 || compareCost(&sWBI.cost, &bestPlan))   /* (4) */
        ){
          WHERETRACE(("   === table %d (%s) is best so far\n"
                      "       cost=%.1f, nRow=%.1f, nOBSat=%d, wsFlags=%08x\n",
                      j, sWBI.pSrc->pTab->zName,
................................................................................
      /* Do nothing */
    }else
#ifndef SQLITE_OMIT_VIRTUALTABLE
    if( (pLevel->plan.wsFlags & WHERE_VIRTUALTABLE)!=0 ){
      const char *pVTab = (const char *)sqlite3GetVTable(db, pTab);
      int iCur = pTabItem->iCursor;
      sqlite3VdbeAddOp4(v, OP_VOpen, iCur, 0, 0, pVTab, P4_VTAB);


    }else
#endif
    if( (pLevel->plan.wsFlags & WHERE_IDX_ONLY)==0
         && (wctrlFlags & WHERE_OMIT_OPEN_CLOSE)==0 ){
      int op = pWInfo->okOnePass ? OP_OpenWrite : OP_OpenRead;
      sqlite3OpenTable(pParse, pTabItem->iCursor, iDb, pTab, op);
      testcase( pTab->nCol==BMS-1 );
................................................................................

  /* If SQLite is already completely initialized, then this call
  ** to sqlite3_initialize() should be a no-op.  But the initialization
  ** must be complete.  So isInit must not be set until the very end
  ** of this routine.
  */
  if( sqlite3GlobalConfig.isInit ) return SQLITE_OK;








  /* Make sure the mutex subsystem is initialized.  If unable to 
  ** initialize the mutex subsystem, return early with the error.
  ** If the system is so sick that we are unable to allocate a mutex,
  ** there is not much SQLite is going to be able to do.
  **
  ** The mutex subsystem must take care of serializing its own
................................................................................
      break;
    }

    case SQLITE_CONFIG_COVERING_INDEX_SCAN: {
      sqlite3GlobalConfig.bUseCis = va_arg(ap, int);
      break;
    }










    default: {
      rc = SQLITE_ERROR;
      break;
    }
  }
  va_end(ap);
................................................................................
  */
  if( !forceZombie && connectionIsBusy(db) ){
    sqlite3Error(db, SQLITE_BUSY, "unable to close due to unfinalized "
       "statements or unfinished backups");
    sqlite3_mutex_leave(db->mutex);
    return SQLITE_BUSY;
  }








  /* Convert the connection into a zombie and then close it.
  */
  db->magic = SQLITE_MAGIC_ZOMBIE;
  sqlite3LeaveMutexAndCloseZombie(db);
  return SQLITE_OK;
}
................................................................................
  if( rc==SQLITE_NOMEM ){
    sqlite3_close(db);
    db = 0;
  }else if( rc!=SQLITE_OK ){
    db->magic = SQLITE_MAGIC_SICK;
  }
  *ppDb = db;







  return sqlite3ApiExit(0, rc);
}

/*
** Open a new database handle.
*/
SQLITE_API int sqlite3_open(
................................................................................
    ** operation N should be 0.  The idea is that a test program (like the
    ** SQL Logic Test or SLT test module) can run the same SQL multiple times
    ** with various optimizations disabled to verify that the same answer
    ** is obtained in every case.
    */
    case SQLITE_TESTCTRL_OPTIMIZATIONS: {
      sqlite3 *db = va_arg(ap, sqlite3*);
      db->dbOptFlags = (u8)(va_arg(ap, int) & 0xff);
      break;
    }

#ifdef SQLITE_N_KEYWORD
    /* sqlite3_test_control(SQLITE_TESTCTRL_ISKEYWORD, const char *zWord)
    **
    ** If zWord is a keyword recognized by the parser, then return the
................................................................................
** If successful, SQLITE_OK is returned. Otherwise, an SQLite error code.
*/
static int fts3PendingTermsAdd(
  Fts3Table *p,                   /* Table into which text will be inserted */
  int iLangid,                    /* Language id to use */
  const char *zText,              /* Text of document to be inserted */
  int iCol,                       /* Column into which text is being inserted */
  u32 *pnWord                     /* OUT: Number of tokens inserted */
){
  int rc;
  int iStart = 0;
  int iEnd = 0;
  int iPos = 0;
  int nWord = 0;

................................................................................
      rc = fts3PendingTermsAddOne(
          p, iCol, iPos, &pIndex->hPending, zToken, pIndex->nPrefix
      );
    }
  }

  pModule->xClose(pCsr);
  *pnWord = nWord;
  return (rc==SQLITE_DONE ? SQLITE_OK : rc);
}

/* 
** Calling this function indicates that subsequent calls to 
** fts3PendingTermsAdd() are to add term/position-list pairs for the
** contents of the document with docid iDocid.
................................................................................
** (an integer) of a row about to be deleted. Remove all terms from the
** full-text index.
*/
static void fts3DeleteTerms( 
  int *pRC,               /* Result code */
  Fts3Table *p,           /* The FTS table to delete from */
  sqlite3_value *pRowid,  /* The docid to be deleted */
  u32 *aSz                /* Sizes of deleted document written here */

){
  int rc;
  sqlite3_stmt *pSelect;


  if( *pRC ) return;
  rc = fts3SqlStmt(p, SQL_SELECT_CONTENT_BY_ROWID, &pSelect, &pRowid);
  if( rc==SQLITE_OK ){
    if( SQLITE_ROW==sqlite3_step(pSelect) ){
      int i;
      int iLangid = langidFromSelect(p, pSelect);
      rc = fts3PendingTermsDocid(p, iLangid, sqlite3_column_int64(pSelect, 0));
................................................................................
        aSz[p->nColumn] += sqlite3_column_bytes(pSelect, i);
      }
      if( rc!=SQLITE_OK ){
        sqlite3_reset(pSelect);
        *pRC = rc;
        return;
      }

    }
    rc = sqlite3_reset(pSelect);
  }else{
    sqlite3_reset(pSelect);
  }
  *pRC = rc;
}
................................................................................
      }
    }

    while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pStmt) ){
      int iCol;
      int iLangid = langidFromSelect(p, pStmt);
      rc = fts3PendingTermsDocid(p, iLangid, sqlite3_column_int64(pStmt, 0));
      aSz[p->nColumn] = 0;
      for(iCol=0; rc==SQLITE_OK && iCol<p->nColumn; iCol++){
        const char *z = (const char *) sqlite3_column_text(pStmt, iCol+1);
        rc = fts3PendingTermsAdd(p, iLangid, z, iCol, &aSz[iCol]);
        aSz[p->nColumn] += sqlite3_column_bytes(pStmt, iCol+1);
      }
      if( p->bHasDocsize ){
        fts3InsertDocsize(&rc, p, aSz);
................................................................................
** SQLite value pRowid contains the rowid of a row that may or may not be
** present in the FTS3 table. If it is, delete it and adjust the contents
** of subsiduary data structures accordingly.
*/
static int fts3DeleteByRowid(
  Fts3Table *p, 
  sqlite3_value *pRowid, 
  int *pnDoc,
  u32 *aSzDel
){
  int isEmpty = 0;





  int rc = fts3IsEmpty(p, pRowid, &isEmpty);
  if( rc==SQLITE_OK ){
    if( isEmpty ){
      /* Deleting this row means the whole table is empty. In this case
      ** delete the contents of all three tables and throw away any
      ** data in the pendingTerms hash table.  */
      rc = fts3DeleteAll(p, 1);
      *pnDoc = *pnDoc - 1;


    }else{
      fts3DeleteTerms(&rc, p, pRowid, aSzDel);

      if( p->zContentTbl==0 ){
        fts3SqlExec(&rc, p, SQL_DELETE_CONTENT, &pRowid);
        if( sqlite3_changes(p->db) ) *pnDoc = *pnDoc - 1;
      }else{
        *pnDoc = *pnDoc - 1;
      }
      if( p->bHasDocsize ){
        fts3SqlExec(&rc, p, SQL_DELETE_DOCSIZE, &pRowid);

      }
    }
  }

  return rc;
}

................................................................................
  sqlite3_value **apVal,          /* Array of arguments */
  sqlite_int64 *pRowid            /* OUT: The affected (or effected) rowid */
){
  Fts3Table *p = (Fts3Table *)pVtab;
  int rc = SQLITE_OK;             /* Return Code */
  int isRemove = 0;               /* True for an UPDATE or DELETE */
  u32 *aSzIns = 0;                /* Sizes of inserted documents */
  u32 *aSzDel;                    /* Sizes of deleted documents */
  int nChng = 0;                  /* Net change in number of documents */
  int bInsertDone = 0;

  assert( p->pSegments==0 );
  assert( 
      nArg==1                     /* DELETE operations */
   || nArg==(2 + p->nColumn + 3)  /* INSERT or UPDATE operations */
................................................................................

  if( nArg>1 && sqlite3_value_int(apVal[2 + p->nColumn + 2])<0 ){
    rc = SQLITE_CONSTRAINT;
    goto update_out;
  }

  /* Allocate space to hold the change in document sizes */
  aSzIns = sqlite3_malloc( sizeof(aSzIns[0])*(p->nColumn+1)*2 );
  if( aSzIns==0 ){
    rc = SQLITE_NOMEM;
    goto update_out;
  }
  aSzDel = &aSzIns[p->nColumn+1];
  memset(aSzIns, 0, sizeof(aSzIns[0])*(p->nColumn+1)*2);

  /* If this is an INSERT operation, or an UPDATE that modifies the rowid
  ** value, then this operation requires constraint handling.
  **
  ** If the on-conflict mode is REPLACE, this means that the existing row
  ** should be deleted from the database before inserting the new row. Or,
  ** if the on-conflict mode is other than REPLACE, then this method must
................................................................................
  }

  if( p->bFts4 ){
    fts3UpdateDocTotals(&rc, p, aSzIns, aSzDel, nChng);
  }

 update_out:
  sqlite3_free(aSzIns);
  sqlite3Fts3SegmentsClose(p);
  return rc;
}

/* 
** Flush any data in the pending-terms hash table to disk. If successful,
** merge all segments in the database (including the new segment, if 

**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.7.15"
#define SQLITE_VERSION_NUMBER 3007015
#define SQLITE_SOURCE_ID      "2012-12-06 04:33:13 d507648d820cfea70e17f3d21c35c932a2d20367"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version, sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
................................................................................
#define SQLITE_IOERR_CLOSE             (SQLITE_IOERR | (16<<8))
#define SQLITE_IOERR_DIR_CLOSE         (SQLITE_IOERR | (17<<8))
#define SQLITE_IOERR_SHMOPEN           (SQLITE_IOERR | (18<<8))
#define SQLITE_IOERR_SHMSIZE           (SQLITE_IOERR | (19<<8))
#define SQLITE_IOERR_SHMLOCK           (SQLITE_IOERR | (20<<8))
#define SQLITE_IOERR_SHMMAP            (SQLITE_IOERR | (21<<8))
#define SQLITE_IOERR_SEEK              (SQLITE_IOERR | (22<<8))
#define SQLITE_IOERR_DELETE_NOENT      (SQLITE_IOERR | (23<<8))
#define SQLITE_LOCKED_SHAREDCACHE      (SQLITE_LOCKED |  (1<<8))
#define SQLITE_BUSY_RECOVERY           (SQLITE_BUSY   |  (1<<8))
#define SQLITE_CANTOPEN_NOTEMPDIR      (SQLITE_CANTOPEN | (1<<8))
#define SQLITE_CANTOPEN_ISDIR          (SQLITE_CANTOPEN | (2<<8))
#define SQLITE_CANTOPEN_FULLPATH       (SQLITE_CANTOPEN | (3<<8))
#define SQLITE_CORRUPT_VTAB            (SQLITE_CORRUPT | (1<<8))
#define SQLITE_READONLY_RECOVERY       (SQLITE_READONLY | (1<<8))
................................................................................
** without change even with newer versions of SQLite.
**
** [[SQLITE_CONFIG_PCACHE]] [[SQLITE_CONFIG_GETPCACHE]]
** <dt>SQLITE_CONFIG_PCACHE and SQLITE_CONFIG_GETPCACHE
** <dd> These options are obsolete and should not be used by new code.
** They are retained for backwards compatibility but are now no-ops.
** </dl>
**
** [[SQLITE_CONFIG_SQLLOG]]
** <dt>SQLITE_CONFIG_SQLLOG
** <dd>This option is only available if sqlite is compiled with the
** SQLITE_ENABLE_SQLLOG pre-processor macro defined. The first argument should
** be a pointer to a function of type void(*)(void*,sqlite3*,const char*, int).
** The second should be of type (void*). The callback is invoked by the library
** in three separate circumstances, identified by the value passed as the
** fourth parameter. If the fourth parameter is 0, then the database connection
** passed as the second argument has just been opened. The third argument
** points to a buffer containing the name of the main database file. If the
** fourth parameter is 1, then the SQL statement that the third parameter
** points to has just been executed. Or, if the fourth parameter is 2, then
** the connection being passed as the second parameter is being closed. The
** third parameter is passed NULL In this case.
** </dl>
*/
#define SQLITE_CONFIG_SINGLETHREAD  1  /* nil */
#define SQLITE_CONFIG_MULTITHREAD   2  /* nil */
#define SQLITE_CONFIG_SERIALIZED    3  /* nil */
#define SQLITE_CONFIG_MALLOC        4  /* sqlite3_mem_methods* */
#define SQLITE_CONFIG_GETMALLOC     5  /* sqlite3_mem_methods* */
#define SQLITE_CONFIG_SCRATCH       6  /* void*, int sz, int N */
................................................................................
#define SQLITE_CONFIG_PCACHE       14  /* no-op */
#define SQLITE_CONFIG_GETPCACHE    15  /* no-op */
#define SQLITE_CONFIG_LOG          16  /* xFunc, void* */
#define SQLITE_CONFIG_URI          17  /* int */
#define SQLITE_CONFIG_PCACHE2      18  /* sqlite3_pcache_methods2* */
#define SQLITE_CONFIG_GETPCACHE2   19  /* sqlite3_pcache_methods2* */
#define SQLITE_CONFIG_COVERING_INDEX_SCAN 20  /* int */
#define SQLITE_CONFIG_SQLLOG       21  /* xSqllog, void* */

/*
** CAPI3REF: Database Connection Configuration Options
**
** These constants are the available integer configuration options that
** can be passed as the second argument to the [sqlite3_db_config()] interface.
**
................................................................................
  Db *aDb;                      /* All backends */
  int nDb;                      /* Number of backends currently in use */
  int flags;                    /* Miscellaneous flags. See below */
  i64 lastRowid;                /* ROWID of most recent insert (see above) */
  unsigned int openFlags;       /* Flags passed to sqlite3_vfs.xOpen() */
  int errCode;                  /* Most recent error code (SQLITE_*) */
  int errMask;                  /* & result codes with this before returning */
  u16 dbOptFlags;               /* Flags to enable/disable optimizations */
  u8 autoCommit;                /* The auto-commit flag. */
  u8 temp_store;                /* 1: file 2: memory 0: default */
  u8 mallocFailed;              /* True if we have seen a malloc failure */
  u8 dfltLockMode;              /* Default locking-mode for attached dbs */
  signed char nextAutovac;      /* Autovac setting after VACUUM if >=0 */
  u8 suppressErr;               /* Do not issue error messages if true */
  u8 vtabOnConflict;            /* Value to return for s3_vtab_on_conflict() */
................................................................................
#define SQLITE_ColumnCache    0x0002   /* Column cache */
#define SQLITE_GroupByOrder   0x0004   /* GROUPBY cover of ORDERBY */
#define SQLITE_FactorOutConst 0x0008   /* Constant factoring */
#define SQLITE_IdxRealAsInt   0x0010   /* Store REAL as INT in indices */
#define SQLITE_DistinctOpt    0x0020   /* DISTINCT using indexes */
#define SQLITE_CoverIdxScan   0x0040   /* Covering index scans */
#define SQLITE_OrderByIdxJoin 0x0080   /* ORDER BY of joins via index */
#define SQLITE_SubqCoroutine  0x0100   /* Evaluate subqueries as coroutines */
#define SQLITE_AllOpts        0xffff   /* All optimizations */

/*
** Macros for testing whether or not optimizations are enabled or disabled.
*/
#ifndef SQLITE_OMIT_BUILTIN_TEST
#define OptimizationDisabled(db, mask)  (((db)->dbOptFlags&(mask))!=0)
#define OptimizationEnabled(db, mask)   (((db)->dbOptFlags&(mask))==0)
................................................................................
#define COLFLAG_HIDDEN   0x0002    /* A hidden column in a virtual table */

/*
** A "Collating Sequence" is defined by an instance of the following
** structure. Conceptually, a collating sequence consists of a name and
** a comparison routine that defines the order of that sequence.
**












** If CollSeq.xCmp is NULL, it means that the
** collating sequence is undefined.  Indices built on an undefined
** collating sequence may not be read or written.
*/
struct CollSeq {
  char *zName;          /* Name of the collating sequence, UTF-8 encoded */
  u8 enc;               /* Text encoding handled by xCmp() */
  void *pUser;          /* First argument to xCmp() */
................................................................................
    char *zName;      /* Name of the table */
    char *zAlias;     /* The "B" part of a "A AS B" phrase.  zName is the "A" */
    Table *pTab;      /* An SQL table corresponding to zName */
    Select *pSelect;  /* A SELECT statement used in place of a table name */
    int addrFillSub;  /* Address of subroutine to manifest a subquery */
    int regReturn;    /* Register holding return address of addrFillSub */
    u8 jointype;      /* Type of join between this able and the previous */
    unsigned notIndexed :1;    /* True if there is a NOT INDEXED clause */
    unsigned isCorrelated :1;  /* True if sub-query is correlated */
    unsigned viaCoroutine :1;  /* Implemented as a co-routine */
#ifndef SQLITE_OMIT_EXPLAIN
    u8 iSelectId;     /* If pSelect!=0, the id of the sub-select in EQP */
#endif
    int iCursor;      /* The VDBE cursor number used to access this table */
    Expr *pOn;        /* The ON clause of a join */
    IdList *pUsing;   /* The USING clause of a join */
    Bitmask colUsed;  /* Bit N (1<<N) set if column N of pTab is used */
................................................................................
      struct InLoop {
        int iCur;              /* The VDBE cursor used by this IN operator */
        int addrInTop;         /* Top of the IN loop */
      } *aInLoop;           /* Information about each nested IN operator */
    } in;                 /* Used when plan.wsFlags&WHERE_IN_ABLE */
    Index *pCovidx;       /* Possible covering index for WHERE_MULTI_OR */
  } u;
  double rOptCost;      /* "Optimal" cost for this level */

  /* The following field is really not part of the current level.  But
  ** we need a place to cache virtual table index information for each
  ** virtual table in the FROM clause and the WhereLevel structure is
  ** a convenient place since there is one WhereLevel for each FROM clause
  ** element.
  */
................................................................................
  Expr *pOffset;         /* OFFSET expression. NULL means not used. */
};

/*
** Allowed values for Select.selFlags.  The "SF" prefix stands for
** "Select Flag".
*/
#define SF_Distinct        0x0001  /* Output should be DISTINCT */
#define SF_Resolved        0x0002  /* Identifiers have been resolved */
#define SF_Aggregate       0x0004  /* Contains aggregate functions */
#define SF_UsesEphemeral   0x0008  /* Uses the OpenEphemeral opcode */
#define SF_Expanded        0x0010  /* sqlite3SelectExpand() called on this */
#define SF_HasTypeInfo     0x0020  /* FROM subqueries have Table metadata */
#define SF_UseSorter       0x0040  /* Sort using a sorter */
#define SF_Values          0x0080  /* Synthesized from VALUES clause */
#define SF_Materialize     0x0100  /* Force materialization of views */


/*
** The results of a select can be distributed in several ways.  The
** "SRT" prefix means "SELECT Result Type".
*/
#define SRT_Union        1  /* Store result as keys in an index */
................................................................................
  int isMallocInit;                 /* True after malloc is initialized */
  int isPCacheInit;                 /* True after malloc is initialized */
  sqlite3_mutex *pInitMutex;        /* Mutex used by sqlite3_initialize() */
  int nRefInitMutex;                /* Number of users of pInitMutex */
  void (*xLog)(void*,int,const char*); /* Function for logging */
  void *pLogArg;                       /* First argument to xLog() */
  int bLocaltimeFault;              /* True to fail localtime() calls */
#ifdef SQLITE_ENABLE_SQLLOG
  void(*xSqllog)(void*,sqlite3*,const char*, int);
  void *pSqllogArg;
#endif
};

/*
** Context pointer passed down through the tree-walk.
*/
struct Walker {
  int (*xExprCallback)(Walker*, Expr*);     /* Callback for expressions */
................................................................................
#define IN_INDEX_INDEX           3
SQLITE_PRIVATE int sqlite3FindInIndex(Parse *, Expr *, int*);

#ifdef SQLITE_ENABLE_ATOMIC_WRITE
SQLITE_PRIVATE   int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int);
SQLITE_PRIVATE   int sqlite3JournalSize(sqlite3_vfs *);
SQLITE_PRIVATE   int sqlite3JournalCreate(sqlite3_file *);
SQLITE_PRIVATE   int sqlite3JournalExists(sqlite3_file *p);
#else
  #define sqlite3JournalSize(pVfs) ((pVfs)->szOsFile)
  #define sqlite3JournalExists(p) 1
#endif

SQLITE_PRIVATE void sqlite3MemJournalOpen(sqlite3_file *);
SQLITE_PRIVATE int sqlite3MemJournalSize(void);
SQLITE_PRIVATE int sqlite3IsMemJournal(sqlite3_file *);

#if SQLITE_MAX_EXPR_DEPTH>0
................................................................................
   0,                         /* isMallocInit */
   0,                         /* isPCacheInit */
   0,                         /* pInitMutex */
   0,                         /* nRefInitMutex */
   0,                         /* xLog */
   0,                         /* pLogArg */
   0,                         /* bLocaltimeFault */
#ifdef SQLITE_ENABLE_SQLLOG
   0,                         /* xSqllog */
   0                          /* pSqllogArg */
#endif
};


/*
** Hash table for global functions - functions common to all
** database connections.  After initialization, this table is
** read-only.
................................................................................
  Bool useRandomRowid;  /* Generate new record numbers semi-randomly */
  Bool nullRow;         /* True if pointing to a row with no data */
  Bool deferredMoveto;  /* A call to sqlite3BtreeMoveto() is needed */
  Bool isTable;         /* True if a table requiring integer keys */
  Bool isIndex;         /* True if an index containing keys only - no data */
  Bool isOrdered;       /* True if the underlying table is BTREE_UNORDERED */
  Bool isSorter;        /* True if a new-style sorter */
  Bool multiPseudo;     /* Multi-register pseudo-cursor */
  sqlite3_vtab_cursor *pVtabCursor;  /* The cursor for a virtual table */
  const sqlite3_module *pModule;     /* Module for cursor pVtabCursor */
  i64 seqCount;         /* Sequence counter */
  i64 movetoTarget;     /* Argument to the deferred sqlite3BtreeMoveto() */
  i64 lastRowid;        /* Last rowid from a Next or NextIdx operation */
  VdbeSorter *pSorter;  /* Sorter object for OP_SorterOpen cursors */

................................................................................
    case SQLITE_DBSTATUS_STMT_USED: {
      struct Vdbe *pVdbe;         /* Used to iterate through VMs */
      int nByte = 0;              /* Used to accumulate return value */

      db->pnBytesFreed = &nByte;
      for(pVdbe=db->pVdbe; pVdbe; pVdbe=pVdbe->pNext){
        sqlite3VdbeClearObject(db, pVdbe);
        sqlite3DbFree(db, pVdbe);
      }
      db->pnBytesFreed = 0;

      *pHighwater = 0;
      *pCurrent = nByte;

      break;
................................................................................
**   *  sqlite3_vfs method implementations.
**   *  Locking primitives for the proxy uber-locking-method. (MacOSX only)
**   *  Definitions of sqlite3_vfs objects for all locking methods
**      plus implementations of sqlite3_os_init() and sqlite3_os_end().
*/
#if SQLITE_OS_UNIX              /* This file is used on unix only */

/* Use posix_fallocate() if it is available
*/
#if !defined(HAVE_POSIX_FALLOCATE) \
      && (_XOPEN_SOURCE >= 600 || _POSIX_C_SOURCE >= 200112L)
# define HAVE_POSIX_FALLOCATE 1
#endif

/*
** There are various methods for file locking used for concurrency
** control:
**
**   1. POSIX locking (the default),
**   2. No locking,
**   3. Dot-file locking,
................................................................................
  unsigned short int ctrlFlags;       /* Behavioral bits.  UNIXFILE_* flags */
  int lastErrno;                      /* The unix errno from last I/O error */
  void *lockingContext;               /* Locking style specific state */
  UnixUnusedFd *pUnused;              /* Pre-allocated UnixUnusedFd */
  const char *zPath;                  /* Name of the file */
  unixShm *pShm;                      /* Shared memory segment information */
  int szChunk;                        /* Configured by FCNTL_CHUNK_SIZE */
#ifdef __QNXNTO__
  int sectorSize;                     /* Device sector size */
  int deviceCharacteristics;          /* Precomputed device characteristics */
#endif
#if SQLITE_ENABLE_LOCKING_STYLE
  int openFlags;                      /* The flags specified at open() */
#endif
#if SQLITE_ENABLE_LOCKING_STYLE || defined(__APPLE__)
  unsigned fsFlags;                   /* cached details from statfs() */
#endif
#if OS_VXWORKS
................................................................................
** larger for some devices.
**
** SQLite code assumes this function cannot fail. It also assumes that
** if two files are created in the same file-system directory (i.e.
** a database and its journal file) that the sector size will be the
** same for both.
*/
#ifndef __QNXNTO__ 
static int unixSectorSize(sqlite3_file *NotUsed){

  UNUSED_PARAMETER(NotUsed);
  return SQLITE_DEFAULT_SECTOR_SIZE;
}
#endif

/*
** The following version of unixSectorSize() is optimized for QNX.
*/
#ifdef __QNXNTO__
#include <sys/dcmd_blk.h>
#include <sys/statvfs.h>
static int unixSectorSize(sqlite3_file *id){
  unixFile *pFile = (unixFile*)id;
  if( pFile->sectorSize == 0 ){
    struct statvfs fsInfo;
       
    /* Set defaults for non-supported filesystems */
    pFile->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE;
    pFile->deviceCharacteristics = 0;
    if( fstatvfs(pFile->h, &fsInfo) == -1 ) {
      return pFile->sectorSize;
    }

    if( !strcmp(fsInfo.f_basetype, "tmp") ) {
      pFile->sectorSize = fsInfo.f_bsize;
      pFile->deviceCharacteristics =
        SQLITE_IOCAP_ATOMIC4K |       /* All ram filesystem writes are atomic */
        SQLITE_IOCAP_SAFE_APPEND |    /* growing the file does not occur until
                                      ** the write succeeds */
        SQLITE_IOCAP_SEQUENTIAL |     /* The ram filesystem has no write behind
                                      ** so it is ordered */
        0;
    }else if( strstr(fsInfo.f_basetype, "etfs") ){
      pFile->sectorSize = fsInfo.f_bsize;
      pFile->deviceCharacteristics =
        /* etfs cluster size writes are atomic */
        (pFile->sectorSize / 512 * SQLITE_IOCAP_ATOMIC512) |
        SQLITE_IOCAP_SAFE_APPEND |    /* growing the file does not occur until
                                      ** the write succeeds */
        SQLITE_IOCAP_SEQUENTIAL |     /* The ram filesystem has no write behind
                                      ** so it is ordered */
        0;
    }else if( !strcmp(fsInfo.f_basetype, "qnx6") ){
      pFile->sectorSize = fsInfo.f_bsize;
      pFile->deviceCharacteristics =
        SQLITE_IOCAP_ATOMIC |         /* All filesystem writes are atomic */
        SQLITE_IOCAP_SAFE_APPEND |    /* growing the file does not occur until
                                      ** the write succeeds */
        SQLITE_IOCAP_SEQUENTIAL |     /* The ram filesystem has no write behind
                                      ** so it is ordered */
        0;
    }else if( !strcmp(fsInfo.f_basetype, "qnx4") ){
      pFile->sectorSize = fsInfo.f_bsize;
      pFile->deviceCharacteristics =
        /* full bitset of atomics from max sector size and smaller */
        ((pFile->sectorSize / 512 * SQLITE_IOCAP_ATOMIC512) << 1) - 2 |
        SQLITE_IOCAP_SEQUENTIAL |     /* The ram filesystem has no write behind
                                      ** so it is ordered */
        0;
    }else if( strstr(fsInfo.f_basetype, "dos") ){
      pFile->sectorSize = fsInfo.f_bsize;
      pFile->deviceCharacteristics =
        /* full bitset of atomics from max sector size and smaller */
        ((pFile->sectorSize / 512 * SQLITE_IOCAP_ATOMIC512) << 1) - 2 |
        SQLITE_IOCAP_SEQUENTIAL |     /* The ram filesystem has no write behind
                                      ** so it is ordered */
        0;
    }else{
      pFile->deviceCharacteristics =
        SQLITE_IOCAP_ATOMIC512 |      /* blocks are atomic */
        SQLITE_IOCAP_SAFE_APPEND |    /* growing the file does not occur until
                                      ** the write succeeds */
        0;
    }
  }
  /* Last chance verification.  If the sector size isn't a multiple of 512
  ** then it isn't valid.*/
  if( pFile->sectorSize % 512 != 0 ){
    pFile->deviceCharacteristics = 0;
    pFile->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE;
  }
  return pFile->sectorSize;
}
#endif /* __QNXNTO__ */

/*
** Return the device characteristics for the file.
**
** This VFS is set up to return SQLITE_IOCAP_POWERSAFE_OVERWRITE by default.
** However, that choice is contraversial since technically the underlying
** file system does not always provide powersafe overwrites.  (In other
................................................................................
** very rare.  And asserting PSOW makes a large reduction in the amount
** of required I/O for journaling, since a lot of padding is eliminated.
**  Hence, while POWERSAFE_OVERWRITE is on by default, there is a file-control
** available to turn it off and URI query parameter available to turn it off.
*/
static int unixDeviceCharacteristics(sqlite3_file *id){
  unixFile *p = (unixFile*)id;
  int rc = 0;
#ifdef __QNXNTO__
  if( p->sectorSize==0 ) unixSectorSize(id);
  rc = p->deviceCharacteristics;
#endif
  if( p->ctrlFlags & UNIXFILE_PSOW ){
    rc |= SQLITE_IOCAP_POWERSAFE_OVERWRITE;


  }
  return rc;
}

#ifndef SQLITE_OMIT_WAL


/*
** Object used to represent an shared memory buffer.  
................................................................................
        /* The requested memory region does not exist. If bExtend is set to
        ** false, exit early. *pp will be set to NULL and SQLITE_OK returned.
        **
        ** Alternatively, if bExtend is true, use ftruncate() to allocate
        ** the requested memory region.
        */
        if( !bExtend ) goto shmpage_out;
#if defined(HAVE_POSIX_FALLOCATE) && HAVE_POSIX_FALLOCATE
        if( osFallocate(pShmNode->h, sStat.st_size, nByte)!=0 ){
          rc = unixLogError(SQLITE_IOERR_SHMSIZE, "fallocate",
                            pShmNode->zFilename);
          goto shmpage_out;
        }
#else
        if( robust_ftruncate(pShmNode->h, nByte) ){
          rc = unixLogError(SQLITE_IOERR_SHMSIZE, "ftruncate",
                            pShmNode->zFilename);
          goto shmpage_out;
        }
#endif
      }
    }

    /* Map the requested memory region into this processes address space. */
    apNew = (char **)sqlite3_realloc(
        pShmNode->apRegion, (iRegion+1)*sizeof(char *)
    );
................................................................................
  sqlite3_vfs *NotUsed,     /* VFS containing this as the xDelete method */
  const char *zPath,        /* Name of file to be deleted */
  int dirSync               /* If true, fsync() directory after deleting file */
){
  int rc = SQLITE_OK;
  UNUSED_PARAMETER(NotUsed);
  SimulateIOError(return SQLITE_IOERR_DELETE);
  if( osUnlink(zPath)==(-1) ){
    if( errno==ENOENT ){
      rc = SQLITE_IOERR_DELETE_NOENT;
    }else{
      rc = unixLogError(SQLITE_IOERR_DELETE, "unlink", zPath);
    }
    return rc;
  }
#ifndef SQLITE_DISABLE_DIRSYNC
  if( (dirSync & 1)!=0 ){
    int fd;
    rc = osOpenDirectory(zPath, &fd);
    if( rc==SQLITE_OK ){
#if OS_VXWORKS
................................................................................
#if SQLITE_OS_WINRT
      WIN32_FILE_ATTRIBUTE_DATA sAttrData;
      memset(&sAttrData, 0, sizeof(sAttrData));
      if ( osGetFileAttributesExW(zConverted, GetFileExInfoStandard,
                                  &sAttrData) ){
        attr = sAttrData.dwFileAttributes;
      }else{
        lastErrno = osGetLastError();
        if( lastErrno==ERROR_FILE_NOT_FOUND || lastErrno==ERROR_PATH_NOT_FOUND ){
          rc = SQLITE_IOERR_DELETE_NOENT; /* Already gone? */
        }else{
          rc = SQLITE_ERROR;
        }
        break;
      }
#else
      attr = osGetFileAttributesW(zConverted);
#endif
      if ( attr==INVALID_FILE_ATTRIBUTES ){
        lastErrno = osGetLastError();
        if( lastErrno==ERROR_FILE_NOT_FOUND || lastErrno==ERROR_PATH_NOT_FOUND ){
          rc = SQLITE_IOERR_DELETE_NOENT; /* Already gone? */
        }else{
          rc = SQLITE_ERROR;
        }
        break;
      }
      if ( attr&FILE_ATTRIBUTE_DIRECTORY ){
        rc = SQLITE_ERROR; /* Files only. */
        break;
      }
      if ( osDeleteFileW(zConverted) ){
................................................................................
    } while(1);
  }
#ifdef SQLITE_WIN32_HAS_ANSI
  else{
    do {
      attr = osGetFileAttributesA(zConverted);
      if ( attr==INVALID_FILE_ATTRIBUTES ){
        lastErrno = osGetLastError();
        if( lastErrno==ERROR_FILE_NOT_FOUND || lastErrno==ERROR_PATH_NOT_FOUND ){
          rc = SQLITE_IOERR_DELETE_NOENT; /* Already gone? */
        }else{
          rc = SQLITE_ERROR;
        }
        break;
      }
      if ( attr&FILE_ATTRIBUTE_DIRECTORY ){
        rc = SQLITE_ERROR; /* Files only. */
        break;
      }
      if ( osDeleteFileA(zConverted) ){
................................................................................
      if ( !retryIoerr(&cnt, &lastErrno) ){
        rc = SQLITE_ERROR; /* No more retries. */
        break;
      }
    } while(1);
  }
#endif
  if( rc && rc!=SQLITE_IOERR_DELETE_NOENT ){
    rc = winLogError(SQLITE_IOERR_DELETE, lastErrno,
             "winDelete", zFilename);
  }else{
    logIoerr(cnt);
  }
  sqlite3_free(zConverted);
  OSTRACE(("DELETE \"%s\" %s\n", zFilename, (rc ? "failed" : "ok" )));
................................................................................
      pPager->journalOff = 0;
    }else{
      /* This branch may be executed with Pager.journalMode==MEMORY if
      ** a hot-journal was just rolled back. In this case the journal
      ** file should be closed and deleted. If this connection writes to
      ** the database file, it will do so using an in-memory journal. 
      */
      int bDelete = (!pPager->tempFile && sqlite3JournalExists(pPager->jfd));
      assert( pPager->journalMode==PAGER_JOURNALMODE_DELETE 
           || pPager->journalMode==PAGER_JOURNALMODE_MEMORY 
           || pPager->journalMode==PAGER_JOURNALMODE_WAL 
      );
      sqlite3OsClose(pPager->jfd);
      if( bDelete ){
        rc = sqlite3OsDelete(pPager->pVfs, pPager->zJournal, 0);
      }
    }
  }

#ifdef SQLITE_CHECK_PAGES
  sqlite3PcacheIterateDirty(pPager->pPCache, pager_set_pagehash);
................................................................................
    int isWal;                    /* True if WAL file exists */
    Pgno nPage;                   /* Size of the database file */

    rc = pagerPagecount(pPager, &nPage);
    if( rc ) return rc;
    if( nPage==0 ){
      rc = sqlite3OsDelete(pPager->pVfs, pPager->zWal, 0);
      if( rc==SQLITE_IOERR_DELETE_NOENT ) rc = SQLITE_OK;
      isWal = 0;
    }else{
      rc = sqlite3OsAccess(
          pPager->pVfs, pPager->zWal, SQLITE_ACCESS_EXISTS, &isWal
      );
    }
    if( rc==SQLITE_OK ){
................................................................................
  pPager->xBusyHandler = xBusyHandler;
  pPager->pBusyHandlerArg = pBusyHandlerArg;

  if( isOpen(pPager->fd) ){
    void **ap = (void **)&pPager->xBusyHandler;
    assert( ((int(*)(void *))(ap[0]))==xBusyHandler );
    assert( ap[1]==pBusyHandlerArg );
    sqlite3OsFileControlHint(pPager->fd, SQLITE_FCNTL_BUSYHANDLER, (void *)ap);
  }
}

/*
** Change the page size used by the Pager object. The new page size 
** is passed in *pPageSize.
**
................................................................................

/*
** Remember the SQL string for a prepared statement.
*/
SQLITE_PRIVATE void sqlite3VdbeSetSql(Vdbe *p, const char *z, int n, int isPrepareV2){
  assert( isPrepareV2==1 || isPrepareV2==0 );
  if( p==0 ) return;
#if defined(SQLITE_OMIT_TRACE) && !defined(SQLITE_ENABLE_SQLLOG)
  if( !isPrepareV2 ) return;
#endif
  assert( p->zSql==0 );
  p->zSql = sqlite3DbStrNDup(p->db, z, n);
  p->isPrepareV2 = (u8)isPrepareV2;
}

................................................................................
  }
  assert( p->nOp>0 );
  assert( addr<p->nOp );
  if( addr<0 ){
    addr = p->nOp - 1;
  }
  pOp = &p->aOp[addr];
  assert( pOp->p4type==P4_NOTUSED || pOp->p4type==P4_INT32 );
  freeP4(db, pOp->p4type, pOp->p4.p);
  pOp->p4.p = 0;
  if( n==P4_INT32 ){
    /* Note: this cast is safe, because the origin data point was an int
    ** that was cast to a (const char *). */
    pOp->p4.i = SQLITE_PTR_TO_INT(zP4);
    pOp->p4type = P4_INT32;
................................................................................
    db->errCode = rc;
  }else{
    sqlite3Error(db, rc, 0);
  }
  return rc;
}

#ifdef SQLITE_ENABLE_SQLLOG
/*
** If an SQLITE_CONFIG_SQLLOG hook is registered and the VM has been run, 
** invoke it.
*/
static void vdbeInvokeSqllog(Vdbe *v){
  if( sqlite3GlobalConfig.xSqllog && v->rc==SQLITE_OK && v->zSql && v->pc>=0 ){
    char *zExpanded = sqlite3VdbeExpandSql(v, v->zSql);
    assert( v->db->init.busy==0 );
    if( zExpanded ){
      sqlite3GlobalConfig.xSqllog(
          sqlite3GlobalConfig.pSqllogArg, v->db, zExpanded, 1
      );
      sqlite3DbFree(v->db, zExpanded);
    }
  }
}
#else
# define vdbeInvokeSqllog(x)
#endif

/*
** Clean up a VDBE after execution but do not delete the VDBE just yet.
** Write any error messages into *pzErrMsg.  Return the result code.
**
** After this routine is run, the VDBE should be ready to be executed
** again.
**
................................................................................

  /* If the VDBE has be run even partially, then transfer the error code
  ** and error message from the VDBE into the main database structure.  But
  ** if the VDBE has just been set to run but has not actually executed any
  ** instructions yet, leave the main database error information unchanged.
  */
  if( p->pc>=0 ){
    vdbeInvokeSqllog(p);
    sqlite3VdbeTransferError(p);
    sqlite3DbFree(db, p->zErrMsg);
    p->zErrMsg = 0;
    if( p->runOnlyOnce ) p->expired = 1;
  }else if( p->rc && p->expired ){
    /* The expired flag was set on the VDBE before the first call
    ** to sqlite3_step(). For consistency (since sqlite3_step() was
................................................................................
  for(i=p->nzVar-1; i>=0; i--) sqlite3DbFree(db, p->azVar[i]);
  vdbeFreeOpArray(db, p->aOp, p->nOp);
  sqlite3DbFree(db, p->aLabel);
  sqlite3DbFree(db, p->aColName);
  sqlite3DbFree(db, p->zSql);
  sqlite3DbFree(db, p->pFree);
#if defined(SQLITE_ENABLE_TREE_EXPLAIN)
  sqlite3_free(p->zExplain);
  sqlite3DbFree(db, p->pExplain);
#endif
}

/*
** Delete an entire VDBE.
*/
................................................................................
    }else{
      assert( sqlite3BtreeCursorIsValid(u.ao.pCrsr) );
      VVA_ONLY(rc =) sqlite3BtreeDataSize(u.ao.pCrsr, &u.ao.payloadSize);
      assert( rc==SQLITE_OK );   /* DataSize() cannot fail */
    }
  }else if( ALWAYS(u.ao.pC->pseudoTableReg>0) ){
    u.ao.pReg = &aMem[u.ao.pC->pseudoTableReg];
    if( u.ao.pC->multiPseudo ){
      sqlite3VdbeMemShallowCopy(u.ao.pDest, u.ao.pReg+u.ao.p2, MEM_Ephem);
      Deephemeralize(u.ao.pDest);
      goto op_column_out;
    }
    assert( u.ao.pReg->flags & MEM_Blob );
    assert( memIsValid(u.ao.pReg) );
    u.ao.payloadSize = u.ao.pReg->n;
    u.ao.zRec = u.ao.pReg->z;
    u.ao.pC->cacheStatus = (pOp->p5&OPFLAG_CLEARCACHE) ? CACHE_STALE : p->cacheCtr;
    assert( u.ao.payloadSize==0 || u.ao.zRec!=0 );
  }else{
................................................................................
    }
  }
  u.az.pCx->isOrdered = (pOp->p5!=BTREE_UNORDERED);
  u.az.pCx->isIndex = !u.az.pCx->isTable;
  break;
}

/* Opcode: SorterOpen P1 P2 * P4 *
**
** This opcode works like OP_OpenEphemeral except that it opens
** a transient index that is specifically designed to sort large
** tables using an external merge-sort algorithm.
*/
case OP_SorterOpen: {
#if 0  /* local variables moved into u.ba */
................................................................................
#else
  pOp->opcode = OP_OpenEphemeral;
  pc--;
#endif
  break;
}

/* Opcode: OpenPseudo P1 P2 P3 * P5
**
** Open a new cursor that points to a fake table that contains a single
** row of data.  The content of that one row in the content of memory
** register P2 when P5==0.  In other words, cursor P1 becomes an alias for the 
** MEM_Blob content contained in register P2.  When P5==1, then the
** row is represented by P3 consecutive registers beginning with P2.
**
** A pseudo-table created by this opcode is used to hold a single
** row output from the sorter so that the row can be decomposed into
** individual columns using the OP_Column opcode.  The OP_Column opcode
** is the only cursor opcode that works with a pseudo-table.
**
** P3 is the number of fields in the records that will be stored by
................................................................................
  assert( pOp->p1>=0 );
  u.bb.pCx = allocateCursor(p, pOp->p1, pOp->p3, -1, 0);
  if( u.bb.pCx==0 ) goto no_mem;
  u.bb.pCx->nullRow = 1;
  u.bb.pCx->pseudoTableReg = pOp->p2;
  u.bb.pCx->isTable = 1;
  u.bb.pCx->isIndex = 0;
  u.bb.pCx->multiPseudo = pOp->p5;
  break;
}

/* Opcode: Close P1 * * * *
**
** Close a cursor previously opened as P1.  If P1 is not
** currently open, this instruction is a no-op.
................................................................................
  sqlite3_vtab *pVtab;
  const sqlite3_module *pModule;
#endif /* local variables moved into u.bn */

  assert( pOp->p1>=0 && pOp->p1<p->nCursor );
  u.bn.pC = p->apCsr[pOp->p1];
  assert( u.bn.pC!=0 );
  assert( u.bn.pC->pseudoTableReg==0 || u.bn.pC->nullRow );
  if( u.bn.pC->nullRow ){
    pOut->flags = MEM_Null;
    break;
  }else if( u.bn.pC->deferredMoveto ){
    u.bn.v = u.bn.pC->movetoTarget;
#ifndef SQLITE_OMIT_VIRTUALTABLE
  }else if( u.bn.pC->pVtabCursor ){
................................................................................
  ** than p->nBuffer bytes remaining in the PMA, read all remaining data.  */
  iBuf = p->iReadOff % p->nBuffer;
  if( iBuf==0 ){
    int nRead;                    /* Bytes to read from disk */
    int rc;                       /* sqlite3OsRead() return code */

    /* Determine how many bytes of data to read. */
    if( (p->iEof - p->iReadOff) > (i64)p->nBuffer ){
      nRead = p->nBuffer;
    }else{
      nRead = (int)(p->iEof - p->iReadOff);
    }
    assert( nRead>0 );

    /* Read data from the file. Return early if an error occurs. */
    rc = sqlite3OsRead(p->pFile, p->aBuffer, nRead, p->iReadOff);
    assert( rc!=SQLITE_IOERR_SHORT_READ );
    if( rc!=SQLITE_OK ) return rc;
  }
................................................................................
*/
SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *p){
  if( p->pMethods!=&JournalFileMethods ){
    return SQLITE_OK;
  }
  return createFile((JournalFile *)p);
}

/*
** The file-handle passed as the only argument is guaranteed to be an open
** file. It may or may not be of class JournalFile. If the file is a
** JournalFile, and the underlying file on disk has not yet been opened,
** return 0. Otherwise, return 1.
*/
SQLITE_PRIVATE int sqlite3JournalExists(sqlite3_file *p){
  return (p->pMethods!=&JournalFileMethods || ((JournalFile *)p)->pReal!=0);
}

/* 
** Return the number of bytes required to store a JournalFile that uses vfs
** pVfs to create the underlying on-disk files.
*/
SQLITE_PRIVATE int sqlite3JournalSize(sqlite3_vfs *pVfs){
  return (pVfs->szOsFile+sizeof(JournalFile));
................................................................................
    pNewItem->zName = sqlite3DbStrDup(db, pOldItem->zName);
    pNewItem->zAlias = sqlite3DbStrDup(db, pOldItem->zAlias);
    pNewItem->jointype = pOldItem->jointype;
    pNewItem->iCursor = pOldItem->iCursor;
    pNewItem->addrFillSub = pOldItem->addrFillSub;
    pNewItem->regReturn = pOldItem->regReturn;
    pNewItem->isCorrelated = pOldItem->isCorrelated;
    pNewItem->viaCoroutine = pOldItem->viaCoroutine;
    pNewItem->zIndex = sqlite3DbStrDup(db, pOldItem->zIndex);
    pNewItem->notIndexed = pOldItem->notIndexed;
    pNewItem->pIndex = pOldItem->pIndex;
    pTab = pNewItem->pTab = pOldItem->pTab;
    if( pTab ){
      pTab->nRef++;
    }
................................................................................
        }
        /* Make pExpr point to the appropriate pAggInfo->aFunc[] entry
        */
        assert( !ExprHasAnyProperty(pExpr, EP_TokenOnly|EP_Reduced) );
        ExprSetIrreducible(pExpr);
        pExpr->iAgg = (i16)i;
        pExpr->pAggInfo = pAggInfo;

        return WRC_Prune;
      }else{
        return WRC_Continue;
      }
    }
  }
  return WRC_Continue;
}
static int analyzeAggregatesInSelect(Walker *pWalker, Select *pSelect){
  UNUSED_PARAMETER(pWalker);
  UNUSED_PARAMETER(pSelect);
  return WRC_Continue;
}

/*
** Analyze the pExpr expression looking for aggregate functions and
** for variables that need to be added to AggInfo object that pNC->pAggInfo
** points to.  Additional entries are made on the AggInfo object as
** necessary.
**
** This routine should only be called after the expression has been
** analyzed by sqlite3ResolveExprNames().
*/
SQLITE_PRIVATE void sqlite3ExprAnalyzeAggregates(NameContext *pNC, Expr *pExpr){
  Walker w;
  memset(&w, 0, sizeof(w));
................................................................................
  for(i=0, pItem=pList->a; i<pList->nSrc; i++, pItem++){
    if( pItem->zDatabase && sqlite3StrICmp(pItem->zDatabase, zDb) ){
      sqlite3ErrorMsg(pFix->pParse,
         "%s %T cannot reference objects in database %s",
         pFix->zType, pFix->pName, pItem->zDatabase);
      return 1;
    }
    sqlite3DbFree(pFix->pParse->db, pItem->zDatabase);
    pItem->zDatabase = 0;
    pItem->pSchema = pFix->pSchema;
#if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_TRIGGER)
    if( sqlite3FixSelect(pFix, pItem->pSelect) ) return 1;
    if( sqlite3FixExpr(pFix, pItem->pOn) ) return 1;
#endif
  }
................................................................................
      pFrom->a[0].pSelect = pDup;
      assert( pFrom->a[0].pOn==0 );
      assert( pFrom->a[0].pUsing==0 );
    }else{
      sqlite3SelectDelete(db, pDup);
    }
    pDup = sqlite3SelectNew(pParse, 0, pFrom, pWhere, 0, 0, 0, 0, 0, 0);
    if( pDup ) pDup->selFlags |= SF_Materialize;
  }
  sqlite3SelectDestInit(&dest, SRT_EphemTab, iCur);
  sqlite3Select(pParse, pDup, &dest);
  sqlite3SelectDelete(db, pDup);
}
#endif /* !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) */

................................................................................
      double rVal = sqlite3_value_double(argv[0]);
      if( rVal<0 ) rVal = -rVal;
      sqlite3_result_double(context, rVal);
      break;
    }
  }
}

/*
** Implementation of the instr() function.
**
** instr(haystack,needle) finds the first occurrence of needle
** in haystack and returns the number of previous characters plus 1,
** or 0 if needle does not occur within haystack.
**
** If both haystack and needle are BLOBs, then the result is one more than
** the number of bytes in haystack prior to the first occurrence of needle,
** or 0 if needle never occurs in haystack.
*/
static void instrFunc(
  sqlite3_context *context,
  int argc,
  sqlite3_value **argv
){
  const unsigned char *zHaystack;
  const unsigned char *zNeedle;
  int nHaystack;
  int nNeedle;
  int typeHaystack, typeNeedle;
  int N = 1;
  int isText;

  UNUSED_PARAMETER(argc);
  typeHaystack = sqlite3_value_type(argv[0]);
  typeNeedle = sqlite3_value_type(argv[1]);
  if( typeHaystack==SQLITE_NULL || typeNeedle==SQLITE_NULL ) return;
  nHaystack = sqlite3_value_bytes(argv[0]);
  nNeedle = sqlite3_value_bytes(argv[1]);
  if( typeHaystack==SQLITE_BLOB && typeNeedle==SQLITE_BLOB ){
    zHaystack = sqlite3_value_blob(argv[0]);
    zNeedle = sqlite3_value_blob(argv[1]);
    isText = 0;
  }else{
    zHaystack = sqlite3_value_text(argv[0]);
    zNeedle = sqlite3_value_text(argv[1]);
    isText = 1;
  }
  while( nNeedle<=nHaystack && memcmp(zHaystack, zNeedle, nNeedle)!=0 ){
    N++;
    do{
      nHaystack--;
      zHaystack++;
    }while( isText && (zHaystack[0]&0xc0)==0x80 );
  }
  if( nNeedle>nHaystack ) N = 0;
  sqlite3_result_int(context, N);
}

/*
** Implementation of the substr() function.
**
** substr(x,p1,p2)  returns p2 characters of x[] beginning with p1.
** p1 is 1-indexed.  So substr(x,1,1) returns the first character
** of x.  If x is text, then we actually count UTF-8 characters.
................................................................................
    FUNCTION(min,                0, 0, 1, 0                ),
    AGGREGATE(min,               1, 0, 1, minmaxStep,      minMaxFinalize ),
    FUNCTION(max,               -1, 1, 1, minmaxFunc       ),
    FUNCTION(max,                0, 1, 1, 0                ),
    AGGREGATE(max,               1, 1, 1, minmaxStep,      minMaxFinalize ),
    FUNCTION2(typeof,            1, 0, 0, typeofFunc,  SQLITE_FUNC_TYPEOF),
    FUNCTION2(length,            1, 0, 0, lengthFunc,  SQLITE_FUNC_LENGTH),
    FUNCTION(instr,              2, 0, 0, instrFunc        ),
    FUNCTION(substr,             2, 0, 0, substrFunc       ),
    FUNCTION(substr,             3, 0, 0, substrFunc       ),
    FUNCTION(abs,                1, 0, 0, absFunc          ),
#ifndef SQLITE_OMIT_FLOATING_POINT
    FUNCTION(round,              1, 0, 0, roundFunc        ),
    FUNCTION(round,              2, 0, 0, roundFunc        ),
#endif
................................................................................
  Parse *p,       /* Generate code into this VDBE */
  int iCur,       /* The cursor number of the table */
  int iDb,        /* The database index in sqlite3.aDb[] */
  Table *pTab,    /* The table to be opened */
  int opcode      /* OP_OpenRead or OP_OpenWrite */
){
  Vdbe *v;
  assert( !IsVirtual(pTab) );
  v = sqlite3GetVdbe(p);
  assert( opcode==OP_OpenWrite || opcode==OP_OpenRead );
  sqlite3TableLock(p, iDb, pTab->tnum, (opcode==OP_OpenWrite)?1:0, pTab->zName);
  sqlite3VdbeAddOp3(v, opcode, iCur, pTab->tnum, iDb);
  sqlite3VdbeChangeP4(v, -1, SQLITE_INT_TO_PTR(pTab->nCol), P4_INT32);
  VdbeComment((v, "%s", pTab->zName));
}
................................................................................
  for(i=0; !p->pPrior && i<pTabList->nSrc; i++){
    struct SrcList_item *pItem = &pTabList->a[i];
    SelectDest dest;
    Select *pSub = pItem->pSelect;
    int isAggSub;

    if( pSub==0 ) continue;

    /* Sometimes the code for a subquery will be generated more than
    ** once, if the subquery is part of the WHERE clause in a LEFT JOIN,
    ** for example.  In that case, do not regenerate the code to manifest
    ** a view or the co-routine to implement a view.  The first instance
    ** is sufficient, though the subroutine to manifest the view does need
    ** to be invoked again. */
    if( pItem->addrFillSub ){
      if( pItem->viaCoroutine==0 ){
        sqlite3VdbeAddOp2(v, OP_Gosub, pItem->regReturn, pItem->addrFillSub);
      }
      continue;
    }

    /* Increment Parse.nHeight by the height of the largest expression
    ** tree refered to by this, the parent select. The child select
    ** may contain expression trees of at most
    ** (SQLITE_MAX_EXPR_DEPTH-Parse.nHeight) height. This is a bit
................................................................................
    if( flattenSubquery(pParse, p, i, isAgg, isAggSub) ){
      /* This subquery can be absorbed into its parent. */
      if( isAggSub ){
        isAgg = 1;
        p->selFlags |= SF_Aggregate;
      }
      i = -1;
    }else if( pTabList->nSrc==1 && (p->selFlags & SF_Materialize)==0
      && OptimizationEnabled(db, SQLITE_SubqCoroutine)
    ){
      /* Implement a co-routine that will return a single row of the result
      ** set on each invocation.
      */
      int addrTop;
      int addrEof;
      pItem->regReturn = ++pParse->nMem;
      addrEof = ++pParse->nMem;
      sqlite3VdbeAddOp0(v, OP_Goto);
      addrTop = sqlite3VdbeAddOp1(v, OP_OpenPseudo, pItem->iCursor);
      sqlite3VdbeChangeP5(v, 1);
      VdbeComment((v, "coroutine for %s", pItem->pTab->zName));
      pItem->addrFillSub = addrTop;
      sqlite3VdbeAddOp2(v, OP_Integer, 0, addrEof);
      sqlite3VdbeChangeP5(v, 1);
      sqlite3SelectDestInit(&dest, SRT_Coroutine, pItem->regReturn);
      explainSetInteger(pItem->iSelectId, (u8)pParse->iNextSelectId);
      sqlite3Select(pParse, pSub, &dest);
      pItem->pTab->nRowEst = (unsigned)pSub->nSelectRow;
      pItem->viaCoroutine = 1;
      sqlite3VdbeChangeP2(v, addrTop, dest.iSdst);
      sqlite3VdbeChangeP3(v, addrTop, dest.nSdst);
      sqlite3VdbeAddOp2(v, OP_Integer, 1, addrEof);
      sqlite3VdbeAddOp1(v, OP_Yield, pItem->regReturn);
      VdbeComment((v, "end %s", pItem->pTab->zName));
      sqlite3VdbeJumpHere(v, addrTop-1);
      sqlite3ClearTempRegCache(pParse);
    }else{
      /* Generate a subroutine that will fill an ephemeral table with
      ** the content of this subquery.  pItem->addrFillSub will point
      ** to the address of the generated subroutine.  pItem->regReturn
      ** is a register allocated to hold the subroutine return address
      */
      int topAddr;
................................................................................
    /* There is no point in building an automatic index for a single scan */
    return;
  }
  if( (pParse->db->flags & SQLITE_AutoIndex)==0 ){
    /* Automatic indices are disabled at run-time */
    return;
  }
  if( (p->cost.plan.wsFlags & WHERE_NOT_FULLSCAN)!=0
   && (p->cost.plan.wsFlags & WHERE_COVER_SCAN)==0
  ){
    /* We already have some kind of index in use for this query. */
    return;
  }
  if( pSrc->viaCoroutine ){
    /* Cannot index a co-routine */
    return;
  }
  if( pSrc->notIndexed ){
    /* The NOT INDEXED clause appears in the SQL. */
    return;
  }
  if( pSrc->isCorrelated ){
    /* The source is a correlated sub-query. No point in indexing it. */
................................................................................
**
** If there was an INDEXED BY clause (pSrc->pIndex) attached to the table in
** the SQL statement, then this function only considers plans using the 
** named index. If no such plan is found, then the returned cost is
** SQLITE_BIG_DBL. If a plan is found that uses the named index, 
** then the cost is calculated in the usual way.
**
** If a NOT INDEXED clause was attached to the table 
** in the SELECT statement, then no indexes are considered. However, the 
** selected plan may still take advantage of the built-in rowid primary key
** index.
*/
static void bestBtreeIndex(WhereBestIdx *p){
  Parse *pParse = p->pParse;  /* The parsing context */
  WhereClause *pWC = p->pWC;  /* The WHERE clause */
................................................................................
  ** row of the left table of the join.
  */
  if( pLevel->iFrom>0 && (pTabItem[0].jointype & JT_LEFT)!=0 ){
    pLevel->iLeftJoin = ++pParse->nMem;
    sqlite3VdbeAddOp2(v, OP_Integer, 0, pLevel->iLeftJoin);
    VdbeComment((v, "init LEFT JOIN no-match flag"));
  }

  /* Special case of a FROM clause subquery implemented as a co-routine */
  if( pTabItem->viaCoroutine ){
    int regYield = pTabItem->regReturn;
    sqlite3VdbeAddOp2(v, OP_Integer, pTabItem->addrFillSub-1, regYield);
    pLevel->p2 =  sqlite3VdbeAddOp1(v, OP_Yield, regYield);
    VdbeComment((v, "next row of co-routine %s", pTabItem->pTab->zName));
    sqlite3VdbeAddOp2(v, OP_If, regYield+1, addrBrk);
    pLevel->op = OP_Goto;
  }else

#ifndef SQLITE_OMIT_VIRTUALTABLE
  if(  (pLevel->plan.wsFlags & WHERE_VIRTUALTABLE)!=0 ){
    /* Case 0:  The table is a virtual-table.  Use the VFilter and VNext
    **          to access the data.
    */
    int iReg;   /* P3 Value for OP_VFilter */
................................................................................
        assert( sWBI.pSrc->pIndex==0 
                  || (sWBI.cost.plan.wsFlags & WHERE_NOT_FULLSCAN)==0
                  || sWBI.cost.plan.u.pIdx==sWBI.pSrc->pIndex );

        if( isOptimal && (sWBI.cost.plan.wsFlags & WHERE_NOT_FULLSCAN)==0 ){
          notIndexed |= m;
        }
        if( isOptimal ){
          pWInfo->a[j].rOptCost = sWBI.cost.rCost;
        }else if( iFrom<nTabList-1 ){
          /* If two or more tables have nearly the same outer loop cost,
          ** very different inner loop (optimal) cost, we want to choose
          ** for the outer loop that table which benefits the least from
          ** being in the inner loop.  The following code scales the 
          ** outer loop cost estimate to accomplish that. */
          WHERETRACE(("   scaling cost from %.1f to %.1f\n",
                      sWBI.cost.rCost,
                      sWBI.cost.rCost/pWInfo->a[j].rOptCost));
          sWBI.cost.rCost /= pWInfo->a[j].rOptCost;
        }

        /* Conditions under which this table becomes the best so far:
        **
        **   (1) The table must not depend on other tables that have not
        **       yet run.  (In other words, it must not depend on tables
        **       in inner loops.)
        **
        **   (2) (This rule was removed on 2012-11-09.  The scaling of the
        **       cost using the optimal scan cost made this rule obsolete.)
        **
        **   (3) All tables have an INDEXED BY clause or this table lacks an
        **       INDEXED BY clause or this table uses the specific
        **       index specified by its INDEXED BY clause.  This rule ensures
        **       that a best-so-far is always selected even if an impossible
        **       combination of INDEXED BY clauses are given.  The error
        **       will be detected and relayed back to the application later.
................................................................................
        **       The NEVER() comes about because rule (2) above prevents
        **       An indexable full-table-scan from reaching rule (3).
        **
        **   (4) The plan cost must be lower than prior plans, where "cost"
        **       is defined by the compareCost() function above. 
        */
        if( (sWBI.cost.used&sWBI.notValid)==0                    /* (1) */



            && (nUnconstrained==0 || sWBI.pSrc->pIndex==0        /* (3) */
                || NEVER((sWBI.cost.plan.wsFlags & WHERE_NOT_FULLSCAN)!=0))
            && (bestJ<0 || compareCost(&sWBI.cost, &bestPlan))   /* (4) */
        ){
          WHERETRACE(("   === table %d (%s) is best so far\n"
                      "       cost=%.1f, nRow=%.1f, nOBSat=%d, wsFlags=%08x\n",
                      j, sWBI.pSrc->pTab->zName,
................................................................................
      /* Do nothing */
    }else
#ifndef SQLITE_OMIT_VIRTUALTABLE
    if( (pLevel->plan.wsFlags & WHERE_VIRTUALTABLE)!=0 ){
      const char *pVTab = (const char *)sqlite3GetVTable(db, pTab);
      int iCur = pTabItem->iCursor;
      sqlite3VdbeAddOp4(v, OP_VOpen, iCur, 0, 0, pVTab, P4_VTAB);
    }else if( IsVirtual(pTab) ){
      /* noop */
    }else
#endif
    if( (pLevel->plan.wsFlags & WHERE_IDX_ONLY)==0
         && (wctrlFlags & WHERE_OMIT_OPEN_CLOSE)==0 ){
      int op = pWInfo->okOnePass ? OP_OpenWrite : OP_OpenRead;
      sqlite3OpenTable(pParse, pTabItem->iCursor, iDb, pTab, op);
      testcase( pTab->nCol==BMS-1 );
................................................................................

  /* If SQLite is already completely initialized, then this call
  ** to sqlite3_initialize() should be a no-op.  But the initialization
  ** must be complete.  So isInit must not be set until the very end
  ** of this routine.
  */
  if( sqlite3GlobalConfig.isInit ) return SQLITE_OK;

#ifdef SQLITE_ENABLE_SQLLOG
  {
    extern void sqlite3_init_sqllog(void);
    sqlite3_init_sqllog();
  }
#endif

  /* Make sure the mutex subsystem is initialized.  If unable to 
  ** initialize the mutex subsystem, return early with the error.
  ** If the system is so sick that we are unable to allocate a mutex,
  ** there is not much SQLite is going to be able to do.
  **
  ** The mutex subsystem must take care of serializing its own
................................................................................
      break;
    }

    case SQLITE_CONFIG_COVERING_INDEX_SCAN: {
      sqlite3GlobalConfig.bUseCis = va_arg(ap, int);
      break;
    }

#ifdef SQLITE_ENABLE_SQLLOG
    case SQLITE_CONFIG_SQLLOG: {
      typedef void(*SQLLOGFUNC_t)(void*, sqlite3*, const char*, int);
      sqlite3GlobalConfig.xSqllog = va_arg(ap, SQLLOGFUNC_t);
      sqlite3GlobalConfig.pSqllogArg = va_arg(ap, void *);
      break;
    }
#endif

    default: {
      rc = SQLITE_ERROR;
      break;
    }
  }
  va_end(ap);
................................................................................
  */
  if( !forceZombie && connectionIsBusy(db) ){
    sqlite3Error(db, SQLITE_BUSY, "unable to close due to unfinalized "
       "statements or unfinished backups");
    sqlite3_mutex_leave(db->mutex);
    return SQLITE_BUSY;
  }

#ifdef SQLITE_ENABLE_SQLLOG
  if( sqlite3GlobalConfig.xSqllog ){
    /* Closing the handle. Fourth parameter is passed the value 2. */
    sqlite3GlobalConfig.xSqllog(sqlite3GlobalConfig.pSqllogArg, db, 0, 2);
  }
#endif

  /* Convert the connection into a zombie and then close it.
  */
  db->magic = SQLITE_MAGIC_ZOMBIE;
  sqlite3LeaveMutexAndCloseZombie(db);
  return SQLITE_OK;
}
................................................................................
  if( rc==SQLITE_NOMEM ){
    sqlite3_close(db);
    db = 0;
  }else if( rc!=SQLITE_OK ){
    db->magic = SQLITE_MAGIC_SICK;
  }
  *ppDb = db;
#ifdef SQLITE_ENABLE_SQLLOG
  if( sqlite3GlobalConfig.xSqllog ){
    /* Opening a db handle. Fourth parameter is passed 0. */
    void *pArg = sqlite3GlobalConfig.pSqllogArg;
    sqlite3GlobalConfig.xSqllog(pArg, db, zFilename, 0);
  }
#endif
  return sqlite3ApiExit(0, rc);
}

/*
** Open a new database handle.
*/
SQLITE_API int sqlite3_open(
................................................................................
    ** operation N should be 0.  The idea is that a test program (like the
    ** SQL Logic Test or SLT test module) can run the same SQL multiple times
    ** with various optimizations disabled to verify that the same answer
    ** is obtained in every case.
    */
    case SQLITE_TESTCTRL_OPTIMIZATIONS: {
      sqlite3 *db = va_arg(ap, sqlite3*);
      db->dbOptFlags = (u16)(va_arg(ap, int) & 0xffff);
      break;
    }

#ifdef SQLITE_N_KEYWORD
    /* sqlite3_test_control(SQLITE_TESTCTRL_ISKEYWORD, const char *zWord)
    **
    ** If zWord is a keyword recognized by the parser, then return the
................................................................................
** If successful, SQLITE_OK is returned. Otherwise, an SQLite error code.
*/
static int fts3PendingTermsAdd(
  Fts3Table *p,                   /* Table into which text will be inserted */
  int iLangid,                    /* Language id to use */
  const char *zText,              /* Text of document to be inserted */
  int iCol,                       /* Column into which text is being inserted */
  u32 *pnWord                     /* IN/OUT: Incr. by number tokens inserted */
){
  int rc;
  int iStart = 0;
  int iEnd = 0;
  int iPos = 0;
  int nWord = 0;

................................................................................
      rc = fts3PendingTermsAddOne(
          p, iCol, iPos, &pIndex->hPending, zToken, pIndex->nPrefix
      );
    }
  }

  pModule->xClose(pCsr);
  *pnWord += nWord;
  return (rc==SQLITE_DONE ? SQLITE_OK : rc);
}

/* 
** Calling this function indicates that subsequent calls to 
** fts3PendingTermsAdd() are to add term/position-list pairs for the
** contents of the document with docid iDocid.
................................................................................
** (an integer) of a row about to be deleted. Remove all terms from the
** full-text index.
*/
static void fts3DeleteTerms( 
  int *pRC,               /* Result code */
  Fts3Table *p,           /* The FTS table to delete from */
  sqlite3_value *pRowid,  /* The docid to be deleted */
  u32 *aSz,               /* Sizes of deleted document written here */
  int *pbFound            /* OUT: Set to true if row really does exist */
){
  int rc;
  sqlite3_stmt *pSelect;

  assert( *pbFound==0 );
  if( *pRC ) return;
  rc = fts3SqlStmt(p, SQL_SELECT_CONTENT_BY_ROWID, &pSelect, &pRowid);
  if( rc==SQLITE_OK ){
    if( SQLITE_ROW==sqlite3_step(pSelect) ){
      int i;
      int iLangid = langidFromSelect(p, pSelect);
      rc = fts3PendingTermsDocid(p, iLangid, sqlite3_column_int64(pSelect, 0));
................................................................................
        aSz[p->nColumn] += sqlite3_column_bytes(pSelect, i);
      }
      if( rc!=SQLITE_OK ){
        sqlite3_reset(pSelect);
        *pRC = rc;
        return;
      }
      *pbFound = 1;
    }
    rc = sqlite3_reset(pSelect);
  }else{
    sqlite3_reset(pSelect);
  }
  *pRC = rc;
}
................................................................................
      }
    }

    while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pStmt) ){
      int iCol;
      int iLangid = langidFromSelect(p, pStmt);
      rc = fts3PendingTermsDocid(p, iLangid, sqlite3_column_int64(pStmt, 0));
      memset(aSz, 0, sizeof(aSz[0]) * (p->nColumn+1));
      for(iCol=0; rc==SQLITE_OK && iCol<p->nColumn; iCol++){
        const char *z = (const char *) sqlite3_column_text(pStmt, iCol+1);
        rc = fts3PendingTermsAdd(p, iLangid, z, iCol, &aSz[iCol]);
        aSz[p->nColumn] += sqlite3_column_bytes(pStmt, iCol+1);
      }
      if( p->bHasDocsize ){
        fts3InsertDocsize(&rc, p, aSz);
................................................................................
** SQLite value pRowid contains the rowid of a row that may or may not be
** present in the FTS3 table. If it is, delete it and adjust the contents
** of subsiduary data structures accordingly.
*/
static int fts3DeleteByRowid(
  Fts3Table *p, 
  sqlite3_value *pRowid, 
  int *pnChng,                    /* IN/OUT: Decrement if row is deleted */
  u32 *aSzDel
){
  int rc = SQLITE_OK;             /* Return code */
  int bFound = 0;                 /* True if *pRowid really is in the table */

  fts3DeleteTerms(&rc, p, pRowid, aSzDel, &bFound);
  if( bFound && rc==SQLITE_OK ){
    int isEmpty = 0;              /* Deleting *pRowid leaves the table empty */
    rc = fts3IsEmpty(p, pRowid, &isEmpty);
    if( rc==SQLITE_OK ){
      if( isEmpty ){
        /* Deleting this row means the whole table is empty. In this case
        ** delete the contents of all three tables and throw away any
        ** data in the pendingTerms hash table.  */
        rc = fts3DeleteAll(p, 1);

        *pnChng = 0;
        memset(aSzDel, 0, sizeof(u32) * (p->nColumn+1) * 2);
      }else{

        *pnChng = *pnChng - 1;
        if( p->zContentTbl==0 ){
          fts3SqlExec(&rc, p, SQL_DELETE_CONTENT, &pRowid);



        }
        if( p->bHasDocsize ){
          fts3SqlExec(&rc, p, SQL_DELETE_DOCSIZE, &pRowid);
        }
      }
    }
  }

  return rc;
}

................................................................................
  sqlite3_value **apVal,          /* Array of arguments */
  sqlite_int64 *pRowid            /* OUT: The affected (or effected) rowid */
){
  Fts3Table *p = (Fts3Table *)pVtab;
  int rc = SQLITE_OK;             /* Return Code */
  int isRemove = 0;               /* True for an UPDATE or DELETE */
  u32 *aSzIns = 0;                /* Sizes of inserted documents */
  u32 *aSzDel = 0;                /* Sizes of deleted documents */
  int nChng = 0;                  /* Net change in number of documents */
  int bInsertDone = 0;

  assert( p->pSegments==0 );
  assert( 
      nArg==1                     /* DELETE operations */
   || nArg==(2 + p->nColumn + 3)  /* INSERT or UPDATE operations */
................................................................................

  if( nArg>1 && sqlite3_value_int(apVal[2 + p->nColumn + 2])<0 ){
    rc = SQLITE_CONSTRAINT;
    goto update_out;
  }

  /* Allocate space to hold the change in document sizes */
  aSzDel = sqlite3_malloc( sizeof(aSzDel[0])*(p->nColumn+1)*2 );
  if( aSzDel==0 ){
    rc = SQLITE_NOMEM;
    goto update_out;
  }
  aSzIns = &aSzDel[p->nColumn+1];
  memset(aSzDel, 0, sizeof(aSzDel[0])*(p->nColumn+1)*2);

  /* If this is an INSERT operation, or an UPDATE that modifies the rowid
  ** value, then this operation requires constraint handling.
  **
  ** If the on-conflict mode is REPLACE, this means that the existing row
  ** should be deleted from the database before inserting the new row. Or,
  ** if the on-conflict mode is other than REPLACE, then this method must
................................................................................
  }

  if( p->bFts4 ){
    fts3UpdateDocTotals(&rc, p, aSzIns, aSzDel, nChng);
  }

 update_out:
  sqlite3_free(aSzDel);
  sqlite3Fts3SegmentsClose(p);
  return rc;
}

/* 
** Flush any data in the pending-terms hash table to disk. If successful,
** merge all segments in the database (including the new segment, if 

**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.7.15"
#define SQLITE_VERSION_NUMBER 3007015
#define SQLITE_SOURCE_ID      "2012-10-26 00:55:07 6d42d806adb833572a324d4141ab3b2c315617b2"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version, sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
................................................................................
#define SQLITE_IOERR_CLOSE             (SQLITE_IOERR | (16<<8))
#define SQLITE_IOERR_DIR_CLOSE         (SQLITE_IOERR | (17<<8))
#define SQLITE_IOERR_SHMOPEN           (SQLITE_IOERR | (18<<8))
#define SQLITE_IOERR_SHMSIZE           (SQLITE_IOERR | (19<<8))
#define SQLITE_IOERR_SHMLOCK           (SQLITE_IOERR | (20<<8))
#define SQLITE_IOERR_SHMMAP            (SQLITE_IOERR | (21<<8))
#define SQLITE_IOERR_SEEK              (SQLITE_IOERR | (22<<8))

#define SQLITE_LOCKED_SHAREDCACHE      (SQLITE_LOCKED |  (1<<8))
#define SQLITE_BUSY_RECOVERY           (SQLITE_BUSY   |  (1<<8))
#define SQLITE_CANTOPEN_NOTEMPDIR      (SQLITE_CANTOPEN | (1<<8))
#define SQLITE_CANTOPEN_ISDIR          (SQLITE_CANTOPEN | (2<<8))
#define SQLITE_CANTOPEN_FULLPATH       (SQLITE_CANTOPEN | (3<<8))
#define SQLITE_CORRUPT_VTAB            (SQLITE_CORRUPT | (1<<8))
#define SQLITE_READONLY_RECOVERY       (SQLITE_READONLY | (1<<8))
................................................................................
** without change even with newer versions of SQLite.
**
** [[SQLITE_CONFIG_PCACHE]] [[SQLITE_CONFIG_GETPCACHE]]
** <dt>SQLITE_CONFIG_PCACHE and SQLITE_CONFIG_GETPCACHE
** <dd> These options are obsolete and should not be used by new code.
** They are retained for backwards compatibility but are now no-ops.
** </dl>
















*/
#define SQLITE_CONFIG_SINGLETHREAD  1  /* nil */
#define SQLITE_CONFIG_MULTITHREAD   2  /* nil */
#define SQLITE_CONFIG_SERIALIZED    3  /* nil */
#define SQLITE_CONFIG_MALLOC        4  /* sqlite3_mem_methods* */
#define SQLITE_CONFIG_GETMALLOC     5  /* sqlite3_mem_methods* */
#define SQLITE_CONFIG_SCRATCH       6  /* void*, int sz, int N */
................................................................................
#define SQLITE_CONFIG_PCACHE       14  /* no-op */
#define SQLITE_CONFIG_GETPCACHE    15  /* no-op */
#define SQLITE_CONFIG_LOG          16  /* xFunc, void* */
#define SQLITE_CONFIG_URI          17  /* int */
#define SQLITE_CONFIG_PCACHE2      18  /* sqlite3_pcache_methods2* */
#define SQLITE_CONFIG_GETPCACHE2   19  /* sqlite3_pcache_methods2* */
#define SQLITE_CONFIG_COVERING_INDEX_SCAN 20  /* int */


/*
** CAPI3REF: Database Connection Configuration Options
**
** These constants are the available integer configuration options that
** can be passed as the second argument to the [sqlite3_db_config()] interface.
**

**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.7.15"
#define SQLITE_VERSION_NUMBER 3007015
#define SQLITE_SOURCE_ID      "2012-12-06 04:33:13 d507648d820cfea70e17f3d21c35c932a2d20367"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version, sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
................................................................................
#define SQLITE_IOERR_CLOSE             (SQLITE_IOERR | (16<<8))
#define SQLITE_IOERR_DIR_CLOSE         (SQLITE_IOERR | (17<<8))
#define SQLITE_IOERR_SHMOPEN           (SQLITE_IOERR | (18<<8))
#define SQLITE_IOERR_SHMSIZE           (SQLITE_IOERR | (19<<8))
#define SQLITE_IOERR_SHMLOCK           (SQLITE_IOERR | (20<<8))
#define SQLITE_IOERR_SHMMAP            (SQLITE_IOERR | (21<<8))
#define SQLITE_IOERR_SEEK              (SQLITE_IOERR | (22<<8))
#define SQLITE_IOERR_DELETE_NOENT      (SQLITE_IOERR | (23<<8))
#define SQLITE_LOCKED_SHAREDCACHE      (SQLITE_LOCKED |  (1<<8))
#define SQLITE_BUSY_RECOVERY           (SQLITE_BUSY   |  (1<<8))
#define SQLITE_CANTOPEN_NOTEMPDIR      (SQLITE_CANTOPEN | (1<<8))
#define SQLITE_CANTOPEN_ISDIR          (SQLITE_CANTOPEN | (2<<8))
#define SQLITE_CANTOPEN_FULLPATH       (SQLITE_CANTOPEN | (3<<8))
#define SQLITE_CORRUPT_VTAB            (SQLITE_CORRUPT | (1<<8))
#define SQLITE_READONLY_RECOVERY       (SQLITE_READONLY | (1<<8))
................................................................................
** without change even with newer versions of SQLite.
**
** [[SQLITE_CONFIG_PCACHE]] [[SQLITE_CONFIG_GETPCACHE]]
** <dt>SQLITE_CONFIG_PCACHE and SQLITE_CONFIG_GETPCACHE
** <dd> These options are obsolete and should not be used by new code.
** They are retained for backwards compatibility but are now no-ops.
** </dl>
**
** [[SQLITE_CONFIG_SQLLOG]]
** <dt>SQLITE_CONFIG_SQLLOG
** <dd>This option is only available if sqlite is compiled with the
** SQLITE_ENABLE_SQLLOG pre-processor macro defined. The first argument should
** be a pointer to a function of type void(*)(void*,sqlite3*,const char*, int).
** The second should be of type (void*). The callback is invoked by the library
** in three separate circumstances, identified by the value passed as the
** fourth parameter. If the fourth parameter is 0, then the database connection
** passed as the second argument has just been opened. The third argument
** points to a buffer containing the name of the main database file. If the
** fourth parameter is 1, then the SQL statement that the third parameter
** points to has just been executed. Or, if the fourth parameter is 2, then
** the connection being passed as the second parameter is being closed. The
** third parameter is passed NULL In this case.
** </dl>
*/
#define SQLITE_CONFIG_SINGLETHREAD  1  /* nil */
#define SQLITE_CONFIG_MULTITHREAD   2  /* nil */
#define SQLITE_CONFIG_SERIALIZED    3  /* nil */
#define SQLITE_CONFIG_MALLOC        4  /* sqlite3_mem_methods* */
#define SQLITE_CONFIG_GETMALLOC     5  /* sqlite3_mem_methods* */
#define SQLITE_CONFIG_SCRATCH       6  /* void*, int sz, int N */
................................................................................
#define SQLITE_CONFIG_PCACHE       14  /* no-op */
#define SQLITE_CONFIG_GETPCACHE    15  /* no-op */
#define SQLITE_CONFIG_LOG          16  /* xFunc, void* */
#define SQLITE_CONFIG_URI          17  /* int */
#define SQLITE_CONFIG_PCACHE2      18  /* sqlite3_pcache_methods2* */
#define SQLITE_CONFIG_GETPCACHE2   19  /* sqlite3_pcache_methods2* */
#define SQLITE_CONFIG_COVERING_INDEX_SCAN 20  /* int */
#define SQLITE_CONFIG_SQLLOG       21  /* xSqllog, void* */

/*
** CAPI3REF: Database Connection Configuration Options
**
** These constants are the available integer configuration options that
** can be passed as the second argument to the [sqlite3_db_config()] interface.
**

      }

    private static int OldTests()
    {
      using (northwindEFEntities db = new northwindEFEntities())
      {
        {
          string entitySQL = "SELECT VALUE o FROM Orders AS o WHERE SQLite.DatePart('yyyy', o.OrderDate) = 1997;";
          ObjectQuery<Orders> query = db.CreateQuery<Orders>(entitySQL);

          foreach (Orders o in query)
          {
            Console.WriteLine(o.ShipPostalCode);
          }
        }
................................................................................
          Console.WriteLine(c.CompanyName);
        }

        {
          DateTime dt = new DateTime(1997, 1, 1);
          var query = from order in db.Orders
                      where order.OrderDate < dt

                      select order;

          foreach (Orders o in query)
          {
            Console.WriteLine(o.OrderDate.ToString());
          }
        }
................................................................................

          db.DeleteObject(cust);
          db.SaveChanges();
        }

        {
          var query = db.Customers.Where(cust => cust.Country == "Denmark")
                          .SelectMany(cust => cust.Orders.Where(o => o.Freight > 5));


          foreach (Orders c in query)
          {
            Console.WriteLine(c.Freight);
          }
        }

        {
          var query = from c in db.Customers
                      where c.Orders.Any(o => o.OrderDate.HasValue == true && o.OrderDate.Value.Year == 1997)

                      select c;

          foreach (Customers c in query)
          {
            Console.WriteLine(c.CompanyName);
          }
        }

        {
          string entitySQL = "SELECT VALUE o FROM Orders AS o WHERE o.Customers.Country <> 'UK' AND o.Customers.Country <> 'Mexico' AND Year(o.OrderDate) = 1997;";
          ObjectQuery<Orders> query = db.CreateQuery<Orders>(entitySQL);

          foreach (Orders o in query)
          {
            Console.WriteLine(o.ShipPostalCode);
          }
        }

        {
          string entitySQL = "SELECT VALUE o FROM Orders AS o WHERE NewGuid() <> NewGuid();";
          ObjectQuery<Orders> query = db.CreateQuery<Orders>(entitySQL);

          foreach (Orders o in query)
          {
            Console.WriteLine(o.ShipPostalCode);
          }
        }

        // This query requires SQLite 3.6.2 to function correctly
        {
          var query = from p in db.Products
                      where p.OrderDetails.Count(od => od.Orders.Customers.Country == p.Suppliers.Country) > 2

                      select p;

          foreach (Products p in query)
          {
            Console.WriteLine(p.ProductName);
          }
        }

      }

    private static int OldTests()
    {
      using (northwindEFEntities db = new northwindEFEntities())
      {
        {
          string entitySQL = "SELECT VALUE o FROM Orders AS o WHERE SQLite.DatePart('yyyy', o.OrderDate) = 1997 ORDER BY o.OrderID;";
          ObjectQuery<Orders> query = db.CreateQuery<Orders>(entitySQL);

          foreach (Orders o in query)
          {
            Console.WriteLine(o.ShipPostalCode);
          }
        }
................................................................................
          Console.WriteLine(c.CompanyName);
        }

        {
          DateTime dt = new DateTime(1997, 1, 1);
          var query = from order in db.Orders
                      where order.OrderDate < dt
                      orderby order.OrderID
                      select order;

          foreach (Orders o in query)
          {
            Console.WriteLine(o.OrderDate.ToString());
          }
        }
................................................................................

          db.DeleteObject(cust);
          db.SaveChanges();
        }

        {
          var query = db.Customers.Where(cust => cust.Country == "Denmark")
                          .SelectMany(cust => cust.Orders.Where(o => o.Freight > 5))
                          .OrderBy(o => o.Customers.CustomerID);

          foreach (Orders c in query)
          {
            Console.WriteLine(c.Freight);
          }
        }

        {
          var query = from c in db.Customers
                      where c.Orders.Any(o => o.OrderDate.HasValue == true && o.OrderDate.Value.Year == 1997)
                      orderby c.CustomerID
                      select c;

          foreach (Customers c in query)
          {
            Console.WriteLine(c.CompanyName);
          }
        }

        {
          string entitySQL = "SELECT VALUE o FROM Orders AS o WHERE o.Customers.Country <> 'UK' AND o.Customers.Country <> 'Mexico' AND Year(o.OrderDate) = 1997 ORDER BY o.OrderID;";
          ObjectQuery<Orders> query = db.CreateQuery<Orders>(entitySQL);

          foreach (Orders o in query)
          {
            Console.WriteLine(o.ShipPostalCode);
          }
        }

        {
          string entitySQL = "SELECT VALUE o FROM Orders AS o WHERE NewGuid() <> NewGuid() ORDER BY o.OrderID;";
          ObjectQuery<Orders> query = db.CreateQuery<Orders>(entitySQL);

          foreach (Orders o in query)
          {
            Console.WriteLine(o.ShipPostalCode);
          }
        }

        // This query requires SQLite 3.6.2 to function correctly
        {
          var query = from p in db.Products
                      where p.OrderDetails.Count(od => od.Orders.Customers.Country == p.Suppliers.Country) > 2
                      orderby p.ProductID
                      select p;

          foreach (Products p in query)
          {
            Console.WriteLine(p.ProductName);
          }
        }