System.Data.SQLite

      #         test suite.
      #
      # debug procedureflags test +ScriptLocation
      # debug procedureflags runTest +ScriptLocation

      #
      # HACK: Compatibility shim(s) for use with various tests in the Tcl
      #       test suite.  Make sure these commands do not already exist
      #       prior to attempt to adding them.
      #
      if {[llength [info commands testConstraint]] == 0} then {
        interp alias {} testConstraint {} haveOrAddConstraint
      }

      if {[llength [info commands ::tcltest::testConstraint]] == 0} then {
        interp alias {} ::tcltest::testConstraint {} haveOrAddConstraint
      }

      #
      # NOTE: This is needed by most tests in the Tcl test suite.  Make
      #       sure this command does not already exist prior to adding it.
      #
      if {[llength [info commands ::tcltest::cleanupTests]] == 0} then {
        proc ::tcltest::cleanupTests { args } {}
      }

      #
      # NOTE: Fake having the tcltest package.
      #
      package provide tcltest 2.2.10; # Tcl 8.4
    } else {
      #

      addConstraint [appendArgs command. $name]

      tputs $channel yes\n
    } else {
      tputs $channel no\n
    }
  }

  proc checkForTestConfiguration { channel } {
    tputs $channel [appendArgs "---- checking for test configuration... "]

    if {[info exists ::test_configuration] && \
        [string length $::test_configuration] > 0} then {
      addConstraint [appendArgs configuration. $::test_configuration]

      tputs $channel [appendArgs $::test_configuration \n]
    } else {
      tputs $channel [appendArgs unknown \n]
    }
  }

  proc checkForFile { channel name {constraint ""} } {
    tputs $channel [appendArgs "---- checking for file \"" $name \
        "\"... "]

    if {[file exists $name]} then {
      #

    #
    exportAndImportPackageCommands [namespace current] [list checkForPlatform \
        checkForEagle checkForGaruda checkForShell checkForDebug checkForTk \
        checkForVersion checkForCommand checkForFile checkForNativeCode \
        checkForTip127 checkForTip194 checkForTip241 checkForTip285 \
        checkForPerformance checkForTiming checkForInteractive checkForSymbols \
        checkForLogFile checkForNetwork checkForCompileOption \
        checkForWindowsCommandProcessor checkForUserInteraction \
        checkForTestConfiguration] false false

    ###########################################################################
    ############################## END Tcl ONLY ###############################
    ###########################################################################
  }

  #
  # NOTE: Provide the Eagle test constraints package to the interpreter.
  #
  package provide Eagle.Test.Constraints \
    [expr {[isEagle] ? [info engine PatchLevel] : "1.0"}]
}


  #############################################################################
  ####################### BEGIN Tcl & Eagle Constraints #######################
  #############################################################################

  tputs $test_channel [appendArgs \
      "---- start of common (Tcl & Eagle) test constraints...\n"]

  #
  # NOTE: Has checking for the test configuration been disabled?
  #
  if {![info exists no(testConfiguration)]} then {
    checkForTestConfiguration $test_channel
  }

  #
  # NOTE: Has checking for the extra files needed by various tests been
  #       disabled?
  #
  if {![info exists no(checkForFile)]} then {
    #

<?xml version="1.0" encoding="utf-8"?>
<!--
 *
 * sqlite3.props -
 *
 * Written by Joe Mistachkin.
 * Released to the public domain, use at your own risk!
 *
-->
<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003" ToolsVersion="4.0">
  <PropertyGroup Label="UserMacros">
    <SQLITE_MANIFEST_VERSION>3.7.11.0</SQLITE_MANIFEST_VERSION>
    <SQLITE_RC_VERSION>3,7,11,0</SQLITE_RC_VERSION>
    <SQLITE_COMMON_DEFINES>SQLITE_THREADSAFE=1;SQLITE_ENABLE_COLUMN_METADATA=1;SQLITE_ENABLE_STAT3=1;SQLITE_ENABLE_FTS3=1;SQLITE_ENABLE_LOAD_EXTENSION=1;SQLITE_ENABLE_RTREE=1;SQLITE_SOUNDEX=1</SQLITE_COMMON_DEFINES>
    <SQLITE_EXTRA_DEFINES>SQLITE_HAS_CODEC=1</SQLITE_EXTRA_DEFINES>
    <SQLITE_WINCE_DEFINES>SQLITE_OMIT_WAL=1</SQLITE_WINCE_DEFINES>
    <SQLITE_DEBUG_DEFINES>SQLITE_DEBUG=1;SQLITE_MEMDEBUG=1</SQLITE_DEBUG_DEFINES>
    <SQLITE_RELEASE_DEFINES>SQLITE_WIN32_MALLOC=1</SQLITE_RELEASE_DEFINES>
    <SQLITE_DISABLE_WARNINGS>4018;4055;4057;4090;4100;4127;4132;4146;4152;4210;4232;4244;4245;4389;4701;4706;4996</SQLITE_DISABLE_WARNINGS>
    <SQLITE_DISABLE_X64_WARNINGS>4232;4267;4306</SQLITE_DISABLE_X64_WARNINGS>

<VisualStudioPropertySheet
	ProjectType="Visual C++"
	Version="8.00"
	Name="sqlite3"
	>
	<UserMacro
		Name="SQLITE_MANIFEST_VERSION"
		Value="3.7.11.0"
		PerformEnvironmentSet="true"
	/>
	<UserMacro
		Name="SQLITE_RC_VERSION"
		Value="3,7,11,0"
		PerformEnvironmentSet="true"
	/>
	<UserMacro
		Name="SQLITE_COMMON_DEFINES"
		Value="SQLITE_THREADSAFE=1;SQLITE_ENABLE_COLUMN_METADATA=1;SQLITE_ENABLE_STAT3=1;SQLITE_ENABLE_FTS3=1;SQLITE_ENABLE_LOAD_EXTENSION=1;SQLITE_ENABLE_RTREE=1;SQLITE_SOUNDEX=1"
		PerformEnvironmentSet="true"
	/>

/******************************************************************************
** This file is an amalgamation of many separate C source files from SQLite
** version 3.7.11.  By combining all the individual C code files into this 
** single large file, the entire code can be compiled as a single translation
** unit.  This allows many compilers to do optimizations that would not be
** possible if the files were compiled separately.  Performance improvements
** of 5% or more are commonly seen when SQLite is compiled as a single
** translation unit.
**
** This file is all you need to compile SQLite.  To use SQLite in other

** string contains the date and time of the check-in (UTC) and an SHA1
** hash of the entire source tree.
**
** See also: [sqlite3_libversion()],
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
#define SQLITE_VERSION        "3.7.11"
#define SQLITE_VERSION_NUMBER 3007011
#define SQLITE_SOURCE_ID      "2012-03-19 17:42:46 036395c0a8e08883b11df025e3da9e2461e4b1eb"

/*
** CAPI3REF: Run-Time Library Version Numbers
** KEYWORDS: sqlite3_version, sqlite3_sourceid
**
** These interfaces provide the same information as the [SQLITE_VERSION],
** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros

#define SQLITE_IOERR_SEEK              (SQLITE_IOERR | (22<<8))
#define SQLITE_LOCKED_SHAREDCACHE      (SQLITE_LOCKED |  (1<<8))
#define SQLITE_BUSY_RECOVERY           (SQLITE_BUSY   |  (1<<8))
#define SQLITE_CANTOPEN_NOTEMPDIR      (SQLITE_CANTOPEN | (1<<8))
#define SQLITE_CORRUPT_VTAB            (SQLITE_CORRUPT | (1<<8))
#define SQLITE_READONLY_RECOVERY       (SQLITE_READONLY | (1<<8))
#define SQLITE_READONLY_CANTLOCK       (SQLITE_READONLY | (2<<8))
#define SQLITE_ABORT_ROLLBACK          (SQLITE_ABORT | (2<<8))

/*
** CAPI3REF: Flags For File Open Operations
**
** These bit values are intended for use in the
** 3rd parameter to the [sqlite3_open_v2()] interface and
** in the 4th parameter to the [sqlite3_vfs.xOpen] method.

** The [SQLITE_FCNTL_LOCKSTATE] opcode is used for debugging.  This
** opcode causes the xFileControl method to write the current state of
** the lock (one of [SQLITE_LOCK_NONE], [SQLITE_LOCK_SHARED],
** [SQLITE_LOCK_RESERVED], [SQLITE_LOCK_PENDING], or [SQLITE_LOCK_EXCLUSIVE])
** into an integer that the pArg argument points to. This capability
** is used during testing and only needs to be supported when SQLITE_TEST
** is defined.
** <ul>
** <li>[[SQLITE_FCNTL_SIZE_HINT]]
** The [SQLITE_FCNTL_SIZE_HINT] opcode is used by SQLite to give the VFS
** layer a hint of how large the database file will grow to be during the
** current transaction.  This hint is not guaranteed to be accurate but it
** is often close.  The underlying VFS might choose to preallocate database
** file space based on this hint in order to help writes to the database
** file run faster.
**
** <li>[[SQLITE_FCNTL_CHUNK_SIZE]]
** The [SQLITE_FCNTL_CHUNK_SIZE] opcode is used to request that the VFS
** extends and truncates the database file in chunks of a size specified
** by the user. The fourth argument to [sqlite3_file_control()] should 
** point to an integer (type int) containing the new chunk-size to use
** for the nominated database. Allocating database file space in large
** chunks (say 1MB at a time), may reduce file-system fragmentation and
** improve performance on some systems.
**
** <li>[[SQLITE_FCNTL_FILE_POINTER]]
** The [SQLITE_FCNTL_FILE_POINTER] opcode is used to obtain a pointer
** to the [sqlite3_file] object associated with a particular database
** connection.  See the [sqlite3_file_control()] documentation for
** additional information.
**
** <li>[[SQLITE_FCNTL_SYNC_OMITTED]]
** ^(The [SQLITE_FCNTL_SYNC_OMITTED] opcode is generated internally by
** SQLite and sent to all VFSes in place of a call to the xSync method
** when the database connection has [PRAGMA synchronous] set to OFF.)^
** Some specialized VFSes need this signal in order to operate correctly
** when [PRAGMA synchronous | PRAGMA synchronous=OFF] is set, but most 
** VFSes do not need this signal and should silently ignore this opcode.
** Applications should not call [sqlite3_file_control()] with this
** opcode as doing so may disrupt the operation of the specialized VFSes
** that do require it.  
**
** <li>[[SQLITE_FCNTL_WIN32_AV_RETRY]]
** ^The [SQLITE_FCNTL_WIN32_AV_RETRY] opcode is used to configure automatic
** retry counts and intervals for certain disk I/O operations for the
** windows [VFS] in order to provide robustness in the presence of
** anti-virus programs.  By default, the windows VFS will retry file read,
** file write, and file delete operations up to 10 times, with a delay
** of 25 milliseconds before the first retry and with the delay increasing
** by an additional 25 milliseconds with each subsequent retry.  This
** opcode allows these two values (10 retries and 25 milliseconds of delay)
** to be adjusted.  The values are changed for all database connections
** within the same process.  The argument is a pointer to an array of two
** integers where the first integer i the new retry count and the second
** integer is the delay.  If either integer is negative, then the setting
** is not changed but instead the prior value of that setting is written
** into the array entry, allowing the current retry settings to be
** interrogated.  The zDbName parameter is ignored.
**
** <li>[[SQLITE_FCNTL_PERSIST_WAL]]
** ^The [SQLITE_FCNTL_PERSIST_WAL] opcode is used to set or query the
** persistent [WAL | Write AHead Log] setting.  By default, the auxiliary
** write ahead log and shared memory files used for transaction control
** are automatically deleted when the latest connection to the database
** closes.  Setting persistent WAL mode causes those files to persist after
** close.  Persisting the files is useful when other processes that do not
** have write permission on the directory containing the database file want
** to read the database file, as the WAL and shared memory files must exist
** in order for the database to be readable.  The fourth parameter to
** [sqlite3_file_control()] for this opcode should be a pointer to an integer.
** That integer is 0 to disable persistent WAL mode or 1 to enable persistent
** WAL mode.  If the integer is -1, then it is overwritten with the current
** WAL persistence setting.
**
** <li>[[SQLITE_FCNTL_POWERSAFE_OVERWRITE]]
** ^The [SQLITE_FCNTL_POWERSAFE_OVERWRITE] opcode is used to set or query the
** persistent "powersafe-overwrite" or "PSOW" setting.  The PSOW setting
** determines the [SQLITE_IOCAP_POWERSAFE_OVERWRITE] bit of the
** xDeviceCharacteristics methods. The fourth parameter to
** [sqlite3_file_control()] for this opcode should be a pointer to an integer.
** That integer is 0 to disable zero-damage mode or 1 to enable zero-damage
** mode.  If the integer is -1, then it is overwritten with the current
** zero-damage mode setting.
**
** <li>[[SQLITE_FCNTL_OVERWRITE]]
** ^The [SQLITE_FCNTL_OVERWRITE] opcode is invoked by SQLite after opening
** a write transaction to indicate that, unless it is rolled back for some
** reason, the entire database file will be overwritten by the current 
** transaction. This is used by VACUUM operations.
**
** <li>[[SQLITE_FCNTL_VFSNAME]]
** ^The [SQLITE_FCNTL_VFSNAME] opcode can be used to obtain the names of
** all [VFSes] in the VFS stack.  The names are of all VFS shims and the
** final bottom-level VFS are written into memory obtained from 
** [sqlite3_malloc()] and the result is stored in the char* variable
** that the fourth parameter of [sqlite3_file_control()] points to.
** The caller is responsible for freeing the memory when done.  As with
** all file-control actions, there is no guarantee that this will actually
** do anything.  Callers should initialize the char* variable to a NULL
** pointer in case this file-control is not implemented.  This file-control
** is intended for diagnostic use only.
**
** <li>[[SQLITE_FCNTL_PRAGMA]]
** ^Whenever a [PRAGMA] statement is parsed, an [SQLITE_FCNTL_PRAGMA] 
** file control is sent to the open [sqlite3_file] object corresponding
** to the database file to which the pragma statement refers. ^The argument
** to the [SQLITE_FCNTL_PRAGMA] file control is an array of
** pointers to strings (char**) in which the second element of the array
** is the name of the pragma and the third element is the argument to the
** pragma or NULL if the pragma has no argument.  ^The handler for an
** [SQLITE_FCNTL_PRAGMA] file control can optionally make the first element
** of the char** argument point to a string obtained from [sqlite3_mprintf()]
** or the equivalent and that string will become the result of the pragma or
** the error message if the pragma fails. ^If the
** [SQLITE_FCNTL_PRAGMA] file control returns [SQLITE_NOTFOUND], then normal 
** [PRAGMA] processing continues.  ^If the [SQLITE_FCNTL_PRAGMA]
** file control returns [SQLITE_OK], then the parser assumes that the
** VFS has handled the PRAGMA itself and the parser generates a no-op
** prepared statement.  ^If the [SQLITE_FCNTL_PRAGMA] file control returns
** any result code other than [SQLITE_OK] or [SQLITE_NOTFOUND], that means
** that the VFS encountered an error while handling the [PRAGMA] and the
** compilation of the PRAGMA fails with an error.  ^The [SQLITE_FCNTL_PRAGMA]
** file control occurs at the beginning of pragma statement analysis and so
** it is able to override built-in [PRAGMA] statements.
** </ul>
*/
#define SQLITE_FCNTL_LOCKSTATE               1
#define SQLITE_GET_LOCKPROXYFILE             2
#define SQLITE_SET_LOCKPROXYFILE             3
#define SQLITE_LAST_ERRNO                    4
#define SQLITE_FCNTL_SIZE_HINT               5
#define SQLITE_FCNTL_CHUNK_SIZE              6
#define SQLITE_FCNTL_FILE_POINTER            7
#define SQLITE_FCNTL_SYNC_OMITTED            8
#define SQLITE_FCNTL_WIN32_AV_RETRY          9
#define SQLITE_FCNTL_PERSIST_WAL            10
#define SQLITE_FCNTL_OVERWRITE              11
#define SQLITE_FCNTL_VFSNAME                12
#define SQLITE_FCNTL_POWERSAFE_OVERWRITE    13
#define SQLITE_FCNTL_PRAGMA                 14

/*
** CAPI3REF: Mutex Handle
**
** The mutex module within SQLite defines [sqlite3_mutex] to be an
** abstract type for a mutex object.  The SQLite core never looks
** at the internal representation of an [sqlite3_mutex].  It only

** parameter if it exists or a NULL pointer if P does not appear as a 
** query parameter on F.  If P is a query parameter of F
** has no explicit value, then sqlite3_uri_parameter(F,P) returns
** a pointer to an empty string.
**
** The sqlite3_uri_boolean(F,P,B) routine assumes that P is a boolean
** parameter and returns true (1) or false (0) according to the value
** of P.  The sqlite3_uri_boolean(F,P,B) routine returns true (1) if the
** value of query parameter P is one of "yes", "true", or "on" in any
** case or if the value begins with a non-zero number.  The 
** sqlite3_uri_boolean(F,P,B) routines returns false (0) if the value of
** query parameter P is one of "no", "false", or "off" in any case or
** if the value begins with a numeric zero.  If P is not a query
** parameter on F or if the value of P is does not match any of the
** above, then sqlite3_uri_boolean(F,P,B) returns (B!=0).
**
** The sqlite3_uri_int64(F,P,D) routine converts the value of P into a
** 64-bit signed integer and returns that integer, or D if P does not
** exist.  If the value of P is something other than an integer, then
** zero is returned.
** 
** If F is a NULL pointer, then sqlite3_uri_parameter(F,P) returns NULL and

** ^The filename returned by this function is the output of the
** xFullPathname method of the [VFS].  ^In other words, the filename
** will be an absolute pathname, even if the filename used
** to open the database originally was a URI or relative pathname.
*/
SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName);

/*
** CAPI3REF: Determine if a database is read-only
**
** ^The sqlite3_db_readonly(D,N) interface returns 1 if the database N
** of connection D is read-only, 0 if it is read/write, or -1 if N is not
** the name of a database on connection D.
*/
SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const char *zDbName);

/*
** CAPI3REF: Find the next prepared statement
**
** ^This interface returns a pointer to the next [prepared statement] after
** pStmt associated with the [database connection] pDb.  ^If pStmt is NULL
** then this interface returns a pointer to the first prepared statement
** associated with the database connection pDb.  ^If no prepared statement

  void *pNotifyArg                            /* Argument to pass to xNotify */
);


/*
** CAPI3REF: String Comparison
**
** ^The [sqlite3_stricmp()] and [sqlite3_strnicmp()] APIs allow applications
** and extensions to compare the contents of two buffers containing UTF-8
** strings in a case-independent fashion, using the same definition of "case
** independence" that SQLite uses internally when comparing identifiers.
*/
SQLITE_API int sqlite3_stricmp(const char *, const char *);
SQLITE_API int sqlite3_strnicmp(const char *, const char *, int);

/*
** CAPI3REF: Error Logging Interface
**
** ^The [sqlite3_log()] interface writes a message into the error log
** established by the [SQLITE_CONFIG_LOG] option to [sqlite3_config()].

** A convenience macro that returns the number of elements in
** an array.
*/
#define ArraySize(X)    ((int)(sizeof(X)/sizeof(X[0])))

/*
** The following value as a destructor means to use sqlite3DbFree().
** The sqlite3DbFree() routine requires two parameters instead of the 
** one parameter that destructors normally want.  So we have to introduce 
** this magic value that the code knows to handle differently.  Any 
** pointer will work here as long as it is distinct from SQLITE_STATIC
** and SQLITE_TRANSIENT.
*/
#define SQLITE_DYNAMIC   ((sqlite3_destructor_type)sqlite3MallocSize)

/*
** When SQLITE_OMIT_WSD is defined, it means that the target platform does
** not support Writable Static Data (WSD) such as global and static variables.
** All variables must either be on the stack or dynamically allocated from
** the heap.  When WSD is unsupported, the variable declarations scattered
** throughout the SQLite code must become constants instead.  The SQLITE_WSD

/* The flags parameter to sqlite3BtreeOpen can be the bitwise or of the
** following values.
**
** NOTE:  These values must match the corresponding PAGER_ values in
** pager.h.
*/
#define BTREE_OMIT_JOURNAL  1  /* Do not create or use a rollback journal */

#define BTREE_MEMORY        2  /* This is an in-memory DB */
#define BTREE_SINGLE        4  /* The file contains at most 1 b-tree */
#define BTREE_UNORDERED     8  /* Use of a hash implementation is OK */

SQLITE_PRIVATE int sqlite3BtreeClose(Btree*);
SQLITE_PRIVATE int sqlite3BtreeSetCacheSize(Btree*,int);
SQLITE_PRIVATE int sqlite3BtreeSetSafetyLevel(Btree*,int,int,int);
SQLITE_PRIVATE int sqlite3BtreeSyncDisabled(Btree*);
SQLITE_PRIVATE int sqlite3BtreeSetPageSize(Btree *p, int nPagesize, int nReserve, int eFix);
SQLITE_PRIVATE int sqlite3BtreeGetPageSize(Btree*);
SQLITE_PRIVATE int sqlite3BtreeMaxPageCount(Btree*,int);
SQLITE_PRIVATE u32 sqlite3BtreeLastPage(Btree*);
SQLITE_PRIVATE int sqlite3BtreeSecureDelete(Btree*,int);
SQLITE_PRIVATE int sqlite3BtreeGetReserve(Btree*);
SQLITE_PRIVATE int sqlite3BtreeSetAutoVacuum(Btree *, int);
SQLITE_PRIVATE int sqlite3BtreeGetAutoVacuum(Btree *);
SQLITE_PRIVATE int sqlite3BtreeBeginTrans(Btree*,int);
SQLITE_PRIVATE int sqlite3BtreeCommitPhaseOne(Btree*, const char *zMaster);
SQLITE_PRIVATE int sqlite3BtreeCommitPhaseTwo(Btree*, int);
SQLITE_PRIVATE int sqlite3BtreeCommit(Btree*);
SQLITE_PRIVATE int sqlite3BtreeRollback(Btree*,int);
SQLITE_PRIVATE int sqlite3BtreeBeginStmt(Btree*,int);
SQLITE_PRIVATE int sqlite3BtreeCreateTable(Btree*, int*, int flags);
SQLITE_PRIVATE int sqlite3BtreeIsInTrans(Btree*);
SQLITE_PRIVATE int sqlite3BtreeIsInReadTrans(Btree*);
SQLITE_PRIVATE int sqlite3BtreeIsInBackup(Btree*);
SQLITE_PRIVATE void *sqlite3BtreeSchema(Btree *, int, void(*)(void *));
SQLITE_PRIVATE int sqlite3BtreeSchemaLocked(Btree *pBtree);

/*
** Allowed values for the flags parameter to sqlite3PagerOpen().
**
** NOTE: These values must match the corresponding BTREE_ values in btree.h.
*/
#define PAGER_OMIT_JOURNAL  0x0001    /* Do not use a rollback journal */

#define PAGER_MEMORY        0x0002    /* In-memory database */

/*
** Valid values for the second argument to sqlite3PagerLockingMode().
*/
#define PAGER_LOCKINGMODE_QUERY      -1
#define PAGER_LOCKINGMODE_NORMAL      0
#define PAGER_LOCKINGMODE_EXCLUSIVE   1

SQLITE_PRIVATE int sqlite3PagerSharedLock(Pager *pPager);

SQLITE_PRIVATE int sqlite3PagerCheckpoint(Pager *pPager, int, int*, int*);
SQLITE_PRIVATE int sqlite3PagerWalSupported(Pager *pPager);
SQLITE_PRIVATE int sqlite3PagerWalCallback(Pager *pPager);
SQLITE_PRIVATE int sqlite3PagerOpenWal(Pager *pPager, int *pisOpen);
SQLITE_PRIVATE int sqlite3PagerCloseWal(Pager *pPager);
#ifdef SQLITE_ENABLE_ZIPVFS
SQLITE_PRIVATE   int sqlite3PagerWalFramesize(Pager *pPager);
#endif

/* Functions used to query pager state and configuration. */
SQLITE_PRIVATE u8 sqlite3PagerIsreadonly(Pager*);
SQLITE_PRIVATE int sqlite3PagerRefcount(Pager*);
SQLITE_PRIVATE int sqlite3PagerMemUsed(Pager*);
SQLITE_PRIVATE const char *sqlite3PagerFilename(Pager*);
SQLITE_PRIVATE const sqlite3_vfs *sqlite3PagerVfs(Pager*);

** structure.
*/
struct PgHdr {
  sqlite3_pcache_page *pPage;    /* Pcache object page handle */
  void *pData;                   /* Page data */
  void *pExtra;                  /* Extra content */
  PgHdr *pDirty;                 /* Transient list of dirty pages */

  Pager *pPager;                 /* The pager this page is part of */
  Pgno pgno;                     /* Page number for this page */
#ifdef SQLITE_CHECK_PAGES
  u32 pageHash;                  /* Hash of page content */
#endif
  u16 flags;                     /* PGHDR flags defined below */

  /**********************************************************************
  ** Elements above are public.  All that follows is private to pcache.c

# define SQLITE_TEMPNAME_SIZE (CCHMAXPATHCOMP)
#else
# define SQLITE_TEMPNAME_SIZE 200
#endif

/*
** Determine if we are dealing with Windows NT.
**
** We ought to be able to determine if we are compiling for win98 or winNT
** using the _WIN32_WINNT macro as follows:
**
** #if defined(_WIN32_WINNT)
** # define SQLITE_OS_WINNT 1
** #else
** # define SQLITE_OS_WINNT 0
** #endif
**
** However, vs2005 does not set _WIN32_WINNT by default, as it ought to,
** so the above test does not work.  We'll just assume that everything is
** winNT unless the programmer explicitly says otherwise by setting
** SQLITE_OS_WINNT to 0.
*/
#if SQLITE_OS_WIN && !defined(SQLITE_OS_WINNT)
# define SQLITE_OS_WINNT 1
#endif

/*
** Determine if we are dealing with WindowsCE - which has a much
** reduced API.
*/
#if defined(_WIN32_WCE)

*/
struct FuncDefHash {
  FuncDef *a[23];       /* Hash table for functions */
};

/*
** Each database connection is an instance of the following structure.























*/
struct sqlite3 {
  sqlite3_vfs *pVfs;            /* OS Interface */
  struct Vdbe *pVdbe;           /* List of active virtual machines */
  CollSeq *pDfltColl;           /* The default collating sequence (BINARY) */
  sqlite3_mutex *mutex;         /* Connection mutex */
  Db *aDb;                      /* All backends */
  int nDb;                      /* Number of backends currently in use */
  int flags;                    /* Miscellaneous flags. See below */
  i64 lastRowid;                /* ROWID of most recent insert (see above) */
  unsigned int openFlags;       /* Flags passed to sqlite3_vfs.xOpen() */
  int errCode;                  /* Most recent error code (SQLITE_*) */
  int errMask;                  /* & result codes with this before returning */
  u8 autoCommit;                /* The auto-commit flag. */
  u8 temp_store;                /* 1: file 2: memory 0: default */
  u8 mallocFailed;              /* True if we have seen a malloc failure */
  u8 dfltLockMode;              /* Default locking-mode for attached dbs */
  signed char nextAutovac;      /* Autovac setting after VACUUM if >=0 */
  u8 suppressErr;               /* Do not issue error messages if true */
  u8 vtabOnConflict;            /* Value to return for s3_vtab_on_conflict() */
  u8 isTransactionSavepoint;    /* True if the outermost savepoint is a TS */
  int nextPagesize;             /* Pagesize after VACUUM if >0 */



  u32 magic;                    /* Magic number for detect library misuse */
  int nChange;                  /* Value returned by sqlite3_changes() */
  int nTotalChange;             /* Value returned by sqlite3_total_changes() */

  int aLimit[SQLITE_N_LIMIT];   /* Limits */
  struct sqlite3InitInfo {      /* Information used during initialization */

    int newTnum;                /* Rootpage of table being initialized */
    u8 iDb;                     /* Which db file is being initialized */
    u8 busy;                    /* TRUE if currently initializing */
    u8 orphanTrigger;           /* Last statement is orphaned TEMP trigger */
  } init;



  int activeVdbeCnt;            /* Number of VDBEs currently executing */
  int writeVdbeCnt;             /* Number of active VDBEs that are writing */
  int vdbeExecCnt;              /* Number of nested calls to VdbeExec() */
  int nExtension;               /* Number of loaded extensions */
  void **aExtension;            /* Array of shared library handles */
  void (*xTrace)(void*,const char*);        /* Trace function */
  void *pTraceArg;                          /* Argument to the trace function */
  void (*xProfile)(void*,const char*,u64);  /* Profiling function */
  void *pProfileArg;                        /* Argument to profile function */
  void *pCommitArg;                 /* Argument to xCommitCallback() */   
  int (*xCommitCallback)(void*);    /* Invoked at every commit. */
  void *pRollbackArg;               /* Argument to xRollbackCallback() */   

#endif
#ifndef SQLITE_OMIT_PROGRESS_CALLBACK
  int (*xProgress)(void *);     /* The progress callback */
  void *pProgressArg;           /* Argument to the progress callback */
  int nProgressOps;             /* Number of opcodes for progress callback */
#endif
#ifndef SQLITE_OMIT_VIRTUALTABLE
  int nVTrans;                  /* Allocated size of aVTrans */
  Hash aModule;                 /* populated by sqlite3_create_module() */
  VtabCtx *pVtabCtx;            /* Context for active vtab connect/create */
  VTable **aVTrans;             /* Virtual tables with open transactions */

  VTable *pDisconnect;    /* Disconnect these in next sqlite3_prepare() */
#endif
  FuncDefHash aFunc;            /* Hash table of connection functions */
  Hash aCollSeq;                /* All collating sequences */
  BusyHandler busyHandler;      /* Busy callback */

  Db aDbStatic[2];              /* Static space for the 2 default backends */
  Savepoint *pSavepoint;        /* List of active savepoints */
  int busyTimeout;              /* Busy handler timeout, in msec */
  int nSavepoint;               /* Number of non-transaction savepoints */
  int nStatement;               /* Number of nested statement-transactions  */

  i64 nDeferredCons;            /* Net deferred constraints this transaction. */
  int *pnBytesFreed;            /* If not NULL, increment this in DbFree() */

#ifdef SQLITE_ENABLE_UNLOCK_NOTIFY
  /* The following variables are all protected by the STATIC_MASTER 
  ** mutex, not by sqlite3.mutex. They are used by code in notify.c. 
  **

                                          /*   DELETE, or UPDATE and return */
                                          /*   the count using a callback. */
#define SQLITE_NullCallback   0x00002000  /* Invoke the callback once if the */
                                          /*   result set is empty */
#define SQLITE_SqlTrace       0x00004000  /* Debug print SQL as it executes */
#define SQLITE_VdbeListing    0x00008000  /* Debug listings of VDBE programs */
#define SQLITE_WriteSchema    0x00010000  /* OK to update SQLITE_MASTER */
                         /*   0x00020000  Unused */

#define SQLITE_IgnoreChecks   0x00040000  /* Do not enforce check constraints */
#define SQLITE_ReadUncommitted 0x0080000  /* For shared-cache mode */
#define SQLITE_LegacyFileFmt  0x00100000  /* Create new databases in format 1 */
#define SQLITE_FullFSync      0x00200000  /* Use full fsync on the backend */
#define SQLITE_CkptFullFSync  0x00400000  /* Use full fsync for checkpoint */
#define SQLITE_RecoveryMode   0x00800000  /* Ignore schema errors */
#define SQLITE_ReverseOrder   0x01000000  /* Reverse unordered SELECTs */

/*
** Possible values for FuncDef.flags
*/
#define SQLITE_FUNC_LIKE     0x01 /* Candidate for the LIKE optimization */
#define SQLITE_FUNC_CASE     0x02 /* Case-sensitive LIKE-type function */
#define SQLITE_FUNC_EPHEM    0x04 /* Ephemeral.  Delete with VDBE */
#define SQLITE_FUNC_NEEDCOLL 0x08 /* sqlite3GetFuncCollSeq() might be called */

#define SQLITE_FUNC_COUNT    0x20 /* Built-in count(*) aggregate */
#define SQLITE_FUNC_COALESCE 0x40 /* Built-in coalesce() or ifnull() function */

/*
** The following three macros, FUNCTION(), LIKEFUNC() and AGGREGATE() are
** used to create the initializers for the FuncDef structures.
**

** Allowed values for Tabe.tabFlags.
*/
#define TF_Readonly        0x01    /* Read-only system table */
#define TF_Ephemeral       0x02    /* An ephemeral table */
#define TF_HasPrimaryKey   0x04    /* Table has a primary key */
#define TF_Autoincrement   0x08    /* Integer primary key is autoincrement */
#define TF_Virtual         0x10    /* Is a virtual table */




/*
** Test to see whether or not a table is a virtual table.  This is
** done as a macro so that it will be optimized out when virtual
** table support is omitted from the build.
*/

** it means this is not a unique index.  Otherwise it is a unique index
** and the value of Index.onError indicate the which conflict resolution 
** algorithm to employ whenever an attempt is made to insert a non-unique
** element.
*/
struct Index {
  char *zName;     /* Name of this index */

  int *aiColumn;   /* Which columns are used by this index.  1st is 0 */
  tRowcnt *aiRowEst; /* Result of ANALYZE: Est. rows selected by each column */
  Table *pTable;   /* The SQL table being indexed */




  char *zColAff;   /* String defining the affinity of each column */
  Index *pNext;    /* The next index associated with the same table */
  Schema *pSchema; /* Schema containing this index */
  u8 *aSortOrder;  /* Array of size Index.nColumn. True==DESC, False==ASC */
  char **azColl;   /* Array of collation sequence names for index */
  int nColumn;     /* Number of columns in the table used by this index */
  int tnum;        /* Page containing root of this index in database file */
  u8 onError;      /* OE_Abort, OE_Ignore, OE_Replace, or OE_None */
  u8 autoIndex;    /* True if is automatically created (ex: by UNIQUE) */
  u8 bUnordered;   /* Use this index for == or IN queries only */
#ifdef SQLITE_ENABLE_STAT3
  int nSample;             /* Number of elements in aSample[] */
  tRowcnt avgEq;           /* Average nEq value for key values not in aSample */
  IndexSample *aSample;    /* Samples of the left-most key */
#endif
};

struct AggInfo {
  u8 directMode;          /* Direct rendering mode means take data directly
                          ** from source tables rather than from accumulators */
  u8 useSortingIdx;       /* In direct mode, reference the sorting index rather
                          ** than the source table */
  int sortingIdx;         /* Cursor number of the sorting index */
  int sortingIdxPTab;     /* Cursor number of pseudo-table */

  int nSortingColumn;     /* Number of columns in the sorting index */
  ExprList *pGroupBy;     /* The group by clause */
  struct AggInfo_col {    /* For each column used in source tables */
    Table *pTab;             /* Source table */
    int iTable;              /* Cursor number of the source table */
    int iColumn;             /* Column number within the source table */
    int iSorterColumn;       /* Column number in the sorting index */
    int iMem;                /* Memory location that acts as accumulator */
    Expr *pExpr;             /* The original expression */
  } *aCol;
  int nColumn;            /* Number of used entries in aCol[] */

  int nAccumulator;       /* Number of columns that show through to the output.
                          ** Additional columns are used only as parameters to
                          ** aggregate functions */
  struct AggInfo_func {   /* For each aggregate function */
    Expr *pExpr;             /* Expression encoding the function */
    FuncDef *pFunc;          /* The aggregate function implementation */
    int iMem;                /* Memory location that acts as accumulator */
    int iDistinct;           /* Ephemeral table used to enforce DISTINCT */
  } *aFunc;
  int nFunc;              /* Number of entries in aFunc[] */

};

/*
** The datatype ynVar is a signed integer, either 16-bit or 32-bit.
** Usually it is 16-bits.  But if SQLITE_MAX_VARIABLE_NUMBER is greater
** than 32767 we have to make it 32-bit.  16-bit is preferred because
** it uses less memory in the Expr object, which is a big memory user

** as the list of "expr AS ID" fields following a "SELECT" or in the
** list of "ID = expr" items in an UPDATE.  A list of expressions can
** also be used as the argument to a function, in which case the a.zName
** field is not used.
*/
struct ExprList {
  int nExpr;             /* Number of expressions on the list */

  int iECursor;          /* VDBE Cursor associated with this ExprList */
  struct ExprList_item { /* For each expression in the list */
    Expr *pExpr;           /* The list of expressions */
    char *zName;           /* Token associated with this expression */
    char *zSpan;           /* Original text of the expression */
    u8 sortOrder;          /* 1 for DESC or 0 for ASC */
    u8 done;               /* A flag to indicate when processing is finished */
    u16 iOrderByCol;       /* For ORDER BY, column number in result set */
    u16 iAlias;            /* Index into Parse.aAlias[] for zName */
  } *a;                  /* Alloc a power of two greater or equal to nExpr */
};

/*
** An instance of this structure is used by the parser to record both
** the parse tree for an expression and the span of input text for an
** expression.
*/

*/
struct IdList {
  struct IdList_item {
    char *zName;      /* Name of the identifier */
    int idx;          /* Index in some Table.aCol[] of a column named zName */
  } *a;
  int nId;         /* Number of identifiers on the list */

};

/*
** The bitmask datatype defined below is used for various optimizations.
**
** Changing this from a 64-bit to a 32-bit type limits the number of
** tables in a join to 32 instead of 64.  But it also reduces the size

** sequences for the ORDER BY clause.
*/
struct Select {
  ExprList *pEList;      /* The fields of the result */
  u8 op;                 /* One of: TK_UNION TK_ALL TK_INTERSECT TK_EXCEPT */
  char affinity;         /* MakeRecord with this affinity for SRT_Set */
  u16 selFlags;          /* Various SF_* values */
  int iLimit, iOffset;   /* Memory registers holding LIMIT & OFFSET counters */
  int addrOpenEphm[3];   /* OP_OpenEphem opcodes related to this select */
  double nSelectRow;     /* Estimated number of result rows */
  SrcList *pSrc;         /* The FROM clause */
  Expr *pWhere;          /* The WHERE clause */
  ExprList *pGroupBy;    /* The GROUP BY clause */
  Expr *pHaving;         /* The HAVING clause */
  ExprList *pOrderBy;    /* The ORDER BY clause */
  Select *pPrior;        /* Prior select in a compound select statement */
  Select *pNext;         /* Next select to the left in a compound */
  Select *pRightmost;    /* Right-most select in a compound select statement */
  Expr *pLimit;          /* LIMIT expression. NULL means not used. */
  Expr *pOffset;         /* OFFSET expression. NULL means not used. */



};

/*
** Allowed values for Select.selFlags.  The "SF" prefix stands for
** "Select Flag".
*/
#define SF_Distinct        0x01  /* Output should be DISTINCT */
#define SF_Resolved        0x02  /* Identifiers have been resolved */
#define SF_Aggregate       0x04  /* Contains aggregate functions */
#define SF_UsesEphemeral   0x08  /* Uses the OpenEphemeral opcode */
#define SF_Expanded        0x10  /* sqlite3SelectExpand() called on this */
#define SF_HasTypeInfo     0x20  /* FROM subqueries have Table metadata */
#define SF_UseSorter       0x40  /* Sort using a sorter */
#define SF_Values          0x80  /* Synthesized from VALUES clause */


/*
** The results of a select can be distributed in several ways.  The
** "SRT" prefix means "SELECT Result Type".
*/
#define SRT_Union        1  /* Store result as keys in an index */

** The TriggerPrg.aColmask[0] variable is set to a mask of old.* columns
** accessed (or set to 0 for triggers fired as a result of INSERT 
** statements). Similarly, the TriggerPrg.aColmask[1] variable is set to
** a mask of new.* columns used by the program.
*/
struct TriggerPrg {
  Trigger *pTrigger;      /* Trigger this program was coded from */
  TriggerPrg *pNext;      /* Next entry in Parse.pTriggerPrg list */
  SubProgram *pProgram;   /* Program implementing pTrigger/orconf */
  int orconf;             /* Default ON CONFLICT policy */
  u32 aColmask[2];        /* Masks of old.*, new.* columns accessed */

};

/*
** The yDbMask datatype for the bitmask of all attached databases.
*/
#if SQLITE_MAX_ATTACHED>30
  typedef sqlite3_uint64 yDbMask;

** feature is enabled (if sqlite3Tsd()->useSharedData is true). They are
** used to store the set of table-locks required by the statement being
** compiled. Function sqlite3TableLock() is used to add entries to the
** list.
*/
struct Parse {
  sqlite3 *db;         /* The main database structure */

  char *zErrMsg;       /* An error message */
  Vdbe *pVdbe;         /* An engine for executing database bytecode */
  int rc;              /* Return code from execution */
  u8 colNamesSet;      /* TRUE after OP_ColumnName has been issued to pVdbe */
  u8 checkSchema;      /* Causes schema cookie check after an error */
  u8 nested;           /* Number of nested calls to the parser/code generator */
  u8 nTempReg;         /* Number of temporary registers in aTempReg[] */
  u8 nTempInUse;       /* Number of aTempReg[] currently checked out */
  u8 nColCache;        /* Number of entries in aColCache[] */
  u8 iColCache;        /* Next entry in aColCache[] to replace */
  u8 isMultiWrite;     /* True if statement may modify/insert multiple rows */
  u8 mayAbort;         /* True if statement may throw an ABORT exception */
  int aTempReg[8];     /* Holding area for temporary registers */
  int nRangeReg;       /* Size of the temporary register block */
  int iRangeReg;       /* First register in temporary register block */
  int nErr;            /* Number of errors seen */
  int nTab;            /* Number of previously allocated VDBE cursors */
  int nMem;            /* Number of memory cells used so far */
  int nSet;            /* Number of sets used so far */
  int nOnce;           /* Number of OP_Once instructions so far */
  int ckBase;          /* Base register of data during check constraints */
  int iCacheLevel;     /* ColCache valid when aColCache[].iLevel<=iCacheLevel */
  int iCacheCnt;       /* Counter used to generate aColCache[].lru values */


  struct yColCache {
    int iTable;           /* Table cursor number */
    int iColumn;          /* Table column number */
    u8 tempReg;           /* iReg is a temp register that needs to be freed */
    int iLevel;           /* Nesting level */
    int iReg;             /* Reg with value of this column. 0 means none. */
    int lru;              /* Least recently used entry has the smallest value */
  } aColCache[SQLITE_N_COLCACHE];  /* One for each column cache entry */
  yDbMask writeMask;   /* Start a write transaction on these databases */
  yDbMask cookieMask;  /* Bitmask of schema verified databases */


  int cookieGoto;      /* Address of OP_Goto to cookie verifier subroutine */
  int cookieValue[SQLITE_MAX_ATTACHED+2];  /* Values of cookies to verify */
  int regRowid;        /* Register holding rowid of CREATE TABLE entry */
  int regRoot;         /* Register holding root page number for new objects */
  int nMaxArg;         /* Max args passed to user function by sub-program */
#ifndef SQLITE_OMIT_SHARED_CACHE
  int nTableLock;        /* Number of locks in aTableLock */
  TableLock *aTableLock; /* Required table locks for shared-cache mode */
#endif


  AutoincInfo *pAinc;  /* Information about AUTOINCREMENT counters */


  /* Information used while coding trigger programs. */
  Parse *pToplevel;    /* Parse structure for main program (or NULL) */
  Table *pTriggerTab;  /* Table triggers are being coded for */
  double nQueryLoop;   /* Estimated number of iterations of a query */
  u32 oldmask;         /* Mask of old.* columns referenced */
  u32 newmask;         /* Mask of new.* columns referenced */
  u8 eTriggerOp;       /* TK_UPDATE, TK_INSERT or TK_DELETE */
  u8 eOrconf;          /* Default ON CONFLICT policy for trigger steps */
  u8 disableTriggers;  /* True to disable triggers */


  /* Above is constant between recursions.  Below is reset before and after
  ** each recursion */

  int nVar;                 /* Number of '?' variables seen in the SQL so far */
  int nzVar;                /* Number of available slots in azVar[] */
  u8 explain;               /* True if the EXPLAIN flag is found on the query */
#ifndef SQLITE_OMIT_VIRTUALTABLE
  u8 declareVtab;           /* True if inside sqlite3_declare_vtab() */
  int nVtabLock;            /* Number of virtual tables to lock */
#endif
  int nAlias;               /* Number of aliased result set columns */
  int nHeight;              /* Expression tree height of current sub-select */
#ifndef SQLITE_OMIT_EXPLAIN
  int iSelectId;            /* ID of current select for EXPLAIN output */
  int iNextSelectId;        /* Next available select ID for EXPLAIN output */
#endif
  char **azVar;             /* Pointers to names of parameters */
  Vdbe *pReprepare;         /* VM being reprepared (sqlite3Reprepare()) */

  int *aAlias;              /* Register used to hold aliased result */



  const char *zTail;        /* All SQL text past the last semicolon parsed */
  Table *pNewTable;         /* A table being constructed by CREATE TABLE */
  Trigger *pNewTrigger;     /* Trigger under construct by a CREATE TRIGGER */
  const char *zAuthContext; /* The 6th parameter to db->xAuth callbacks */
  Token sNameToken;         /* Token with unqualified schema object name */
  Token sLastToken;         /* The last token parsed */
#ifndef SQLITE_OMIT_VIRTUALTABLE
  Token sArg;               /* Complete text of a module argument */


  Table **apVtabLock;       /* Pointer to virtual tables needing locking */
#endif

  Table *pZombieTab;        /* List of Table objects to delete after code gen */
  TriggerPrg *pTriggerPrg;  /* Linked list of coded triggers */





};

/*
** Return true if currently inside an sqlite3_declare_vtab() call.
*/
#ifdef SQLITE_OMIT_VIRTUALTABLE
  #define IN_DECLARE_VTAB 0
#else
  #define IN_DECLARE_VTAB (pParse->declareVtab)
#endif

/*

/*
** A pointer to this structure is used to communicate information
** from sqlite3Init and OP_ParseSchema into the sqlite3InitCallback.
*/
typedef struct {
  sqlite3 *db;        /* The database being initialized */

  char **pzErrMsg;    /* Error message stored here */
  int iDb;            /* 0 for main database.  1 for TEMP, 2.. for ATTACHed */
  int rc;             /* Result code stored here */
} InitData;

/*
** Structure containing global configuration data for the SQLite library.
**
** This structure also contains some state information.

# define sqlite3Isxdigit(x)  isxdigit((unsigned char)(x))
# define sqlite3Tolower(x)   tolower((unsigned char)(x))
#endif

/*
** Internal function prototypes
*/
#define sqlite3StrICmp sqlite3_stricmp
SQLITE_PRIVATE int sqlite3Strlen30(const char*);
#define sqlite3StrNICmp sqlite3_strnicmp

SQLITE_PRIVATE int sqlite3MallocInit(void);
SQLITE_PRIVATE void sqlite3MallocEnd(void);
SQLITE_PRIVATE void *sqlite3Malloc(int);
SQLITE_PRIVATE void *sqlite3MallocZero(int);

SQLITE_PRIVATE void sqlite3AddCheckConstraint(Parse*, Expr*);
SQLITE_PRIVATE void sqlite3AddColumnType(Parse*,Token*);
SQLITE_PRIVATE void sqlite3AddDefaultValue(Parse*,ExprSpan*);
SQLITE_PRIVATE void sqlite3AddCollateType(Parse*, Token*);
SQLITE_PRIVATE void sqlite3EndTable(Parse*,Token*,Token*,Select*);
SQLITE_PRIVATE int sqlite3ParseUri(const char*,const char*,unsigned int*,
                    sqlite3_vfs**,char**,char **);
SQLITE_PRIVATE Btree *sqlite3DbNameToBtree(sqlite3*,const char*);
SQLITE_PRIVATE int sqlite3CodeOnce(Parse *);

SQLITE_PRIVATE Bitvec *sqlite3BitvecCreate(u32);
SQLITE_PRIVATE int sqlite3BitvecTest(Bitvec*, u32);
SQLITE_PRIVATE int sqlite3BitvecSet(Bitvec*, u32);
SQLITE_PRIVATE void sqlite3BitvecClear(Bitvec*, u32, void*);
SQLITE_PRIVATE void sqlite3BitvecDestroy(Bitvec*);

SQLITE_PRIVATE   void sqlite3AutoincrementBegin(Parse *pParse);
SQLITE_PRIVATE   void sqlite3AutoincrementEnd(Parse *pParse);
#else
# define sqlite3AutoincrementBegin(X)
# define sqlite3AutoincrementEnd(X)
#endif
SQLITE_PRIVATE void sqlite3Insert(Parse*, SrcList*, ExprList*, Select*, IdList*, int);
SQLITE_PRIVATE void *sqlite3ArrayAllocate(sqlite3*,void*,int,int*,int*);
SQLITE_PRIVATE IdList *sqlite3IdListAppend(sqlite3*, IdList*, Token*);
SQLITE_PRIVATE int sqlite3IdListIndex(IdList*,const char*);
SQLITE_PRIVATE SrcList *sqlite3SrcListEnlarge(sqlite3*, SrcList*, int, int);
SQLITE_PRIVATE SrcList *sqlite3SrcListAppend(sqlite3*, SrcList*, Token*, Token*);
SQLITE_PRIVATE SrcList *sqlite3SrcListAppendFromTerm(Parse*, SrcList*, Token*, Token*,
                                      Token*, Select*, Expr*, IdList*);
SQLITE_PRIVATE void sqlite3SrcListIndexedBy(Parse *, SrcList *, Token *);

SQLITE_PRIVATE int sqlite3ExprListCompare(ExprList*, ExprList*);
SQLITE_PRIVATE void sqlite3ExprAnalyzeAggregates(NameContext*, Expr*);
SQLITE_PRIVATE void sqlite3ExprAnalyzeAggList(NameContext*,ExprList*);
SQLITE_PRIVATE Vdbe *sqlite3GetVdbe(Parse*);
SQLITE_PRIVATE void sqlite3PrngSaveState(void);
SQLITE_PRIVATE void sqlite3PrngRestoreState(void);
SQLITE_PRIVATE void sqlite3PrngResetState(void);
SQLITE_PRIVATE void sqlite3RollbackAll(sqlite3*,int);
SQLITE_PRIVATE void sqlite3CodeVerifySchema(Parse*, int);
SQLITE_PRIVATE void sqlite3CodeVerifyNamedSchema(Parse*, const char *zDb);
SQLITE_PRIVATE void sqlite3BeginTransaction(Parse*, int);
SQLITE_PRIVATE void sqlite3CommitTransaction(Parse*);
SQLITE_PRIVATE void sqlite3RollbackTransaction(Parse*);
SQLITE_PRIVATE void sqlite3Savepoint(Parse*, int, Token*);
SQLITE_PRIVATE void sqlite3CloseSavepoints(sqlite3 *);

SQLITE_PRIVATE int sqlite3MulInt64(i64*,i64);
SQLITE_PRIVATE int sqlite3AbsInt32(int);
#ifdef SQLITE_ENABLE_8_3_NAMES
SQLITE_PRIVATE void sqlite3FileSuffix3(const char*, char*);
#else
# define sqlite3FileSuffix3(X,Y)
#endif
SQLITE_PRIVATE u8 sqlite3GetBoolean(const char *z,int);

SQLITE_PRIVATE const void *sqlite3ValueText(sqlite3_value*, u8);
SQLITE_PRIVATE int sqlite3ValueBytes(sqlite3_value*, u8);
SQLITE_PRIVATE void sqlite3ValueSetStr(sqlite3_value*, int, const void *,u8, 
                        void(*)(void*));
SQLITE_PRIVATE void sqlite3ValueFree(sqlite3_value*);
SQLITE_PRIVATE sqlite3_value *sqlite3ValueNew(sqlite3 *);

SQLITE_PRIVATE    void sqlite3VtabUnlock(VTable *);
SQLITE_PRIVATE    void sqlite3VtabUnlockList(sqlite3*);
SQLITE_PRIVATE    int sqlite3VtabSavepoint(sqlite3 *, int, int);
SQLITE_PRIVATE    VTable *sqlite3GetVTable(sqlite3*, Table*);
#  define sqlite3VtabInSync(db) ((db)->nVTrans>0 && (db)->aVTrans==0)
#endif
SQLITE_PRIVATE void sqlite3VtabMakeWritable(Parse*,Table*);
SQLITE_PRIVATE void sqlite3VtabBeginParse(Parse*, Token*, Token*, Token*, int);
SQLITE_PRIVATE void sqlite3VtabFinishParse(Parse*, Token*);
SQLITE_PRIVATE void sqlite3VtabArgInit(Parse*);
SQLITE_PRIVATE void sqlite3VtabArgExtend(Parse*, Token*);
SQLITE_PRIVATE int sqlite3VtabCallCreate(sqlite3*, int, const char *, char **);
SQLITE_PRIVATE int sqlite3VtabCallConnect(Parse*, Table*);
SQLITE_PRIVATE int sqlite3VtabCallDestroy(sqlite3*, int, const char *);
SQLITE_PRIVATE int sqlite3VtabBegin(sqlite3 *, VTable *);

**
** The currently executing frame is stored in Vdbe.pFrame. Vdbe.pFrame is
** set to NULL if the currently executing frame is the main program.
*/
typedef struct VdbeFrame VdbeFrame;
struct VdbeFrame {
  Vdbe *v;                /* VM this frame belongs to */
  VdbeFrame *pParent;     /* Parent of this frame, or NULL if parent is main */
  Op *aOp;                /* Program instructions for parent frame */

  Mem *aMem;              /* Array of memory cells for parent frame */

  u8 *aOnceFlag;          /* Array of OP_Once flags for parent frame */

  VdbeCursor **apCsr;     /* Array of Vdbe cursors for parent frame */
  void *token;            /* Copy of SubProgram.token */
  i64 lastRowid;          /* Last insert rowid (sqlite3.lastRowid) */
  u16 nCursor;            /* Number of entries in apCsr */
  int pc;                 /* Program Counter in parent (calling) frame */
  int nOp;                /* Size of aOp array */
  int nMem;               /* Number of entries in aMem */
  int nOnceFlag;          /* Number of entries in aOnceFlag */
  int nChildMem;          /* Number of memory cells for child frame */
  int nChildCsr;          /* Number of cursors for child frame */

  int nChange;            /* Statement changes (Vdbe.nChanges)     */

};

#define VdbeFrameMem(p) ((Mem *)&((u8 *)p)[ROUND8(sizeof(VdbeFrame))])

/*
** A value for VdbeCursor.cacheValid that means the cache is always invalid.
*/

** (Mem) which are only defined there.
*/
struct sqlite3_context {
  FuncDef *pFunc;       /* Pointer to function information.  MUST BE FIRST */
  VdbeFunc *pVdbeFunc;  /* Auxilary data, if created. */
  Mem s;                /* The return value is stored here */
  Mem *pMem;            /* Memory cell used to store aggregate context */
  CollSeq *pColl;       /* Collating sequence */
  int isError;          /* Error code returned by the function. */
  int skipFlag;         /* Skip skip accumulator loading if true */
};

/*
** An Explain object accumulates indented output which is helpful
** in describing recursive data structures.
*/
struct Explain {

  Mem **apArg;            /* Arguments to currently executing user function */
  Mem *aColName;          /* Column names to return */
  Mem *pResultSet;        /* Pointer to an array of results */
  int nMem;               /* Number of memory locations currently allocated */
  int nOp;                /* Number of instructions in the program */
  int nOpAlloc;           /* Number of slots allocated for aOp[] */
  int nLabel;             /* Number of labels used */

  int *aLabel;            /* Space to hold the labels */
  u16 nResColumn;         /* Number of columns in one row of the result set */
  u16 nCursor;            /* Number of slots in apCsr[] */
  u32 magic;              /* Magic number for sanity checking */
  char *zErrMsg;          /* Error message written here */
  Vdbe *pPrev,*pNext;     /* Linked list of VDBEs with the same Vdbe.db */
  VdbeCursor **apCsr;     /* One element of this array for each open cursor */

*************************************************************************
**
** This file contains low-level memory allocation drivers for when
** SQLite will use the standard C-library malloc/realloc/free interface
** to obtain the memory it needs.
**
** This file contains implementations of the low-level memory allocation
** routines specified in the sqlite3_mem_methods object.  The content of
** this file is only used if SQLITE_SYSTEM_MALLOC is defined.  The
** SQLITE_SYSTEM_MALLOC macro is defined automatically if neither the
** SQLITE_MEMDEBUG nor the SQLITE_WIN32_MALLOC macros are defined.  The
** default configuration is to use memory allocation routines in this
** file.
**
** C-preprocessor macro summary:
**
**    HAVE_MALLOC_USABLE_SIZE     The configure script sets this symbol if
**                                the malloc_usable_size() interface exists
**                                on the target platform.  Or, this symbol
**                                can be set manually, if desired.
**                                If an equivalent interface exists by
**                                a different name, using a separate -D
**                                option to rename it.
**
**    SQLITE_WITHOUT_ZONEMALLOC   Some older macs lack support for the zone
**                                memory allocator.  Set this symbol to enable
**                                building on older macs.
**
**    SQLITE_WITHOUT_MSIZE        Set this symbol to disable the use of
**                                _msize() on windows systems.  This might
**                                be necessary when compiling for Delphi,
**                                for example.
*/

/*
** This version of the memory allocator is the default.  It is
** used when no other memory allocator is specified using compile-time
** macros.
*/
#ifdef SQLITE_SYSTEM_MALLOC

/*
** The MSVCRT has malloc_usable_size() but it is called _msize().
** The use of _msize() is automatic, but can be disabled by compiling
** with -DSQLITE_WITHOUT_MSIZE
*/
#if defined(_MSC_VER) && !defined(SQLITE_WITHOUT_MSIZE)
# define SQLITE_MALLOCSIZE _msize

#endif

#if defined(__APPLE__) && !defined(SQLITE_WITHOUT_ZONEMALLOC)

/*
** Use the zone allocator available on apple products unless the
** SQLITE_WITHOUT_ZONEMALLOC symbol is defined.
*/
#include <sys/sysctl.h>
#include <malloc/malloc.h>
#include <libkern/OSAtomic.h>
static malloc_zone_t* _sqliteZone_;
#define SQLITE_MALLOC(x) malloc_zone_malloc(_sqliteZone_, (x))
#define SQLITE_FREE(x) malloc_zone_free(_sqliteZone_, (x));
#define SQLITE_REALLOC(x,y) malloc_zone_realloc(_sqliteZone_, (x), (y))
#define SQLITE_MALLOCSIZE(x) \
        (_sqliteZone_ ? _sqliteZone_->size(_sqliteZone_,x) : malloc_size(x))

#else /* if not __APPLE__ */

/*
** Use standard C library malloc and free on non-Apple systems.  
** Also used by Apple systems if SQLITE_WITHOUT_ZONEMALLOC is defined.
*/
#define SQLITE_MALLOC(x)    malloc(x)
#define SQLITE_FREE(x)      free(x)
#define SQLITE_REALLOC(x,y) realloc((x),(y))

#if (defined(_MSC_VER) && !defined(SQLITE_WITHOUT_MSIZE)) \
      || (defined(HAVE_MALLOC_H) && defined(HAVE_MALLOC_USABLE_SIZE))
# include <malloc.h>    /* Needed for malloc_usable_size on linux */
#endif
#ifdef HAVE_MALLOC_USABLE_SIZE

# ifndef SQLITE_MALLOCSIZE
#  define SQLITE_MALLOCSIZE(x) malloc_usable_size(x)
# endif
#else
# undef SQLITE_MALLOCSIZE
#endif

#endif /* __APPLE__ or not __APPLE__ */

/*
** Like malloc(), but remember the size of the allocation
** so that we can find it later using sqlite3MemSize().

  return ROUND8(n);
}

/*
** Initialize this module.
*/
static int sqlite3MemInit(void *NotUsed){
#if defined(__APPLE__) && !defined(SQLITE_WITHOUT_ZONEMALLOC)
  int cpuCount;
  size_t len;
  if( _sqliteZone_ ){
    return SQLITE_OK;
  }
  len = sizeof(cpuCount);
  /* One usually wants to use hw.acctivecpu for MT decisions, but not here */

/* Convenient short-hand */
#define UpperToLower sqlite3UpperToLower

/*
** Some systems have stricmp().  Others have strcasecmp().  Because
** there is no consistency, we will define our own.
**
** IMPLEMENTATION-OF: R-30243-02494 The sqlite3_stricmp() and
** sqlite3_strnicmp() APIs allow applications and extensions to compare
** the contents of two buffers containing UTF-8 strings in a
** case-independent fashion, using the same definition of "case
** independence" that SQLite uses internally when comparing identifiers.

*/
SQLITE_API int sqlite3_stricmp(const char *zLeft, const char *zRight){
  register unsigned char *a, *b;
  a = (unsigned char *)zLeft;
  b = (unsigned char *)zRight;
  while( *a!=0 && UpperToLower[*a]==UpperToLower[*b]){ a++; b++; }
  return UpperToLower[*a] - UpperToLower[*b];
}
SQLITE_API int sqlite3_strnicmp(const char *zLeft, const char *zRight, int N){

typedef struct unixFile unixFile;
struct unixFile {
  sqlite3_io_methods const *pMethod;  /* Always the first entry */
  sqlite3_vfs *pVfs;                  /* The VFS that created this unixFile */
  unixInodeInfo *pInode;              /* Info about locks on this inode */
  int h;                              /* The file descriptor */
  unsigned char eFileLock;            /* The type of lock held on this fd */
  unsigned short int ctrlFlags;       /* Behavioral bits.  UNIXFILE_* flags */
  int lastErrno;                      /* The unix errno from last I/O error */
  void *lockingContext;               /* Locking style specific state */
  UnixUnusedFd *pUnused;              /* Pre-allocated UnixUnusedFd */
  const char *zPath;                  /* Name of the file */
  unixShm *pShm;                      /* Shared memory segment information */
  int szChunk;                        /* Configured by FCNTL_CHUNK_SIZE */
#if SQLITE_ENABLE_LOCKING_STYLE

#else
# define UNIXFILE_DIRSYNC    0x00
#endif
#define UNIXFILE_PSOW        0x10     /* SQLITE_IOCAP_POWERSAFE_OVERWRITE */
#define UNIXFILE_DELETE      0x20     /* Delete on close */
#define UNIXFILE_URI         0x40     /* Filename might have query parameters */
#define UNIXFILE_NOLOCK      0x80     /* Do no file locking */
#define UNIXFILE_CHOWN      0x100     /* File ownership was changed */

/*
** Include code that is common to all os_*.c files
*/
/************** Include os_common.h in the middle of os_unix.c ***************/
/************** Begin file os_common.h ***************************************/
/*

  { "mkdir",        (sqlite3_syscall_ptr)mkdir,           0 },
#define osMkdir     ((int(*)(const char*,mode_t))aSyscall[18].pCurrent)

  { "rmdir",        (sqlite3_syscall_ptr)rmdir,           0 },
#define osRmdir     ((int(*)(const char*))aSyscall[19].pCurrent)

  { "fchown",       (sqlite3_syscall_ptr)fchown,          0 },
#define osFchown    ((int(*)(int,uid_t,gid_t))aSyscall[20].pCurrent)

  { "umask",        (sqlite3_syscall_ptr)umask,           0 },
#define osUmask     ((mode_t(*)(mode_t))aSyscall[21].pCurrent)

}; /* End of the overrideable system calls */

/*
** This is the xSetSystemCall() method of sqlite3_vfs for all of the
** "unix" VFSes.  Return SQLITE_OK opon successfully updating the
** system call pointer, or SQLITE_NOTFOUND if there is no configurable
** system call named zName.

  for(i++; i<ArraySize(aSyscall); i++){
    if( aSyscall[i].pCurrent!=0 ) return aSyscall[i].zName;
  }
  return 0;
}

/*
** Invoke open().  Do so multiple times, until it either succeeds or
** files for some reason other than EINTR.
**
** If the file creation mode "m" is 0 then set it to the default for
** SQLite.  The default is SQLITE_DEFAULT_FILE_PERMISSIONS (normally
** 0644) as modified by the system umask.  If m is not 0, then
** make the file creation mode be exactly m ignoring the umask.
**
** The m parameter will be non-zero only when creating -wal, -journal,
** and -shm files.  We want those files to have *exactly* the same
** permissions as their original database, unadulterated by the umask.
** In that way, if a database file is -rw-rw-rw or -rw-rw-r-, and a
** transaction crashes and leaves behind hot journals, then any
** process that is able to write to the database will also be able to
** recover the hot journals.
*/
static int robust_open(const char *z, int f, mode_t m){
  int rc;
  mode_t m2;
  mode_t origM = 0;
  if( m==0 ){
    m2 = SQLITE_DEFAULT_FILE_PERMISSIONS;
  }else{
    m2 = m;
    origM = osUmask(0);
  }
  do{ rc = osOpen(z,f,m2); }while( rc<0 && errno==EINTR );
  if( m ){
    osUmask(origM);
  }
  return rc;
}

/*
** Helper functions to obtain and relinquish the global mutex. The
** global mutex is used to protect the unixInodeInfo and
** vxworksFileId objects used by this file, all of which may be 

  pInode = pDbFd->pInode;
  pShmNode = pInode->pShmNode;
  if( pShmNode==0 ){
    struct stat sStat;                 /* fstat() info for database file */

    /* Call fstat() to figure out the permissions on the database file. If
    ** a new *-shm file is created, an attempt will be made to create it
    ** with the same permissions.

    */
    if( osFstat(pDbFd->h, &sStat) && pInode->bProcessLock==0 ){
      rc = SQLITE_IOERR_FSTAT;
      goto shm_open_err;
    }

#ifdef SQLITE_SHM_DIRECTORY

      int openFlags = O_RDWR | O_CREAT;
      if( sqlite3_uri_boolean(pDbFd->zPath, "readonly_shm", 0) ){
        openFlags = O_RDONLY;
        pShmNode->isReadonly = 1;
      }
      pShmNode->h = robust_open(zShmFilename, openFlags, (sStat.st_mode&0777));
      if( pShmNode->h<0 ){

        rc = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zShmFilename);
        goto shm_open_err;
      }

      /* If this process is running as root, make sure that the SHM file
      ** is owned by the same user that owns the original database.  Otherwise,
      ** the original owner will not be able to connect. If this process is
      ** not root, the following fchown() will fail, but we don't care.  The
      ** if(){..} and the UNIXFILE_CHOWN flag are purely to silence compiler
      ** warnings.
      */
      if( osFchown(pShmNode->h, sStat.st_uid, sStat.st_gid)==0 ){
        pDbFd->ctrlFlags |= UNIXFILE_CHOWN;
      }
  
      /* Check to see if another process is holding the dead-man switch.
      ** If not, truncate the file to zero length. 
      */
      rc = SQLITE_OK;
      if( unixShmSystemLock(pShmNode, F_WRLCK, UNIX_SHM_DMS, 1)==SQLITE_OK ){

/*
** This function is called by unixOpen() to determine the unix permissions
** to create new files with. If no error occurs, then SQLITE_OK is returned
** and a value suitable for passing as the third argument to open(2) is
** written to *pMode. If an IO error occurs, an SQLite error code is 
** returned and the value of *pMode is not modified.
**
** In most cases cases, this routine sets *pMode to 0, which will become
** an indication to robust_open() to create the file using

** SQLITE_DEFAULT_FILE_PERMISSIONS adjusted by the umask.

** But if the file being opened is a WAL or regular journal file, then 
** this function queries the file-system for the permissions on the 
** corresponding database file and sets *pMode to this value. Whenever 
** possible, WAL and journal files are created using the same permissions 
** as the associated database file.
**
** If the SQLITE_ENABLE_8_3_NAMES option is enabled, then the
** original filename is unavailable.  But 8_3_NAMES is only used for
** FAT filesystems and permissions do not matter there, so just use
** the default permissions.
*/
static int findCreateFileMode(
  const char *zPath,              /* Path of file (possibly) being created */
  int flags,                      /* Flags passed as 4th argument to xOpen() */
  mode_t *pMode,                  /* OUT: Permissions to open file with */
  uid_t *pUid,                    /* OUT: uid to set on the file */
  gid_t *pGid                     /* OUT: gid to set on the file */
){
  int rc = SQLITE_OK;             /* Return Code */
  *pMode = 0;
  *pUid = 0;
  *pGid = 0;
  if( flags & (SQLITE_OPEN_WAL|SQLITE_OPEN_MAIN_JOURNAL) ){
    char zDb[MAX_PATHNAME+1];     /* Database file path */
    int nDb;                      /* Number of valid bytes in zDb */
    struct stat sStat;            /* Output of stat() on database file */

    /* zPath is a path to a WAL or journal file. The following block derives
    ** the path to the associated database file from zPath. This block handles

    }
#endif
    memcpy(zDb, zPath, nDb);
    zDb[nDb] = '\0';

    if( 0==osStat(zDb, &sStat) ){
      *pMode = sStat.st_mode & 0777;
      *pUid = sStat.st_uid;
      *pGid = sStat.st_gid;
    }else{
      rc = SQLITE_IOERR_FSTAT;
    }
  }else if( flags & SQLITE_OPEN_DELETEONCLOSE ){
    *pMode = 0600;
  }
  return rc;

  if( isReadWrite ) openFlags |= O_RDWR;
  if( isCreate )    openFlags |= O_CREAT;
  if( isExclusive ) openFlags |= (O_EXCL|O_NOFOLLOW);
  openFlags |= (O_LARGEFILE|O_BINARY);

  if( fd<0 ){
    mode_t openMode;              /* Permissions to create file with */
    uid_t uid;                    /* Userid for the file */
    gid_t gid;                    /* Groupid for the file */
    rc = findCreateFileMode(zName, flags, &openMode, &uid, &gid);
    if( rc!=SQLITE_OK ){
      assert( !p->pUnused );
      assert( eType==SQLITE_OPEN_WAL || eType==SQLITE_OPEN_MAIN_JOURNAL );
      return rc;
    }
    fd = robust_open(zName, openFlags, openMode);
    OSTRACE(("OPENX   %-3d %s 0%o\n", fd, zName, openFlags));
    if( fd<0 && errno!=EISDIR && isReadWrite && !isExclusive ){
      /* Failed to open the file for read/write access. Try read-only. */
      flags &= ~(SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE);
      openFlags &= ~(O_RDWR|O_CREAT);
      flags |= SQLITE_OPEN_READONLY;
      openFlags |= O_RDONLY;
      isReadonly = 1;
      fd = robust_open(zName, openFlags, openMode);
    }
    if( fd<0 ){
      rc = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zName);
      goto open_finished;
    }

    /* If this process is running as root and if creating a new rollback
    ** journal or WAL file, set the ownership of the journal or WAL to be
    ** the same as the original database.  If we are not running as root,
    ** then the fchown() call will fail, but that's ok.  The "if(){}" and
    ** the setting of the UNIXFILE_CHOWN flag are purely to silence compiler
    ** warnings from gcc.
    */
    if( flags & (SQLITE_OPEN_WAL|SQLITE_OPEN_MAIN_JOURNAL) ){
      if( osFchown(fd, uid, gid)==0 ){ p->ctrlFlags |= UNIXFILE_CHOWN; }
    }
  }
  assert( fd>=0 );
  if( pOutFlags ){
    *pOutFlags = flags;
  }

  if( p->pUnused ){

  ** When testing, initializing zBuf[] to zero is all we do.  That means
  ** that we always use the same random number sequence.  This makes the
  ** tests repeatable.
  */
  memset(zBuf, 0, nBuf);
#if !defined(SQLITE_TEST)
  {
    int pid, fd, got;
    fd = robust_open("/dev/urandom", O_RDONLY, 0);
    if( fd<0 ){
      time_t t;
      time(&t);
      memcpy(zBuf, &t, sizeof(t));
      pid = getpid();
      memcpy(&zBuf[sizeof(t)], &pid, sizeof(pid));
      assert( sizeof(t)+sizeof(pid)<=(size_t)nBuf );
      nBuf = sizeof(t) + sizeof(pid);
    }else{
      do{ got = osRead(fd, zBuf, nBuf); }while( got<0 && errno==EINTR );
      robust_close(0, fd, __LINE__);
    }
  }
#endif
  return nBuf;
}

  }else{
    pUnused = sqlite3_malloc(sizeof(*pUnused));
    if( !pUnused ){
      return SQLITE_NOMEM;
    }
  }
  if( fd<0 ){
    fd = robust_open(path, openFlags, 0);
    terrno = errno;
    if( fd<0 && errno==ENOENT && islockfile ){
      if( proxyCreateLockPath(path) == SQLITE_OK ){
        fd = robust_open(path, openFlags, 0);
      }
    }
  }
  if( fd<0 ){
    openFlags = O_RDONLY;
    fd = robust_open(path, openFlags, 0);
    terrno = errno;
  }
  if( fd<0 ){
    if( islockfile ){
      return SQLITE_BUSY;
    }
    switch (terrno) {

  /* read the conch content */
  readLen = osPread(conchFile->h, buf, PROXY_MAXCONCHLEN, 0);
  if( readLen<PROXY_PATHINDEX ){
    sqlite3_snprintf(sizeof(errmsg),errmsg,"read error (len %d)",(int)readLen);
    goto end_breaklock;
  }
  /* write it out to the temporary break file */
  fd = robust_open(tPath, (O_RDWR|O_CREAT|O_EXCL), 0);

  if( fd<0 ){
    sqlite3_snprintf(sizeof(errmsg), errmsg, "create failed (%d)", errno);
    goto end_breaklock;
  }
  if( osPwrite(fd, buf, readLen, 0) != (ssize_t)readLen ){
    sqlite3_snprintf(sizeof(errmsg), errmsg, "write failed (%d)", errno);
    goto end_breaklock;

      OSTRACE(("TRANSPROXY: CLOSE  %d\n", pFile->h));
      if( rc==SQLITE_OK && pFile->openFlags ){
        int fd;
        if( pFile->h>=0 ){
          robust_close(pFile, pFile->h, __LINE__);
        }
        pFile->h = -1;
        fd = robust_open(pCtx->dbPath, pFile->openFlags, 0);

        OSTRACE(("TRANSPROXY: OPEN  %d\n", fd));
        if( fd>=0 ){
          pFile->h = fd;
        }else{
          rc=SQLITE_CANTOPEN_BKPT; /* SQLITE_BUSY? proxyTakeConch called
           during locking */
        }

    UNIXVFS("unix-proxy",    proxyIoFinder ),
#endif
  };
  unsigned int i;          /* Loop counter */

  /* Double-check that the aSyscall[] array has been constructed
  ** correctly.  See ticket [bb3a86e890c8e96ab] */
  assert( ArraySize(aSyscall)==22 );

  /* Register all VFSes defined in the aVfs[] array */
  for(i=0; i<(sizeof(aVfs)/sizeof(sqlite3_vfs)); i++){
    sqlite3_vfs_register(&aVfs[i], i==0);
  }
  return SQLITE_OK; 
}

  PGroup *pGroup;                     /* PGroup this cache belongs to */
  int szPage;                         /* Size of allocated pages in bytes */
  int szExtra;                        /* Size of extra space in bytes */
  int bPurgeable;                     /* True if cache is purgeable */
  unsigned int nMin;                  /* Minimum number of pages reserved */
  unsigned int nMax;                  /* Configured "cache_size" value */
  unsigned int n90pct;                /* nMax*9/10 */
  unsigned int iMaxKey;               /* Largest key seen since xTruncate() */

  /* Hash table of all pages. The following variables may only be accessed
  ** when the accessor is holding the PGroup mutex.
  */
  unsigned int nRecyclable;           /* Number of pages in the LRU list */
  unsigned int nPage;                 /* Total number of pages in apHash */
  unsigned int nHash;                 /* Number of slots in apHash[] */
  PgHdr1 **apHash;                    /* Hash table for fast lookup by key */


};

/*
** Each cache entry is represented by an instance of the following 
** structure. Unless SQLITE_PCACHE_SEPARATE_HEADER is defined, a buffer of
** PgHdr1.pCache->szPage bytes is allocated directly before this structure 
** in memory.

  int isInit;                    /* True if initialized */
  int szSlot;                    /* Size of each free slot */
  int nSlot;                     /* The number of pcache slots */
  int nReserve;                  /* Try to keep nFreeSlot above this */
  void *pStart, *pEnd;           /* Bounds of pagecache malloc range */
  /* Above requires no mutex.  Use mutex below for variable that follow. */
  sqlite3_mutex *mutex;          /* Mutex for accessing the following: */

  PgFreeslot *pFree;             /* Free page blocks */
  int nFreeSlot;                 /* Number of unused pcache slots */
  /* The following value requires a mutex to change.  We skip the mutex on
  ** reading because (1) most platforms read a 32-bit integer atomically and
  ** (2) even if an incorrect value is read, no great harm is done since this
  ** is really just an optimization. */
  int bUnderPressure;            /* True if low on PAGECACHE memory */
} pcache1_g;

# define sqlite3WalSavepoint(y,z)
# define sqlite3WalSavepointUndo(y,z)            0
# define sqlite3WalFrames(u,v,w,x,y,z)           0
# define sqlite3WalCheckpoint(r,s,t,u,v,w,x,y,z) 0
# define sqlite3WalCallback(z)                   0
# define sqlite3WalExclusiveMode(y,z)            0
# define sqlite3WalHeapMemory(z)                 0
# define sqlite3WalFramesize(z)                  0
#else

#define WAL_SAVEPOINT_NDATA 4

/* Connection to a write-ahead log (WAL) file. 
** There is one object of this type for each pager. 
*/

SQLITE_PRIVATE int sqlite3WalExclusiveMode(Wal *pWal, int op);

/* Return true if the argument is non-NULL and the WAL module is using
** heap-memory for the wal-index. Otherwise, if the argument is NULL or the
** WAL module is using shared-memory, return false. 
*/
SQLITE_PRIVATE int sqlite3WalHeapMemory(Wal *pWal);

#ifdef SQLITE_ENABLE_ZIPVFS
/* If the WAL file is not empty, return the number of bytes of content
** stored in each frame (i.e. the db page-size when the WAL was created).
*/
SQLITE_PRIVATE int sqlite3WalFramesize(Wal *pWal);
#endif

#endif /* ifndef SQLITE_OMIT_WAL */
#endif /* _WAL_H_ */

/************** End of wal.h *************************************************/
/************** Continuing where we left off in pager.c **********************/

**   sub-codes.
*/
struct Pager {
  sqlite3_vfs *pVfs;          /* OS functions to use for IO */
  u8 exclusiveMode;           /* Boolean. True if locking_mode==EXCLUSIVE */
  u8 journalMode;             /* One of the PAGER_JOURNALMODE_* values */
  u8 useJournal;              /* Use a rollback journal on this file */

  u8 noSync;                  /* Do not sync the journal if true */
  u8 fullSync;                /* Do extra syncs of the journal for robustness */
  u8 ckptSyncFlags;           /* SYNC_NORMAL or SYNC_FULL for checkpoint */
  u8 walSyncFlags;            /* SYNC_NORMAL or SYNC_FULL for wal writes */
  u8 syncFlags;               /* SYNC_NORMAL or SYNC_FULL otherwise */
  u8 tempFile;                /* zFilename is a temporary file */
  u8 readOnly;                /* True for a read-only database */

      assert( pPager->errCode==SQLITE_OK );
      assert( sqlite3PcacheRefCount(pPager->pPCache)==0 || pPager->tempFile );
      break;

    case PAGER_READER:
      assert( pPager->errCode==SQLITE_OK );
      assert( p->eLock!=UNKNOWN_LOCK );
      assert( p->eLock>=SHARED_LOCK );
      break;

    case PAGER_WRITER_LOCKED:
      assert( p->eLock!=UNKNOWN_LOCK );
      assert( pPager->errCode==SQLITE_OK );
      if( !pagerUseWal(pPager) ){
        assert( p->eLock>=RESERVED_LOCK );

  /* Query the WAL sub-system for the database size. The WalDbsize()
  ** function returns zero if the WAL is not open (i.e. Pager.pWal==0), or
  ** if the database size is not available. The database size is not
  ** available from the WAL sub-system if the log file is empty or
  ** contains no valid committed transactions.
  */
  assert( pPager->eState==PAGER_OPEN );
  assert( pPager->eLock>=SHARED_LOCK );
  nPage = sqlite3WalDbsize(pPager->pWal);

  /* If the database size was not available from the WAL sub-system,
  ** determine it based on the size of the database file. If the size
  ** of the database file is not an integer multiple of the page-size,
  ** round down to the nearest page. Except, any file larger than 0
  ** bytes in size is considered to contain at least one page.

** a WAL on a none-empty database, this ensures there is no race condition 
** between the xAccess() below and an xDelete() being executed by some 
** other connection.
*/
static int pagerOpenWalIfPresent(Pager *pPager){
  int rc = SQLITE_OK;
  assert( pPager->eState==PAGER_OPEN );
  assert( pPager->eLock>=SHARED_LOCK );

  if( !pPager->tempFile ){
    int isWal;                    /* True if WAL file exists */
    Pgno nPage;                   /* Size of the database file */

    rc = pagerPagecount(pPager, &nPage);
    if( rc ) return rc;

**
** The nExtra parameter specifies the number of bytes of space allocated
** along with each page reference. This space is available to the user
** via the sqlite3PagerGetExtra() API.
**
** The flags argument is used to specify properties that affect the
** operation of the pager. It should be passed some bitwise combination
** of the PAGER_* flags.
**
** The vfsFlags parameter is a bitmask to pass to the flags parameter
** of the xOpen() method of the supplied VFS when opening files. 
**
** If the pager object is allocated and the specified file opened 
** successfully, SQLITE_OK is returned and *ppPager set to point to
** the new pager object. If an error occurs, *ppPager is set to NULL

  int tempFile = 0;        /* True for temp files (incl. in-memory files) */
  int memDb = 0;           /* True if this is an in-memory file */
  int readOnly = 0;        /* True if this is a read-only file */
  int journalFileSize;     /* Bytes to allocate for each journal fd */
  char *zPathname = 0;     /* Full path to database file */
  int nPathname = 0;       /* Number of bytes in zPathname */
  int useJournal = (flags & PAGER_OMIT_JOURNAL)==0; /* False to omit journal */

  int pcacheSize = sqlite3PcacheSize();       /* Bytes to allocate for PCache */
  u32 szPageDflt = SQLITE_DEFAULT_PAGE_SIZE;  /* Default page size */
  const char *zUri = 0;    /* URI args to copy */
  int nUri = 0;            /* Number of bytes of URI args at *zUri */

  /* Figure out how much space is required for each journal file-handle
  ** (there are two of them, the main journal and the sub-journal). This

  sqlite3PcacheOpen(szPageDflt, nExtra, !memDb,
                    !memDb?pagerStress:0, (void *)pPager, pPager->pPCache);

  PAGERTRACE(("OPEN %d %s\n", FILEHANDLEID(pPager->fd), pPager->zFilename));
  IOTRACE(("OPEN %p %s\n", pPager, pPager->zFilename))

  pPager->useJournal = (u8)useJournal;

  /* pPager->stmtOpen = 0; */
  /* pPager->stmtInUse = 0; */
  /* pPager->nRef = 0; */
  /* pPager->stmtSize = 0; */
  /* pPager->stmtJSize = 0; */
  /* pPager->nPage = 0; */
  pPager->mxPgno = SQLITE_MAX_PAGE_COUNT;

  assert( pPager->eState==PAGER_OPEN || pPager->eState==PAGER_READER );
  if( NEVER(MEMDB && pPager->errCode) ){ return pPager->errCode; }

  if( !pagerUseWal(pPager) && pPager->eState==PAGER_OPEN ){
    int bHotJournal = 1;          /* True if there exists a hot journal-file */

    assert( !MEMDB );



    rc = pager_wait_on_lock(pPager, SHARED_LOCK);
    if( rc!=SQLITE_OK ){
      assert( pPager->eLock==NO_LOCK || pPager->eLock==UNKNOWN_LOCK );
      goto failed;

    }

    /* If a journal file exists, and there is no RESERVED lock on the
    ** database file, then it either needs to be played back or deleted.
    */
    if( pPager->eLock<=SHARED_LOCK ){
      rc = hasHotJournal(pPager, &bHotJournal);

** lock on the database file and use heap-memory to store the wal-index
** in. Otherwise, use the normal shared-memory.
*/
static int pagerOpenWal(Pager *pPager){
  int rc = SQLITE_OK;

  assert( pPager->pWal==0 && pPager->tempFile==0 );
  assert( pPager->eLock==SHARED_LOCK || pPager->eLock==EXCLUSIVE_LOCK );

  /* If the pager is already in exclusive-mode, the WAL module will use 
  ** heap-memory for the wal-index instead of the VFS shared-memory 
  ** implementation. Take the exclusive lock now, before opening the WAL
  ** file, to make sure this is safe.
  */
  if( pPager->exclusiveMode ){

      rc = sqlite3WalClose(pPager->pWal, pPager->ckptSyncFlags,
                           pPager->pageSize, (u8*)pPager->pTmpSpace);
      pPager->pWal = 0;
    }
  }
  return rc;
}

#ifdef SQLITE_ENABLE_ZIPVFS
/*
** A read-lock must be held on the pager when this function is called. If
** the pager is in WAL mode and the WAL file currently contains one or more
** frames, return the size in bytes of the page images stored within the
** WAL frames. Otherwise, if this is not a WAL database or the WAL file
** is empty, return 0.
*/
SQLITE_PRIVATE int sqlite3PagerWalFramesize(Pager *pPager){
  assert( pPager->eState==PAGER_READER );
  return sqlite3WalFramesize(pPager->pWal);
}
#endif

#ifdef SQLITE_HAS_CODEC
/*
** This function is called by the wal module when writing page content
** into the log file.
**
** This function returns a pointer to a buffer containing the encrypted

    sz = pWal->hdr.szPage;
    sz = (sz&0xfe00) + ((sz&0x0001)<<16);
    testcase( sz<=32768 );
    testcase( sz>=65536 );
    iOffset = walFrameOffset(iRead, sz) + WAL_FRAME_HDRSIZE;
    *pInWal = 1;
    /* testcase( IS_BIG_INT(iOffset) ); // requires a 4GiB WAL */
    return sqlite3OsRead(pWal->pWalFd, pOut, (nOut>sz ? sz : nOut), iOffset);
  }

  *pInWal = 0;
  return SQLITE_OK;
}

** Return true if the argument is non-NULL and the WAL module is using
** heap-memory for the wal-index. Otherwise, if the argument is NULL or the
** WAL module is using shared-memory, return false. 
*/
SQLITE_PRIVATE int sqlite3WalHeapMemory(Wal *pWal){
  return (pWal && pWal->exclusiveMode==WAL_HEAPMEMORY_MODE );
}

#ifdef SQLITE_ENABLE_ZIPVFS
/*
** If the argument is not NULL, it points to a Wal object that holds a
** read-lock. This function returns the database page-size if it is known,
** or zero if it is not (or if pWal is NULL).
*/
SQLITE_PRIVATE int sqlite3WalFramesize(Wal *pWal){
  assert( pWal==0 || pWal->readLock>=0 );
  return (pWal ? pWal->szPage : 0);
}
#endif

#endif /* #ifndef SQLITE_OMIT_WAL */

/************** End of wal.c *************************************************/
/************** Begin file btmutex.c *****************************************/
/*
** 2007 August 27

  u8 max1bytePayload;  /* min(maxLocal,127) */
  u16 maxLocal;        /* Copy of BtShared.maxLocal or BtShared.maxLeaf */
  u16 minLocal;        /* Copy of BtShared.minLocal or BtShared.minLeaf */
  u16 cellOffset;      /* Index in aData of first cell pointer */
  u16 nFree;           /* Number of free bytes on the page */
  u16 nCell;           /* Number of cells on this page, local and ovfl */
  u16 maskPage;        /* Mask for page offset */

  u16 aiOvfl[5];       /* Insert the i-th overflow cell before the aiOvfl-th
                       ** non-overflow cell */
  u8 *apOvfl[5];       /* Pointers to the body of overflow cells */
  BtShared *pBt;       /* Pointer to BtShared that this page is part of */
  u8 *aData;           /* Pointer to disk image of the page data */
  u8 *aDataEnd;        /* One byte past the end of usable data */
  u8 *aCellIdx;        /* The cell index area */
  DbPage *pDbPage;     /* Pager page handle */
  Pgno pgno;           /* Page number for this page */
};

** found at self->pBt->mutex. 
*/
struct BtCursor {
  Btree *pBtree;            /* The Btree to which this cursor belongs */
  BtShared *pBt;            /* The BtShared this cursor points to */
  BtCursor *pNext, *pPrev;  /* Forms a linked list of all cursors */
  struct KeyInfo *pKeyInfo; /* Argument passed to comparison function */
#ifndef SQLITE_OMIT_INCRBLOB
  Pgno *aOverflow;          /* Cache of overflow page locations */
#endif
  Pgno pgnoRoot;            /* The root page of this tree */
  sqlite3_int64 cachedRowid; /* Next rowid cache.  0 means not valid */
  CellInfo info;            /* A parse of the cell we are pointing at */
  i64 nKey;        /* Size of pKey, or last integer key */
  void *pKey;      /* Saved key that was cursor's last known position */
  int skipNext;    /* Prev() is noop if negative. Next() is noop if positive */
  u8 wrFlag;                /* True if writable */
  u8 atLast;                /* Cursor pointing to the last entry */
  u8 validNKey;             /* True if info.nKey is valid */
  u8 eState;                /* One of the CURSOR_XXX constants (see below) */
#ifndef SQLITE_OMIT_INCRBLOB

  u8 isIncrblobHandle;      /* True if this cursor is an incr. io handle */
#endif
  i16 iPage;                            /* Index of current page in apPage */
  u16 aiIdx[BTCURSOR_MAX_DEPTH];        /* Current index in apPage[i] */
  MemPage *apPage[BTCURSOR_MAX_DEPTH];  /* Pages from root to current page */
};

** This structure is passed around through all the sanity checking routines
** in order to keep track of some global state information.
*/
typedef struct IntegrityCk IntegrityCk;
struct IntegrityCk {
  BtShared *pBt;    /* The tree being checked out */
  Pager *pPager;    /* The associated pager.  Also accessible by pBt->pPager */

  int *anRef;       /* Number of times each page is referenced */
  Pgno nPage;       /* Number of pages in the database */
  int mxErr;        /* Stop accumulating errors when this reaches zero */
  int nErr;         /* Number of messages written to zErrMsg so far */
  int mallocFailed; /* A memory allocation error has occurred */
  StrAccum errMsg;  /* Accumulate the error message text here */
};

/*

** pages that do contain overflow cells.
*/
static u8 *findOverflowCell(MemPage *pPage, int iCell){
  int i;
  assert( sqlite3_mutex_held(pPage->pBt->mutex) );
  for(i=pPage->nOverflow-1; i>=0; i--){
    int k;

    k = pPage->aiOvfl[i];

    if( k<=iCell ){
      if( k==iCell ){
        return pPage->apOvfl[i];
      }
      iCell--;
    }
  }
  return findCell(pPage, iCell);
}

** be exclusively in memory, or it might use a disk-based memory cache.
** Either way, the ephemeral database will be automatically deleted 
** when sqlite3BtreeClose() is called.
**
** If zFilename is ":memory:" then an in-memory database is created
** that is automatically destroyed when it is closed.
**
** The "flags" parameter is a bitmask that might contain bits like
** BTREE_OMIT_JOURNAL and/or BTREE_MEMORY.



**
** If the database is already opened in the same database connection
** and we are in shared cache mode, then the open will fail with an
** SQLITE_CONSTRAINT error.  We cannot allow two or more BtShared
** objects in the same database connection since doing so will lead
** to problems with locking.
*/

  /* Only a BTREE_SINGLE database can be BTREE_UNORDERED */
  assert( (flags & BTREE_UNORDERED)==0 || (flags & BTREE_SINGLE)!=0 );

  /* A BTREE_SINGLE database is always a temporary and/or ephemeral */
  assert( (flags & BTREE_SINGLE)==0 || isTempDb );




  if( isMemdb ){
    flags |= BTREE_MEMORY;
  }
  if( (vfsFlags & SQLITE_OPEN_MAIN_DB)!=0 && (isMemdb || isTempDb) ){
    vfsFlags = (vfsFlags & ~SQLITE_OPEN_MAIN_DB) | SQLITE_OPEN_TEMP_DB;
  }
  p = sqlite3MallocZero(sizeof(Btree));

    }
  }

  /* Rollback any active transaction and free the handle structure.
  ** The call to sqlite3BtreeRollback() drops any table-locks held by
  ** this handle.
  */
  sqlite3BtreeRollback(p, SQLITE_OK);
  sqlite3BtreeLeave(p);

  /* If there are still other outstanding references to the shared-btree
  ** structure, return now. The remainder of this procedure cleans 
  ** up the shared-btree.
  */
  assert( p->wantToLock==0 && p->locked==0 );

** the rollback.  The rollback may have deleted tables
** or moved root pages, so it is not sufficient to
** save the state of the cursor.  The cursor must be
** invalidated.
*/
SQLITE_PRIVATE void sqlite3BtreeTripAllCursors(Btree *pBtree, int errCode){
  BtCursor *p;
  if( pBtree==0 ) return;
  sqlite3BtreeEnter(pBtree);
  for(p=pBtree->pBt->pCursor; p; p=p->pNext){
    int i;
    sqlite3BtreeClearCursor(p);
    p->eState = CURSOR_FAULT;
    p->skipNext = errCode;
    for(i=0; i<=p->iPage; i++){

** invalided by this operation.  Any attempt to use a cursor
** that was open at the beginning of this operation will result
** in an error.
**
** This will release the write lock on the database file.  If there
** are no active cursors, it also releases the read lock.
*/
SQLITE_PRIVATE int sqlite3BtreeRollback(Btree *p, int tripCode){
  int rc;
  BtShared *pBt = p->pBt;
  MemPage *pPage1;

  sqlite3BtreeEnter(p);
  if( tripCode==SQLITE_OK ){
    rc = tripCode = saveAllCursors(pBt, 0, 0);
  }else{
    rc = SQLITE_OK;
  }
  if( tripCode ){







    sqlite3BtreeTripAllCursors(p, tripCode);
  }

  btreeIntegrity(p);

  if( p->inTrans==TRANS_WRITE ){
    int rc2;

    assert( TRANS_WRITE==pBt->inTransaction );
    rc2 = sqlite3PagerRollback(pBt->pPager);

/*
** Insert a new cell on pPage at cell index "i".  pCell points to the
** content of the cell.
**
** If the cell content will fit on the page, then put it there.  If it
** will not fit, then make a copy of the cell content into pTemp if
** pTemp is not null.  Regardless of pTemp, allocate a new entry
** in pPage->apOvfl[] and make it point to the cell content (either
** in pTemp or the original pCell) and also record its index. 
** Allocating a new entry in pPage->aCell[] implies that 
** pPage->nOverflow is incremented.
**
** If nSkip is non-zero, then do not copy the first nSkip bytes of the
** cell. The caller will overwrite them after this function returns. If
** nSkip is non-zero, then pCell may not point to an invalid memory location 

  int nSkip = (iChild ? 4 : 0);

  if( *pRC ) return;

  assert( i>=0 && i<=pPage->nCell+pPage->nOverflow );
  assert( pPage->nCell<=MX_CELL(pPage->pBt) && MX_CELL(pPage->pBt)<=10921 );
  assert( pPage->nOverflow<=ArraySize(pPage->apOvfl) );
  assert( ArraySize(pPage->apOvfl)==ArraySize(pPage->aiOvfl) );
  assert( sqlite3_mutex_held(pPage->pBt->mutex) );
  /* The cell should normally be sized correctly.  However, when moving a
  ** malformed cell from a leaf page to an interior page, if the cell size
  ** wanted to be less than 4 but got rounded up to 4 on the leaf, then size
  ** might be less than 8 (leaf-size + pointer) on the interior node.  Hence
  ** the term after the || in the following assert(). */
  assert( sz==cellSizePtr(pPage, pCell) || (sz==8 && iChild>0) );
  if( pPage->nOverflow || sz+2>pPage->nFree ){
    if( pTemp ){
      memcpy(pTemp+nSkip, pCell+nSkip, sz-nSkip);
      pCell = pTemp;
    }
    if( iChild ){
      put4byte(pCell, iChild);
    }
    j = pPage->nOverflow++;
    assert( j<(int)(sizeof(pPage->apOvfl)/sizeof(pPage->apOvfl[0])) );
    pPage->apOvfl[j] = pCell;
    pPage->aiOvfl[j] = (u16)i;
  }else{
    int rc = sqlite3PagerWrite(pPage->pDbPage);
    if( rc!=SQLITE_OK ){
      *pRC = rc;
      return;
    }
    assert( sqlite3PagerIswriteable(pPage->pDbPage) );

  ** may be inserted. If both these operations are successful, proceed.
  */
  rc = allocateBtreePage(pBt, &pNew, &pgnoNew, 0, 0);

  if( rc==SQLITE_OK ){

    u8 *pOut = &pSpace[4];
    u8 *pCell = pPage->apOvfl[0];
    u16 szCell = cellSizePtr(pPage, pCell);
    u8 *pStop;

    assert( sqlite3PagerIswriteable(pNew->pDbPage) );
    assert( pPage->aData[0]==(PTF_INTKEY|PTF_LEAFDATA|PTF_LEAF) );
    zeroPage(pNew, PTF_INTKEY|PTF_LEAFDATA|PTF_LEAF);
    assemblePage(pNew, 1, &pCell, &szCell);

** on page pFrom to page pTo. If page pFrom was not a leaf page, then
** the pointer-map entries for each child page are updated so that the
** parent page stored in the pointer map is page pTo. If pFrom contained
** any cells with overflow page pointers, then the corresponding pointer
** map entries are also updated so that the parent page is page pTo.
**
** If pFrom is currently carrying any overflow cells (entries in the
** MemPage.apOvfl[] array), they are not copied to pTo. 
**
** Before returning, page pTo is reinitialized using btreeInitPage().
**
** The performance of this function is not critical. It is only used by 
** the balance_shallower() and balance_deeper() procedures, neither of
** which are called often under normal circumstances.
*/

  /* At this point pParent may have at most one overflow cell. And if
  ** this overflow cell is present, it must be the cell with 
  ** index iParentIdx. This scenario comes about when this function
  ** is called (indirectly) from sqlite3BtreeDelete().
  */
  assert( pParent->nOverflow==0 || pParent->nOverflow==1 );
  assert( pParent->nOverflow==0 || pParent->aiOvfl[0]==iParentIdx );

  if( !aOvflSpace ){
    return SQLITE_NOMEM;
  }

  /* Find the sibling pages to balance. Also locate the cells in pParent 
  ** that divide the siblings. An attempt is made to find NN siblings on 

    if( rc ){
      memset(apOld, 0, (i+1)*sizeof(MemPage*));
      goto balance_cleanup;
    }
    nMaxCells += 1+apOld[i]->nCell+apOld[i]->nOverflow;
    if( (i--)==0 ) break;

    if( i+nxDiv==pParent->aiOvfl[0] && pParent->nOverflow ){
      apDiv[i] = pParent->apOvfl[0];
      pgno = get4byte(apDiv[i]);
      szNew[i] = cellSizePtr(pParent, apDiv[i]);
      pParent->nOverflow = 0;
    }else{
      apDiv[i] = findCell(pParent, i+nxDiv-pParent->nOverflow);
      pgno = get4byte(apDiv[i]);
      szNew[i] = cellSizePtr(pParent, apDiv[i]);

    ** setting a pointer map entry is a relatively expensive operation, this
    ** code only sets pointer map entries for child or overflow pages that have
    ** actually moved between pages.  */
    MemPage *pNew = apNew[0];
    MemPage *pOld = apCopy[0];
    int nOverflow = pOld->nOverflow;
    int iNextOld = pOld->nCell + nOverflow;
    int iOverflow = (nOverflow ? pOld->aiOvfl[0] : -1);
    j = 0;                             /* Current 'old' sibling page */
    k = 0;                             /* Current 'new' sibling page */
    for(i=0; i<nCell; i++){
      int isDivider = 0;
      while( i==iNextOld ){
        /* Cell i is the cell immediately following the last cell on old
        ** sibling page j. If the siblings are not leaf pages of an
        ** intkey b-tree, then cell i was a divider cell. */
        assert( j+1 < ArraySize(apCopy) );
        pOld = apCopy[++j];
        iNextOld = i + !leafData + pOld->nCell + pOld->nOverflow;
        if( pOld->nOverflow ){
          nOverflow = pOld->nOverflow;
          iOverflow = i + !leafData + pOld->aiOvfl[0];
        }
        isDivider = !leafData;  
      }

      assert(nOverflow>0 || iOverflow<i );
      assert(nOverflow<2 || pOld->aiOvfl[0]==pOld->aiOvfl[1]-1);
      assert(nOverflow<3 || pOld->aiOvfl[1]==pOld->aiOvfl[2]-1);
      if( i==iOverflow ){
        isDivider = 1;
        if( (--nOverflow)>0 ){
          iOverflow++;
        }
      }

  assert( sqlite3PagerIswriteable(pChild->pDbPage) );
  assert( sqlite3PagerIswriteable(pRoot->pDbPage) );
  assert( pChild->nCell==pRoot->nCell );

  TRACE(("BALANCE: copy root %d into %d\n", pRoot->pgno, pChild->pgno));

  /* Copy the overflow cells from pRoot to pChild */
  memcpy(pChild->aiOvfl, pRoot->aiOvfl,
         pRoot->nOverflow*sizeof(pRoot->aiOvfl[0]));
  memcpy(pChild->apOvfl, pRoot->apOvfl,
         pRoot->nOverflow*sizeof(pRoot->apOvfl[0]));
  pChild->nOverflow = pRoot->nOverflow;

  /* Zero the contents of pRoot. Then install pChild as the right-child. */
  zeroPage(pRoot, pChild->aData[0] & ~PTF_LEAF);
  put4byte(&pRoot->aData[pRoot->hdrOffset+8], pgnoChild);

  *ppChild = pChild;

      int const iIdx = pCur->aiIdx[iPage-1];

      rc = sqlite3PagerWrite(pParent->pDbPage);
      if( rc==SQLITE_OK ){
#ifndef SQLITE_OMIT_QUICKBALANCE
        if( pPage->hasData
         && pPage->nOverflow==1
         && pPage->aiOvfl[0]==pPage->nCell
         && pParent->pgno!=1
         && pParent->nCell==iIdx
        ){
          /* Call balance_quick() to create a new sibling of pPage on which
          ** to store the overflow cell. balance_quick() inserts a new cell
          ** into pParent, which may cause pParent overflow. If this
          ** happens, the next interation of the do-loop will balance pParent 

    while( *pp!=p ){
      pp = &(*pp)->pNext;
    }
    *pp = p->pNext;
  }

  /* If a transaction is still open on the Btree, roll it back. */
  sqlite3BtreeRollback(p->pDest, SQLITE_OK);

  /* Set the error code of the destination database handle. */
  rc = (p->rc==SQLITE_DONE) ? SQLITE_OK : p->rc;
  sqlite3Error(p->pDestDb, rc, 0);

  /* Exit the mutexes and free the backup context structure. */
  if( p->pDestDb ){

    }
  }

  if( pMem->z && preserve && pMem->zMalloc && pMem->z!=pMem->zMalloc ){
    memcpy(pMem->zMalloc, pMem->z, pMem->n);
  }
  if( pMem->flags&MEM_Dyn && pMem->xDel ){
    assert( pMem->xDel!=SQLITE_DYNAMIC );
    pMem->xDel((void *)(pMem->z));
  }

  pMem->z = pMem->zMalloc;
  if( pMem->z==0 ){
    pMem->flags = MEM_Null;
  }else{

  assert( p->db==0 || sqlite3_mutex_held(p->db->mutex) );
  if( p->flags&MEM_Agg ){
    sqlite3VdbeMemFinalize(p, p->u.pDef);
    assert( (p->flags & MEM_Agg)==0 );
    sqlite3VdbeMemRelease(p);
  }else if( p->flags&MEM_Dyn && p->xDel ){
    assert( (p->flags&MEM_RowSet)==0 );
    assert( p->xDel!=SQLITE_DYNAMIC );
    p->xDel((void *)p->z);
    p->xDel = 0;
  }else if( p->flags&MEM_RowSet ){
    sqlite3RowSetClear(p->u.pRowSet);
  }else if( p->flags&MEM_Frame ){
    sqlite3VdbeMemSetNull(p);
  }

  **
  ** The second and third terms in the following conditional enforces
  ** the second condition under the assumption that addition overflow causes
  ** values to wrap around.  On x86 hardware, the third term is always
  ** true and could be omitted.  But we leave it in because other
  ** architectures might behave differently.
  */
  if( pMem->r==(double)pMem->u.i
   && pMem->u.i>SMALLEST_INT64
#if defined(__i486__) || defined(__x86_64__)
   && ALWAYS(pMem->u.i<LARGEST_INT64)
#else
   && pMem->u.i<LARGEST_INT64
#endif
  ){
    pMem->flags |= MEM_Int;
  }
}

/*
** Convert pMem to type integer.  Invalidate any prior representations.
*/

** The VDBE knows that a P2 value is a label because labels are
** always negative and P2 values are suppose to be non-negative.
** Hence, a negative P2 value is a label that has yet to be resolved.
**
** Zero is returned if a malloc() fails.
*/
SQLITE_PRIVATE int sqlite3VdbeMakeLabel(Vdbe *p){

  int i = p->nLabel++;
  assert( p->magic==VDBE_MAGIC_INIT );
  if( (i & (i-1))==0 ){

    p->aLabel = sqlite3DbReallocOrFree(p->db, p->aLabel, 
                                       (i*2+1)*sizeof(p->aLabel[0]));

  }
  if( p->aLabel ){
    p->aLabel[i] = -1;
  }
  return -1-i;
}

  assert( cnt==db->activeVdbeCnt );
  assert( nWrite==db->writeVdbeCnt );
}
#else
#define checkActiveVdbeCnt(x)
#endif



























/*
** If the Vdbe passed as the first argument opened a statement-transaction,
** close it now. Argument eOp must be either SAVEPOINT_ROLLBACK or
** SAVEPOINT_RELEASE. If it is SAVEPOINT_ROLLBACK, then the statement
** transaction is rolled back. If eOp is SAVEPOINT_RELEASE, then the 
** statement transaction is commtted.
**

      if( !p->readOnly || mrc!=SQLITE_INTERRUPT ){
        if( (mrc==SQLITE_NOMEM || mrc==SQLITE_FULL) && p->usesStmtJournal ){
          eStatementOp = SAVEPOINT_ROLLBACK;
        }else{
          /* We are forced to roll back the active transaction. Before doing
          ** so, abort any other statements this handle currently has active.
          */

          sqlite3RollbackAll(db, SQLITE_ABORT_ROLLBACK);
          sqlite3CloseSavepoints(db);
          db->autoCommit = 1;
        }
      }
    }

    /* Check for immediate foreign key violations. */

          rc = vdbeCommit(db, p);
        }
        if( rc==SQLITE_BUSY && p->readOnly ){
          sqlite3VdbeLeave(p);
          return SQLITE_BUSY;
        }else if( rc!=SQLITE_OK ){
          p->rc = rc;
          sqlite3RollbackAll(db, SQLITE_OK);
        }else{
          db->nDeferredCons = 0;
          sqlite3CommitInternalChanges(db);
        }
      }else{
        sqlite3RollbackAll(db, SQLITE_OK);
      }
      db->nStatement = 0;
    }else if( eStatementOp==0 ){
      if( p->rc==SQLITE_OK || p->errorAction==OE_Fail ){
        eStatementOp = SAVEPOINT_RELEASE;
      }else if( p->errorAction==OE_Abort ){
        eStatementOp = SAVEPOINT_ROLLBACK;
      }else{

        sqlite3RollbackAll(db, SQLITE_ABORT_ROLLBACK);
        sqlite3CloseSavepoints(db);
        db->autoCommit = 1;
      }
    }
  
    /* If eStatementOp is non-zero, then a statement transaction needs to
    ** be committed or rolled back. Call sqlite3VdbeCloseStatement() to
    ** do so. If this operation returns an error, and the current statement
    ** error code is SQLITE_OK or SQLITE_CONSTRAINT, then promote the
    ** current statement error code.
    */
    if( eStatementOp ){
      rc = sqlite3VdbeCloseStatement(p, eStatementOp);
      if( rc ){
        if( p->rc==SQLITE_OK || p->rc==SQLITE_CONSTRAINT ){
          p->rc = rc;
          sqlite3DbFree(db, p->zErrMsg);
          p->zErrMsg = 0;
        }

        sqlite3RollbackAll(db, SQLITE_ABORT_ROLLBACK);
        sqlite3CloseSavepoints(db);
        db->autoCommit = 1;
      }
    }
  
    /* If this was an INSERT, UPDATE or DELETE and no statement transaction
    ** has been rolled back, update the database connection change-counter. 
    */
    if( p->changeCntOn ){
      if( eStatementOp!=SAVEPOINT_ROLLBACK ){
        sqlite3VdbeSetChanges(db, p->nChange);
      }else{
        sqlite3VdbeSetChanges(db, 0);
      }
      p->nChange = 0;
    }







    /* Release the locks */
    sqlite3VdbeLeave(p);
  }

  /* We have successfully halted and closed the VM.  Record this fact. */
  if( p->pc>=0 ){

  break;

arithmetic_result_is_null:
  sqlite3VdbeMemSetNull(pOut);
  break;
}

/* Opcode: CollSeq P1 * * P4
**
** P4 is a pointer to a CollSeq struct. If the next call to a user function
** or aggregate calls sqlite3GetFuncCollSeq(), this collation sequence will
** be returned. This is used by the built-in min(), max() and nullif()
** functions.
**
** If P1 is not zero, then it is a register that a subsequent min() or
** max() aggregate will set to 1 if the current row is not the minimum or
** maximum.  The P1 register is initialized to 0 by this instruction.
**
** The interface used by the implementation of the aforementioned functions
** to retrieve the collation sequence set by this opcode is not available
** publicly, only to user functions defined in func.c.
*/
case OP_CollSeq: {
  assert( pOp->p4type==P4_COLLSEQ );
  if( pOp->p1 ){
    sqlite3VdbeMemSetInt64(&aMem[pOp->p1], 0);
  }
  break;
}

/* Opcode: Function P1 P2 P3 P4 P5
**
** Invoke a user function (P4 is a pointer to a Function structure that
** defines the function) with P5 arguments taken from register P2 and

      u.ar.pSavepoint = u.ar.pSavepoint->pNext
    ){
      u.ar.iSavepoint++;
    }
    if( !u.ar.pSavepoint ){
      sqlite3SetString(&p->zErrMsg, db, "no such savepoint: %s", u.ar.zName);
      rc = SQLITE_ERROR;
    }else if( db->writeVdbeCnt>0 && u.ar.p1==SAVEPOINT_RELEASE ){


      /* It is not possible to release (commit) a savepoint if there are
      ** active write statements.

      */
      sqlite3SetString(&p->zErrMsg, db,
        "cannot release savepoint - SQL statements in progress"

      );
      rc = SQLITE_BUSY;
    }else{

      /* Determine whether or not this is a transaction savepoint. If so,
      ** and this is a RELEASE command, then the current transaction
      ** is committed.

          p->rc = rc = SQLITE_BUSY;
          goto vdbe_return;
        }
        db->isTransactionSavepoint = 0;
        rc = p->rc;
      }else{
        u.ar.iSavepoint = db->nSavepoint - u.ar.iSavepoint - 1;
        for(u.ar.ii=0; u.ar.ii<db->nDb; u.ar.ii++){
          sqlite3BtreeTripAllCursors(db->aDb[u.ar.ii].pBt, SQLITE_ABORT);
        }
        for(u.ar.ii=0; u.ar.ii<db->nDb; u.ar.ii++){
          rc = sqlite3BtreeSavepoint(db->aDb[u.ar.ii].pBt, u.ar.p1, u.ar.iSavepoint);
          if( rc!=SQLITE_OK ){
            goto abort_due_to_error;
          }
        }
        if( u.ar.p1==SAVEPOINT_ROLLBACK && (db->flags&SQLITE_InternChanges)!=0 ){

  u.as.desiredAutoCommit = pOp->p1;
  u.as.iRollback = pOp->p2;
  u.as.turnOnAC = u.as.desiredAutoCommit && !db->autoCommit;
  assert( u.as.desiredAutoCommit==1 || u.as.desiredAutoCommit==0 );
  assert( u.as.desiredAutoCommit==1 || u.as.iRollback==0 );
  assert( db->activeVdbeCnt>0 );  /* At least this one VM is active */

#if 0
  if( u.as.turnOnAC && u.as.iRollback && db->activeVdbeCnt>1 ){
    /* If this instruction implements a ROLLBACK and other VMs are
    ** still running, and a transaction is active, return an error indicating
    ** that the other VMs must complete first.
    */
    sqlite3SetString(&p->zErrMsg, db, "cannot rollback transaction - "
        "SQL statements in progress");
    rc = SQLITE_BUSY;
  }else
#endif
  if( u.as.turnOnAC && !u.as.iRollback && db->writeVdbeCnt>0 ){
    /* If this instruction implements a COMMIT and other VMs are writing
    ** return an error indicating that the other VMs must complete first.
    */
    sqlite3SetString(&p->zErrMsg, db, "cannot commit transaction - "
        "SQL statements in progress");
    rc = SQLITE_BUSY;
  }else if( u.as.desiredAutoCommit!=db->autoCommit ){
    if( u.as.iRollback ){
      assert( u.as.desiredAutoCommit==1 );
      sqlite3RollbackAll(db, SQLITE_ABORT_ROLLBACK);
      db->autoCommit = 1;
    }else if( (rc = sqlite3VdbeCheckFk(p, 1))!=SQLITE_OK ){
      goto vdbe_return;
    }else{
      db->autoCommit = (u8)u.as.desiredAutoCommit;
      if( sqlite3VdbeHalt(p)==SQLITE_BUSY ){
        p->pc = pc;

** on the file.
**
** If a write-transaction is started and the Vdbe.usesStmtJournal flag is
** true (this flag is set if the Vdbe may modify more than one row and may
** throw an ABORT exception), a statement transaction may also be opened.
** More specifically, a statement transaction is opened iff the database
** connection is currently not in autocommit mode, or if there are other
** active statements. A statement transaction allows the changes made by this
** VDBE to be rolled back after an error without having to roll back the
** entire transaction. If no error is encountered, the statement transaction
** will automatically commit when the VDBE halts.
**
** If P2 is zero, then a read-lock is obtained on the database file.
*/
case OP_Transaction: {

        }
        if( u.bg.res ){
          u.bg.v = 1;   /* IMP: R-61914-48074 */
        }else{
          assert( sqlite3BtreeCursorIsValid(u.bg.pC->pCursor) );
          rc = sqlite3BtreeKeySize(u.bg.pC->pCursor, &u.bg.v);
          assert( rc==SQLITE_OK );   /* Cannot fail following BtreeLast() */
          if( u.bg.v>=MAX_ROWID ){
            u.bg.pC->useRandomRowid = 1;
          }else{
            u.bg.v++;   /* IMP: R-29538-34987 */
          }
        }
      }

      assert( !db->mallocFailed );
      rc = sqlite3_exec(db, u.by.zSql, sqlite3InitCallback, &u.by.initData, 0);
      if( rc==SQLITE_OK ) rc = u.by.initData.rc;
      sqlite3DbFree(db, u.by.zSql);
      db->init.busy = 0;
    }
  }
  if( rc ) sqlite3ResetInternalSchema(db, -1);
  if( rc==SQLITE_NOMEM ){
    goto no_mem;
  }
  break;
}

#if !defined(SQLITE_OMIT_ANALYZE)

  p->nMem = u.cc.pFrame->nChildMem;
  p->nCursor = (u16)u.cc.pFrame->nChildCsr;
  p->apCsr = (VdbeCursor **)&aMem[p->nMem+1];
  p->aOp = aOp = u.cc.pProgram->aOp;
  p->nOp = u.cc.pProgram->nOp;
  p->aOnceFlag = (u8 *)&p->apCsr[p->nCursor];
  p->nOnceFlag = u.cc.pProgram->nOnce;

  pc = -1;
  memset(p->aOnceFlag, 0, p->nOnceFlag);

  break;
}

/* Opcode: Param P1 P2 * * *

  u.cf.ctx.s.flags = MEM_Null;
  u.cf.ctx.s.z = 0;
  u.cf.ctx.s.zMalloc = 0;
  u.cf.ctx.s.xDel = 0;
  u.cf.ctx.s.db = db;
  u.cf.ctx.isError = 0;
  u.cf.ctx.pColl = 0;
  u.cf.ctx.skipFlag = 0;
  if( u.cf.ctx.pFunc->flags & SQLITE_FUNC_NEEDCOLL ){
    assert( pOp>p->aOp );
    assert( pOp[-1].p4type==P4_COLLSEQ );
    assert( pOp[-1].opcode==OP_CollSeq );
    u.cf.ctx.pColl = pOp[-1].p4.pColl;
  }
  (u.cf.ctx.pFunc->xStep)(&u.cf.ctx, u.cf.n, u.cf.apVal); /* IMP: R-24505-23230 */
  if( u.cf.ctx.isError ){
    sqlite3SetString(&p->zErrMsg, db, "%s", sqlite3_value_text(&u.cf.ctx.s));
    rc = u.cf.ctx.isError;
  }
  if( u.cf.ctx.skipFlag ){
    assert( pOp[-1].opcode==OP_CollSeq );
    u.cf.i = pOp[-1].p1;
    if( u.cf.i ) sqlite3VdbeMemSetInt64(&aMem[u.cf.i], 1);
  }

  sqlite3VdbeMemRelease(&u.cf.ctx.s);

  break;
}

/* Opcode: AggFinal P1 P2 * P4 *

**     aTree[] = { X, 0   0, 6    0, 3, 5, 6 }
**
** In other words, each time we advance to the next sorter element, log2(N)
** key comparison operations are required, where N is the number of segments
** being merged (rounded up to the next power of 2).
*/
struct VdbeSorter {
  i64 iWriteOff;                  /* Current write offset within file pTemp1 */
  i64 iReadOff;                   /* Current read offset within file pTemp1 */
  int nInMemory;                  /* Current size of pRecord list as PMA */
  int nTree;                      /* Used size of aTree/aIter (power of 2) */
  int nPMA;                       /* Number of PMAs stored in pTemp1 */
  int mnPmaSize;                  /* Minimum PMA size, in bytes */
  int mxPmaSize;                  /* Maximum PMA size, in bytes.  0==no limit */
  VdbeSorterIter *aIter;          /* Array of iterators to merge */
  int *aTree;                     /* Current state of incremental merge */


  sqlite3_file *pTemp1;           /* PMA file 1 */

  SorterRecord *pRecord;          /* Head of in-memory record list */


  UnpackedRecord *pUnpacked;      /* Used to unpack keys */
};

/*
** The following type is an iterator for a PMA. It caches the current key in 
** variables nKey/aKey. If the iterator is at EOF, pFile==0.
*/
struct VdbeSorterIter {
  i64 iReadOff;                   /* Current read offset */
  i64 iEof;                       /* 1 byte past EOF for this iterator */

  int nAlloc;                     /* Bytes of space at aAlloc */

  int nKey;                       /* Number of bytes in key */
  sqlite3_file *pFile;            /* File iterator is reading from */
  u8 *aAlloc;                     /* Allocated space */
  u8 *aKey;                       /* Pointer to current key */
};

/*
** A structure to store a single record. All in-memory records are connected
** together into a linked list headed at VdbeSorter.pRecord using the 
** SorterRecord.pNext pointer.

  ExprList *pNew;
  struct ExprList_item *pItem, *pOldItem;
  int i;
  if( p==0 ) return 0;
  pNew = sqlite3DbMallocRaw(db, sizeof(*pNew) );
  if( pNew==0 ) return 0;
  pNew->iECursor = 0;
  pNew->nExpr = i = p->nExpr;
  if( (flags & EXPRDUP_REDUCE)==0 ) for(i=1; i<p->nExpr; i+=i){}
  pNew->a = pItem = sqlite3DbMallocRaw(db,  i*sizeof(p->a[0]) );
  if( pItem==0 ){
    sqlite3DbFree(db, pNew);
    return 0;
  } 
  pOldItem = p->a;
  for(i=0; i<p->nExpr; i++, pItem++, pOldItem++){
    Expr *pOldExpr = pOldItem->pExpr;

}
SQLITE_PRIVATE IdList *sqlite3IdListDup(sqlite3 *db, IdList *p){
  IdList *pNew;
  int i;
  if( p==0 ) return 0;
  pNew = sqlite3DbMallocRaw(db, sizeof(*pNew) );
  if( pNew==0 ) return 0;
  pNew->nId = p->nId;
  pNew->a = sqlite3DbMallocRaw(db, p->nId*sizeof(p->a[0]) );
  if( pNew->a==0 ){
    sqlite3DbFree(db, pNew);
    return 0;
  }
  /* Note that because the size of the allocation for p->a[] is not
  ** necessarily a power of two, sqlite3IdListAppend() may not be called
  ** on the duplicate created by this function. */
  for(i=0; i<p->nId; i++){
    struct IdList_item *pNewItem = &pNew->a[i];
    struct IdList_item *pOldItem = &p->a[i];
    pNewItem->zName = sqlite3DbStrDup(db, pOldItem->zName);
    pNewItem->idx = pOldItem->idx;
  }
  return pNew;

){
  sqlite3 *db = pParse->db;
  if( pList==0 ){
    pList = sqlite3DbMallocZero(db, sizeof(ExprList) );
    if( pList==0 ){
      goto no_mem;
    }
    pList->a = sqlite3DbMallocRaw(db, sizeof(pList->a[0]));
    if( pList->a==0 ) goto no_mem;

  }else if( (pList->nExpr & (pList->nExpr-1))==0 ){
    struct ExprList_item *a;
    assert( pList->nExpr>0 );
    a = sqlite3DbRealloc(db, pList->a, pList->nExpr*2*sizeof(pList->a[0]));
    if( a==0 ){
      goto no_mem;
    }
    pList->a = a;

  }
  assert( pList->a!=0 );
  if( 1 ){
    struct ExprList_item *pItem = &pList->a[pList->nExpr++];
    memset(pItem, 0, sizeof(*pItem));
    pItem->pExpr = pExpr;
  }

/*
** Delete an entire expression list.
*/
SQLITE_PRIVATE void sqlite3ExprListDelete(sqlite3 *db, ExprList *pList){
  int i;
  struct ExprList_item *pItem;
  if( pList==0 ) return;
  assert( pList->a!=0 || pList->nExpr==0 );

  for(pItem=pList->a, i=0; i<pList->nExpr; i++, pItem++){
    sqlite3ExprDelete(db, pItem->pExpr);
    sqlite3DbFree(db, pItem->zName);
    sqlite3DbFree(db, pItem->zSpan);
  }
  sqlite3DbFree(db, pList->a);
  sqlite3DbFree(db, pList);

*/
static int addAggInfoColumn(sqlite3 *db, AggInfo *pInfo){
  int i;
  pInfo->aCol = sqlite3ArrayAllocate(
       db,
       pInfo->aCol,
       sizeof(pInfo->aCol[0]),

       &pInfo->nColumn,

       &i
  );
  return i;
}    

/*
** Add a new element to the pAggInfo->aFunc[] array.  Return the index of
** the new element.  Return a negative number if malloc fails.
*/
static int addAggInfoFunc(sqlite3 *db, AggInfo *pInfo){
  int i;
  pInfo->aFunc = sqlite3ArrayAllocate(
       db, 
       pInfo->aFunc,
       sizeof(pInfo->aFunc[0]),

       &pInfo->nFunc,

       &i
  );
  return i;
}    

/*
** This is the xExprCallback for a tree walker.  It is used to

#endif
          "tbl_name = %Q, "
          "name = CASE "
            "WHEN type='table' THEN %Q "
            "WHEN name LIKE 'sqlite_autoindex%%' AND type='index' THEN "
             "'sqlite_autoindex_' || %Q || substr(name,%d+18) "
            "ELSE name END "
      "WHERE tbl_name=%Q COLLATE nocase AND "
          "(type='table' OR type='index' OR type='trigger');", 
      zDb, SCHEMA_TABLE(iDb), zName, zName, zName, 
#ifndef SQLITE_OMIT_TRIGGER
      zName,
#endif
      zName, nTabName, zTabName
  );

  sqlite3_stmt *pStmt = 0;      /* An SQL statement being run */
  char *zSql;                   /* Text of the SQL statement */
  Index *pPrevIdx = 0;          /* Previous index in the loop */
  int idx = 0;                  /* slot in pIdx->aSample[] for next sample */
  int eType;                    /* Datatype of a sample */
  IndexSample *pSample;         /* A slot in pIdx->aSample[] */

  assert( db->lookaside.bEnabled==0 );
  if( !sqlite3FindTable(db, "sqlite_stat3", zDb) ){
    return SQLITE_OK;
  }

  zSql = sqlite3MPrintf(db, 
      "SELECT idx,count(*) FROM %Q.sqlite_stat3"
      " GROUP BY idx", zDb);

    zIndex = (char *)sqlite3_column_text(pStmt, 0);
    if( zIndex==0 ) continue;
    nSample = sqlite3_column_int(pStmt, 1);
    pIdx = sqlite3FindIndex(db, zIndex, zDb);
    if( pIdx==0 ) continue;
    assert( pIdx->nSample==0 );
    pIdx->nSample = nSample;
    pIdx->aSample = sqlite3DbMallocZero(db, nSample*sizeof(IndexSample));
    pIdx->avgEq = pIdx->aiRowEst[1];
    if( pIdx->aSample==0 ){
      db->mallocFailed = 1;
      sqlite3_finalize(pStmt);
      return SQLITE_NOMEM;
    }
  }

              sqlite3_column_text(pStmt, 4)
           );
        int n = z ? sqlite3_column_bytes(pStmt, 4) : 0;
        pSample->nByte = n;
        if( n < 1){
          pSample->u.z = 0;
        }else{
          pSample->u.z = sqlite3DbMallocRaw(db, n);
          if( pSample->u.z==0 ){
            db->mallocFailed = 1;
            sqlite3_finalize(pStmt);
            return SQLITE_NOMEM;
          }
          memcpy(pSample->u.z, z, n);
        }

    sqlite3DbFree(db, zSql);
  }


  /* Load the statistics from the sqlite_stat3 table. */
#ifdef SQLITE_ENABLE_STAT3
  if( rc==SQLITE_OK ){
    int lookasideEnabled = db->lookaside.bEnabled;
    db->lookaside.bEnabled = 0;
    rc = loadStat3(db, sInfo.zDatabase);
    db->lookaside.bEnabled = lookasideEnabled;
  }
#endif

  if( rc==SQLITE_NOMEM ){
    db->mallocFailed = 1;
  }
  return rc;

                             sqlite3Strlen30(p->zName),p);
    if( pOld ){
      assert( p==pOld );  /* Malloc must have failed inside HashInsert() */
      db->mallocFailed = 1;
      return;
    }
    pParse->pNewTable = 0;

    db->flags |= SQLITE_InternChanges;

#ifndef SQLITE_OMIT_ALTERTABLE
    if( !p->pSelect ){
      const char *zName = (const char *)pParse->sNameToken.z;
      int nName;
      assert( !pSelect && pCons && pEnd );

** might be the same as the pArray parameter or it might be a different
** pointer if the array was resized.
*/
SQLITE_PRIVATE void *sqlite3ArrayAllocate(
  sqlite3 *db,      /* Connection to notify of malloc failures */
  void *pArray,     /* Array of objects.  Might be reallocated */
  int szEntry,      /* Size of each object in the array */

  int *pnEntry,     /* Number of objects currently in use */

  int *pIdx         /* Write the index of a new slot here */
){
  char *z;
  int n = *pnEntry;
  if( (n & (n-1))==0 ){
    int sz = (n==0) ? 1 : 2*n;

    void *pNew = sqlite3DbRealloc(db, pArray, sz*szEntry);
    if( pNew==0 ){
      *pIdx = -1;
      return pArray;
    }

    pArray = pNew;
  }
  z = (char*)pArray;
  memset(&z[n * szEntry], 0, szEntry);
  *pIdx = n;
  ++*pnEntry;
  return pArray;
}

/*
** Append a new element to the given IdList.  Create a new IdList if
** need be.
**
** A new IdList is returned, or NULL if malloc() fails.
*/
SQLITE_PRIVATE IdList *sqlite3IdListAppend(sqlite3 *db, IdList *pList, Token *pToken){
  int i;
  if( pList==0 ){
    pList = sqlite3DbMallocZero(db, sizeof(IdList) );
    if( pList==0 ) return 0;

  }
  pList->a = sqlite3ArrayAllocate(
      db,
      pList->a,
      sizeof(pList->a[0]),

      &pList->nId,

      &i
  );
  if( i<0 ){
    sqlite3IdListDelete(db, pList);
    return 0;
  }
  pList->a[i].zName = sqlite3NameFromToken(db, pToken);

/*
** Return the collating function associated with a function.
*/
static CollSeq *sqlite3GetFuncCollSeq(sqlite3_context *context){
  return context->pColl;
}

/*
** Indicate that the accumulator load should be skipped on this
** iteration of the aggregate loop.
*/
static void sqlite3SkipAccumulatorLoad(sqlite3_context *context){
  context->skipFlag = 1;
}

/*
** Implementation of the non-aggregate min() and max() functions
*/
static void minmaxFunc(
  sqlite3_context *context,
  int argc,

    ** (or -9223372036854775808) since when you do abs() of that
    ** number of you get the same value back again.  To do this
    ** in a way that is testable, mask the sign bit off of negative
    ** values, resulting in a positive value.  Then take the 
    ** 2s complement of that positive value.  The end result can
    ** therefore be no less than -9223372036854775807.
    */
    r = -(r & LARGEST_INT64);
  }
  sqlite3_result_int64(context, r);
}

/*
** Implementation of randomblob(N).  Return a random blob
** that is N bytes long.

  int NotUsed, 
  sqlite3_value **argv
){
  Mem *pArg  = (Mem *)argv[0];
  Mem *pBest;
  UNUSED_PARAMETER(NotUsed);


  pBest = (Mem *)sqlite3_aggregate_context(context, sizeof(*pBest));
  if( !pBest ) return;

  if( sqlite3_value_type(argv[0])==SQLITE_NULL ){
    if( pBest->flags ) sqlite3SkipAccumulatorLoad(context);
  }else if( pBest->flags ){
    int max;
    int cmp;
    CollSeq *pColl = sqlite3GetFuncCollSeq(context);
    /* This step function is used for both the min() and max() aggregates,
    ** the only difference between the two being that the sense of the
    ** comparison is inverted. For the max() aggregate, the
    ** sqlite3_user_data() function returns (void *)-1. For min() it
    ** returns (void *)db, where db is the sqlite3* database pointer.
    ** Therefore the next statement sets variable 'max' to 1 for the max()
    ** aggregate, or 0 for min().
    */
    max = sqlite3_user_data(context)!=0;
    cmp = sqlite3MemCompare(pBest, pArg, pColl);
    if( (max && cmp<0) || (!max && cmp>0) ){
      sqlite3VdbeMemCopy(pBest, pArg);
    }else{
      sqlite3SkipAccumulatorLoad(context);
    }
  }else{
    sqlite3VdbeMemCopy(pBest, pArg);
  }
}
static void minMaxFinalize(sqlite3_context *context){
  sqlite3_value *pRes;
  pRes = (sqlite3_value *)sqlite3_aggregate_context(context, 0);
  if( pRes ){
    if( pRes->flags ){
      sqlite3_result_value(context, pRes);
    }
    sqlite3VdbeMemRelease(pRes);
  }
}

/*

*************************************************************************
** This file contains code used to implement the PRAGMA command.
*/

/*
** Interpret the given string as a safety level.  Return 0 for OFF,
** 1 for ON or NORMAL and 2 for FULL.  Return 1 for an empty or 
** unrecognized string argument.  The FULL option is disallowed
** if the omitFull parameter it 1.
**
** Note that the values returned are one less that the values that
** should be passed into sqlite3BtreeSetSafetyLevel().  The is done
** to support legacy SQL code.  The safety level used to be boolean
** and older scripts may have used numbers 0 for OFF and 1 for ON.
*/
static u8 getSafetyLevel(const char *z, int omitFull, int dflt){
                             /* 123456789 123456789 */
  static const char zText[] = "onoffalseyestruefull";
  static const u8 iOffset[] = {0, 1, 2, 4, 9, 12, 16};
  static const u8 iLength[] = {2, 2, 3, 5, 3, 4, 4};
  static const u8 iValue[] =  {1, 0, 0, 0, 1, 1, 2};
  int i, n;
  if( sqlite3Isdigit(*z) ){
    return (u8)sqlite3Atoi(z);
  }
  n = sqlite3Strlen30(z);
  for(i=0; i<ArraySize(iLength)-omitFull; i++){
    if( iLength[i]==n && sqlite3StrNICmp(&zText[iOffset[i]],z,n)==0 ){
      return iValue[i];
    }
  }
  return dflt;
}

/*
** Interpret the given string as a boolean value.
*/
SQLITE_PRIVATE u8 sqlite3GetBoolean(const char *z, int dflt){
  return getSafetyLevel(z,1,dflt)!=0;
}

/* The sqlite3GetBoolean() function is used by other modules but the
** remainder of this file is specific to PRAGMA processing.  So omit
** the rest of the file if PRAGMAs are omitted from the build.
*/
#if !defined(SQLITE_OMIT_PRAGMA)

    { "vdbe_trace",               SQLITE_VdbeTrace     },
#endif
#ifndef SQLITE_OMIT_CHECK
    { "ignore_check_constraints", SQLITE_IgnoreChecks  },
#endif
    /* The following is VERY experimental */
    { "writable_schema",          SQLITE_WriteSchema|SQLITE_RecoveryMode },


    /* TODO: Maybe it shouldn't be possible to change the ReadUncommitted
    ** flag if there are any active statements. */
    { "read_uncommitted",         SQLITE_ReadUncommitted },
    { "recursive_triggers",       SQLITE_RecTriggers },

    /* This flag may only be set if both foreign-key and trigger support

          int mask = p->mask;          /* Mask of bits to set or clear. */
          if( db->autoCommit==0 ){
            /* Foreign key support may not be enabled or disabled while not
            ** in auto-commit mode.  */
            mask &= ~(SQLITE_ForeignKeys);
          }

          if( sqlite3GetBoolean(zRight, 0) ){
            db->flags |= mask;
          }else{
            db->flags &= ~mask;
          }

          /* Many of the flag-pragmas modify the code generated by the SQL 
          ** compiler (eg. count_changes). So add an opcode to expire all

  int minusFlag       /* True if a '-' sign preceded <value> */
){
  char *zLeft = 0;       /* Nul-terminated UTF-8 string <id> */
  char *zRight = 0;      /* Nul-terminated UTF-8 string <value>, or NULL */
  const char *zDb = 0;   /* The database name */
  Token *pId;            /* Pointer to <id> token */
  int iDb;               /* Database index for <database> */
  char *aFcntl[4];       /* Argument to SQLITE_FCNTL_PRAGMA */
  int rc;                      /* return value form SQLITE_FCNTL_PRAGMA */
  sqlite3 *db = pParse->db;    /* The database connection */
  Db *pDb;                     /* The specific database being pragmaed */
  Vdbe *v = pParse->pVdbe = sqlite3VdbeCreate(db);  /* Prepared statement */

  if( v==0 ) return;
  sqlite3VdbeRunOnlyOnce(v);
  pParse->nMem = 2;

  /* Interpret the [database.] part of the pragma statement. iDb is the
  ** index of the database this pragma is being applied to in db.aDb[]. */
  iDb = sqlite3TwoPartName(pParse, pId1, pId2, &pId);

  }

  assert( pId2 );
  zDb = pId2->n>0 ? pDb->zName : 0;
  if( sqlite3AuthCheck(pParse, SQLITE_PRAGMA, zLeft, zRight, zDb) ){
    goto pragma_out;
  }

  /* Send an SQLITE_FCNTL_PRAGMA file-control to the underlying VFS
  ** connection.  If it returns SQLITE_OK, then assume that the VFS
  ** handled the pragma and generate a no-op prepared statement.
  */
  aFcntl[0] = 0;
  aFcntl[1] = zLeft;
  aFcntl[2] = zRight;
  aFcntl[3] = 0;
  rc = sqlite3_file_control(db, zDb, SQLITE_FCNTL_PRAGMA, (void*)aFcntl);
  if( rc==SQLITE_OK ){
    if( aFcntl[0] ){
      int mem = ++pParse->nMem;
      sqlite3VdbeAddOp4(v, OP_String8, 0, mem, 0, aFcntl[0], 0);
      sqlite3VdbeSetNumCols(v, 1);
      sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "result", SQLITE_STATIC);
      sqlite3VdbeAddOp2(v, OP_ResultRow, mem, 1);
      sqlite3_free(aFcntl[0]);
    }
  }else if( rc!=SQLITE_NOTFOUND ){
    if( aFcntl[0] ){
      sqlite3ErrorMsg(pParse, "%s", aFcntl[0]);
      sqlite3_free(aFcntl[0]);
    }
    pParse->nErr++;
    pParse->rc = rc;
  }else
                            
 
#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) && !defined(SQLITE_OMIT_DEPRECATED)
  /*
  **  PRAGMA [database.]default_cache_size
  **  PRAGMA [database.]default_cache_size=N
  **
  ** The first form reports the current persistent setting for the

  ** flag setting and reports thenew value.
  */
  if( sqlite3StrICmp(zLeft,"secure_delete")==0 ){
    Btree *pBt = pDb->pBt;
    int b = -1;
    assert( pBt!=0 );
    if( zRight ){
      b = sqlite3GetBoolean(zRight, 0);
    }
    if( pId2->n==0 && b>=0 ){
      int ii;
      for(ii=0; ii<db->nDb; ii++){
        sqlite3BtreeSecureDelete(db->aDb[ii].pBt, b);
      }
    }

      db->nextAutovac = (u8)eAuto;
      if( ALWAYS(eAuto>=0) ){
        /* Call SetAutoVacuum() to set initialize the internal auto and
        ** incr-vacuum flags. This is required in case this connection
        ** creates the database file. It is important that it is created
        ** as an auto-vacuum capable db.
        */
        rc = sqlite3BtreeSetAutoVacuum(pBt, eAuto);
        if( rc==SQLITE_OK && (eAuto==1 || eAuto==2) ){
          /* When setting the auto_vacuum mode to either "full" or 
          ** "incremental", write the value of meta[6] in the database
          ** file. Before writing to meta[6], check that meta[3] indicates
          ** that this really is an auto-vacuum capable database.
          */
          static const VdbeOpList setMeta6[] = {

            "temp_store_directory", SQLITE_STATIC);
        sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0, sqlite3_temp_directory, 0);
        sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1);
      }
    }else{
#ifndef SQLITE_OMIT_WSD
      if( zRight[0] ){

        int res;
        rc = sqlite3OsAccess(db->pVfs, zRight, SQLITE_ACCESS_READWRITE, &res);
        if( rc!=SQLITE_OK || res==0 ){
          sqlite3ErrorMsg(pParse, "not a writable directory");
          goto pragma_out;
        }
      }

    if( !zRight ){
      returnSingleInt(pParse, "synchronous", pDb->safety_level-1);
    }else{
      if( !db->autoCommit ){
        sqlite3ErrorMsg(pParse, 
            "Safety level may not be changed inside a transaction");
      }else{
        pDb->safety_level = getSafetyLevel(zRight,0,1)+1;
      }
    }
  }else
#endif /* SQLITE_OMIT_PAGER_PRAGMAS */

#ifndef SQLITE_OMIT_FLAG_PRAGMAS
  if( flagPragma(pParse, zLeft, zRight) ){

    }
  }else
#endif /* !defined(SQLITE_OMIT_FOREIGN_KEY) */

#ifndef NDEBUG
  if( sqlite3StrICmp(zLeft, "parser_trace")==0 ){
    if( zRight ){
      if( sqlite3GetBoolean(zRight, 0) ){
        sqlite3ParserTrace(stderr, "parser: ");
      }else{
        sqlite3ParserTrace(0, 0);
      }
    }
  }else
#endif

  /* Reinstall the LIKE and GLOB functions.  The variant of LIKE
  ** used will be case sensitive or not depending on the RHS.
  */
  if( sqlite3StrICmp(zLeft, "case_sensitive_like")==0 ){
    if( zRight ){
      sqlite3RegisterLikeFunctions(db, sqlite3GetBoolean(zRight, 0));
    }
  }else

#ifndef SQLITE_INTEGRITY_CHECK_ERROR_MAX
# define SQLITE_INTEGRITY_CHECK_ERROR_MAX 100
#endif

    pNew = &standin;
    memset(pNew, 0, sizeof(*pNew));
  }
  if( pEList==0 ){
    pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db,TK_ALL,0));
  }
  pNew->pEList = pEList;
  if( pSrc==0 ) pSrc = sqlite3DbMallocZero(db, sizeof(*pSrc));
  pNew->pSrc = pSrc;
  pNew->pWhere = pWhere;
  pNew->pGroupBy = pGroupBy;
  pNew->pHaving = pHaving;
  pNew->pOrderBy = pOrderBy;
  pNew->selFlags = isDistinct ? SF_Distinct : 0;
  pNew->op = TK_SELECT;

  int cnt;                    /* Index added to make the name unique */
  Column *aCol, *pCol;        /* For looping over result columns */
  int nCol;                   /* Number of columns in the result set */
  Expr *p;                    /* Expression for a single result column */
  char *zName;                /* Column name */
  int nName;                  /* Size of name in zName[] */

  *pnCol = nCol = pEList ? pEList->nExpr : 0;
  aCol = *paCol = sqlite3DbMallocZero(db, sizeof(aCol[0])*nCol);
  if( aCol==0 ) return SQLITE_NOMEM;
  for(i=0, pCol=aCol; i<nCol; i++, pCol++){
    /* Get an appropriate name for the column
    */
    p = pEList->a[i].pExpr;
    assert( p->pRight==0 || ExprHasProperty(p->pRight, EP_IntValue)

  }

  /* Make sure all SELECTs in the statement have the same number of elements
  ** in their result sets.
  */
  assert( p->pEList && pPrior->pEList );
  if( p->pEList->nExpr!=pPrior->pEList->nExpr ){
    if( p->selFlags & SF_Values ){
      sqlite3ErrorMsg(pParse, "all VALUES must have the same number of terms");
    }else{
      sqlite3ErrorMsg(pParse, "SELECTs to the left and right of %s"
        " do not have the same number of result columns", selectOpName(p->op));
    }
    rc = 1;
    goto multi_select_end;
  }

  /* Compound SELECTs that have an ORDER BY clause are handled separately.
  */
  if( p->pOrderBy ){

      }
      if( j==nOrderBy ){
        Expr *pNew = sqlite3Expr(db, TK_INTEGER, 0);
        if( pNew==0 ) return SQLITE_NOMEM;
        pNew->flags |= EP_IntValue;
        pNew->u.iValue = i;
        pOrderBy = sqlite3ExprListAppend(pParse, pOrderBy, pNew);
        if( pOrderBy ) pOrderBy->a[nOrderBy++].iOrderByCol = (u16)i;
      }
    }
  }

  /* Compute the comparison permutation and keyinfo that is used with
  ** the permutation used to determine if the next
  ** row of results comes from selectA or selectB.  Also add explicit

/*
** Update the accumulator memory cells for an aggregate based on
** the current cursor position.
*/
static void updateAccumulator(Parse *pParse, AggInfo *pAggInfo){
  Vdbe *v = pParse->pVdbe;
  int i;
  int regHit = 0;
  int addrHitTest = 0;
  struct AggInfo_func *pF;
  struct AggInfo_col *pC;

  pAggInfo->directMode = 1;
  sqlite3ExprCacheClear(pParse);
  for(i=0, pF=pAggInfo->aFunc; i<pAggInfo->nFunc; i++, pF++){
    int nArg;

      assert( pList!=0 );  /* pList!=0 if pF->pFunc has NEEDCOLL */
      for(j=0, pItem=pList->a; !pColl && j<nArg; j++, pItem++){
        pColl = sqlite3ExprCollSeq(pParse, pItem->pExpr);
      }
      if( !pColl ){
        pColl = pParse->db->pDfltColl;
      }
      if( regHit==0 && pAggInfo->nAccumulator ) regHit = ++pParse->nMem;
      sqlite3VdbeAddOp4(v, OP_CollSeq, regHit, 0, 0, (char *)pColl, P4_COLLSEQ);
    }
    sqlite3VdbeAddOp4(v, OP_AggStep, 0, regAgg, pF->iMem,
                      (void*)pF->pFunc, P4_FUNCDEF);
    sqlite3VdbeChangeP5(v, (u8)nArg);
    sqlite3ExprCacheAffinityChange(pParse, regAgg, nArg);
    sqlite3ReleaseTempRange(pParse, regAgg, nArg);
    if( addrNext ){

  ** to pC->iMem. But by the time the value is used, the original register
  ** may have been used, invalidating the underlying buffer holding the
  ** text or blob value. See ticket [883034dcb5].
  **
  ** Another solution would be to change the OP_SCopy used to copy cached
  ** values to an OP_Copy.
  */
  if( regHit ){
    addrHitTest = sqlite3VdbeAddOp1(v, OP_If, regHit);
  }
  sqlite3ExprCacheClear(pParse);
  for(i=0, pC=pAggInfo->aCol; i<pAggInfo->nAccumulator; i++, pC++){
    sqlite3ExprCode(pParse, pC->pExpr, pC->iMem);
  }
  pAggInfo->directMode = 0;
  sqlite3ExprCacheClear(pParse);
  if( addrHitTest ){
    sqlite3VdbeJumpHere(v, addrHitTest);
  }
}

/*
** Add a single OP_Explain instruction to the VDBE to explain a simple
** count(*) query ("SELECT count(*) FROM pTab").
*/
#ifndef SQLITE_OMIT_EXPLAIN

  }
  sqlite3ExplainPrintf(pVdbe, "END");
  sqlite3ExplainPop(pVdbe);
}

/* End of the structure debug printing code
*****************************************************************************/
#endif /* defined(SQLITE_ENABLE_TREE_EXPLAIN) */

/************** End of select.c **********************************************/
/************** Begin file table.c *******************************************/
/*
** 2001 September 15
**
** The author disclaims copyright to this source code.  In place of

    extern void sqlite3CodecGetKey(sqlite3*, int, void**, int*);
    int nKey;
    char *zKey;
    sqlite3CodecGetKey(db, 0, (void**)&zKey, &nKey);
    if( nKey ) db->nextPagesize = 0;
  }
#endif

  rc = execSql(db, pzErrMsg, "PRAGMA vacuum_db.synchronous=OFF");
  if( rc!=SQLITE_OK ) goto end_of_vacuum;

  /* Begin a transaction and take an exclusive lock on the main database
  ** file. This is done before the sqlite3BtreeGetPageSize(pMain) call below,
  ** to ensure that we do not try to change the page-size on a WAL database.
  */
  rc = execSql(db, pzErrMsg, "BEGIN;");
  if( rc!=SQLITE_OK ) goto end_of_vacuum;
  rc = sqlite3BtreeBeginTrans(pMain, 2);
  if( rc!=SQLITE_OK ) goto end_of_vacuum;

  /* Do not attempt to change the page size for a WAL database */
  if( sqlite3PagerGetJournalMode(sqlite3BtreePager(pMain))
                                               ==PAGER_JOURNALMODE_WAL ){
    db->nextPagesize = 0;
  }

  if( sqlite3BtreeSetPageSize(pTemp, sqlite3BtreeGetPageSize(pMain), nRes, 0)
   || (!isMemDb && sqlite3BtreeSetPageSize(pTemp, db->nextPagesize, nRes, 0))
   || NEVER(db->mallocFailed)
  ){
    rc = SQLITE_NOMEM;
    goto end_of_vacuum;
  }





#ifndef SQLITE_OMIT_AUTOVACUUM
  sqlite3BtreeSetAutoVacuum(pTemp, db->nextAutovac>=0 ? db->nextAutovac :
                                           sqlite3BtreeGetAutoVacuum(pMain));
#endif





  /* Query the schema of the main database. Create a mirror schema
  ** in the temporary database.
  */
  rc = execExecSql(db, pzErrMsg,
      "SELECT 'CREATE TABLE vacuum_db.' || substr(sql,14) "
      "  FROM sqlite_master WHERE type='table' AND name!='sqlite_sequence'"
      "   AND rootpage>0"

** statement.  The module name has been parsed, but the optional list
** of parameters that follow the module name are still pending.
*/
SQLITE_PRIVATE void sqlite3VtabBeginParse(
  Parse *pParse,        /* Parsing context */
  Token *pName1,        /* Name of new table, or database name */
  Token *pName2,        /* Name of new table or NULL */
  Token *pModuleName,   /* Name of the module for the virtual table */
  int ifNotExists       /* No error if the table already exists */
){
  int iDb;              /* The database the table is being created in */
  Table *pTable;        /* The new virtual table */
  sqlite3 *db;          /* Database connection */

  sqlite3StartTable(pParse, pName1, pName2, 0, 0, 1, ifNotExists);
  pTable = pParse->pNewTable;
  if( pTable==0 ) return;
  assert( 0==pTable->pIndex );

  db = pParse->db;
  iDb = sqlite3SchemaToIndex(db, pTable->pSchema);
  assert( iDb>=0 );

/*
** This routine takes the module argument that has been accumulating
** in pParse->zArg[] and appends it to the list of arguments on the
** virtual table currently under construction in pParse->pTable.
*/
static void addArgumentToVtab(Parse *pParse){
  if( pParse->sArg.z && pParse->pNewTable ){
    const char *z = (const char*)pParse->sArg.z;
    int n = pParse->sArg.n;
    sqlite3 *db = pParse->db;
    addModuleArgument(db, pParse->pNewTable, sqlite3DbStrNDup(db, z, n));
  }
}

      wsFlags |= WHERE_ROWID_RANGE|WHERE_COLUMN_RANGE|WHERE_ORDERBY;
      wsFlags |= (rev ? WHERE_REVERSE : 0);
    }

    /* If there is a DISTINCT qualifier and this index will scan rows in
    ** order of the DISTINCT expressions, clear bDist and set the appropriate
    ** flags in wsFlags. */
    if( isDistinctIndex(pParse, pWC, pProbe, iCur, pDistinct, nEq)
     && (wsFlags & WHERE_COLUMN_IN)==0
    ){
      bDist = 0;
      wsFlags |= WHERE_ROWID_RANGE|WHERE_COLUMN_RANGE|WHERE_DISTINCT;
    }

    /* If currently calculating the cost of using an index (not the IPK
    ** index), determine if all required column data may be obtained without 
    ** using the main table (i.e. if the index is a covering

** Generate code for the start of the iLevel-th loop in the WHERE clause
** implementation described by pWInfo.
*/
static Bitmask codeOneLoopStart(
  WhereInfo *pWInfo,   /* Complete information about the WHERE clause */
  int iLevel,          /* Which level of pWInfo->a[] should be coded */
  u16 wctrlFlags,      /* One of the WHERE_* flags defined in sqliteInt.h */
  Bitmask notReady     /* Which tables are currently available */

){
  int j, k;            /* Loop counters */
  int iCur;            /* The VDBE cursor for the table */
  int addrNxt;         /* Where to jump to continue with the next IN case */
  int omitTable;       /* True if we use the index only */
  int bRev;            /* True if we need to scan in reverse order */
  WhereLevel *pLevel;  /* The where level to be coded */

    }
    iRetInit = sqlite3VdbeAddOp2(v, OP_Integer, 0, regReturn);

    /* If the original WHERE clause is z of the form:  (x1 OR x2 OR ...) AND y
    ** Then for every term xN, evaluate as the subexpression: xN AND z
    ** That way, terms in y that are factored into the disjunction will
    ** be picked up by the recursive calls to sqlite3WhereBegin() below.
    **
    ** Actually, each subexpression is converted to "xN AND w" where w is
    ** the "interesting" terms of z - terms that did not originate in the
    ** ON or USING clause of a LEFT JOIN, and terms that are usable as 
    ** indices.
    */
    if( pWC->nTerm>1 ){
      int iTerm;
      for(iTerm=0; iTerm<pWC->nTerm; iTerm++){
        Expr *pExpr = pWC->a[iTerm].pExpr;
        if( ExprHasProperty(pExpr, EP_FromJoin) ) continue;
        if( pWC->a[iTerm].wtFlags & (TERM_VIRTUAL|TERM_ORINFO) ) continue;
        if( (pWC->a[iTerm].eOperator & WO_ALL)==0 ) continue;
        pExpr = sqlite3ExprDup(pParse->db, pExpr, 0);
        pAndExpr = sqlite3ExprAnd(pParse->db, pAndExpr, pExpr);
      }
      if( pAndExpr ){
        pAndExpr = sqlite3PExpr(pParse, TK_AND, 0, pAndExpr, 0);
      }
    }

    for(ii=0; ii<pOrWc->nTerm; ii++){
      WhereTerm *pOrTerm = &pOrWc->a[ii];
      if( pOrTerm->leftCursor==iCur || pOrTerm->eOperator==WO_AND ){
        WhereInfo *pSubWInfo;          /* Info for single OR-term scan */
        Expr *pOrExpr = pOrTerm->pExpr;

          if( pSubWInfo->untestedTerms ) untestedTerms = 1;

          /* Finish the loop through table entries that match term pOrTerm. */
          sqlite3WhereEnd(pSubWInfo);
        }
      }
    }
    if( pAndExpr ){
      pAndExpr->pLeft = 0;
      sqlite3ExprDelete(pParse->db, pAndExpr);
    }
    sqlite3VdbeChangeP1(v, iRetInit, sqlite3VdbeCurrentAddr(v));
    sqlite3VdbeAddOp2(v, OP_Goto, 0, pLevel->addrBrk);
    sqlite3VdbeResolveLabel(v, iLoopBody);

    if( pWInfo->nLevel>1 ) sqlite3StackFree(pParse->db, pOrTab);
    if( !untestedTerms ) disableTerm(pLevel, pTerm);
  }else

  ** loop below generates code for a single nested loop of the VM
  ** program.
  */
  notReady = ~(Bitmask)0;
  for(i=0; i<nTabList; i++){
    pLevel = &pWInfo->a[i];
    explainOneScan(pParse, pTabList, pLevel, i, pLevel->iFrom, wctrlFlags);
    notReady = codeOneLoopStart(pWInfo, i, wctrlFlags, notReady);
    pWInfo->iContinue = pLevel->addrCont;
  }

#ifdef SQLITE_TEST  /* For testing and debugging use only */
  /* Record in the query plan information about the current table
  ** and the index used to access it (if any).  If the table itself
  ** is not used, its name is just '{}'.  If no index is used

struct TrigEvent { int a; IdList * b; };

/*
** An instance of this structure holds the ATTACH key and the key type.
*/
struct AttachKey { int type;  Token key; };

/*
** One or more VALUES claues
*/
struct ValueList {
  ExprList *pList;
  Select *pSelect;
};


  /* This is a utility routine used to set the ExprSpan.zStart and
  ** ExprSpan.zEnd values of pOut so that the span covers the complete
  ** range of text beginning with pStart and going to the end of pEnd.
  */
  static void spanSet(ExprSpan *pOut, Token *pStart, Token *pEnd){
    pOut->zStart = pStart->z;

**    sqlite3ParserARG_FETCH     Code to extract %extra_argument from yypParser
**    YYNSTATE           the combined number of states.
**    YYNRULE            the number of rules in the grammar
**    YYERRORSYMBOL      is the code number of the error symbol.  If not
**                       defined, then do no error processing.
*/
#define YYCODETYPE unsigned char
#define YYNOCODE 251
#define YYACTIONTYPE unsigned short int
#define YYWILDCARD 67
#define sqlite3ParserTOKENTYPE Token
typedef union {
  int yyinit;
  sqlite3ParserTOKENTYPE yy0;

  struct LimitVal yy64;
  Expr* yy122;
  Select* yy159;
  IdList* yy180;
  struct {int value; int mask;} yy207;
  u8 yy258;
  struct LikeOp yy318;
  TriggerStep* yy327;
  ExprSpan yy342;
  SrcList* yy347;
  int yy392;
  struct TrigEvent yy410;
  ExprList* yy442;
  struct ValueList yy487;
} YYMINORTYPE;
#ifndef YYSTACKDEPTH
#define YYSTACKDEPTH 100
#endif
#define sqlite3ParserARG_SDECL Parse *pParse;
#define sqlite3ParserARG_PDECL ,Parse *pParse
#define sqlite3ParserARG_FETCH Parse *pParse = yypParser->pParse
#define sqlite3ParserARG_STORE yypParser->pParse = pParse
#define YYNSTATE 629
#define YYNRULE 327
#define YYFALLBACK 1
#define YY_NO_ACTION      (YYNSTATE+YYNRULE+2)
#define YY_ACCEPT_ACTION  (YYNSTATE+YYNRULE+1)
#define YY_ERROR_ACTION   (YYNSTATE+YYNRULE)

/* The yyzerominor constant is used to initialize instances of
** YYMINORTYPE objects to zero. */

**                     yy_action.  Used to detect hash collisions.
**  yy_shift_ofst[]    For each state, the offset into yy_action for
**                     shifting terminals.
**  yy_reduce_ofst[]   For each state, the offset into yy_action for
**                     shifting non-terminals after a reduce.
**  yy_default[]       Default action for each state.
*/
#define YY_ACTTAB_COUNT (1580)
static const YYACTIONTYPE yy_action[] = {
 /*     0 */   310,  328,  574,  573,   15,  172,  187,  596,   56,   56,
 /*    10 */    56,   56,   49,   54,   54,   54,   54,   53,   53,   52,
 /*    20 */    52,   52,   51,  234,  622,  621,  626,  622,  621,  299,
 /*    30 */   589,  583,   56,   56,   56,   56,  236,   54,   54,   54,
 /*    40 */    54,   53,   53,   52,   52,   52,   51,  234,  351,   57,
 /*    50 */    58,   48,  581,  580,  582,  582,   55,   55,   56,   56,
 /*    60 */    56,   56,  570,   54,   54,   54,   54,   53,   53,   52,
 /*    70 */    52,   52,   51,  234,  310,  596,  326,  607,  233,  232,
 /*    80 */    33,   54,   54,   54,   54,   53,   53,   52,   52,   52,
 /*    90 */    51,  234,  619,  618,  326,  619,  618,  166,  605,  492,
 /*   100 */   381,  378,  377,  235,  589,  583,  554,  495,    1,   59,
 /*   110 */    19,  376,  622,  621,   53,   53,   52,   52,   52,   51,
 /*   120 */   234,  571,  571,   57,   58,   48,  581,  580,  582,  582,
 /*   130 */    55,   55,   56,   56,   56,   56,  215,   54,   54,   54,
 /*   140 */    54,   53,   53,   52,   52,   52,   51,  234,  310,  224,
 /*   150 */    50,   47,  147,  177,  139,  281,  384,  276,  383,  169,
 /*   160 */   408,  553,  578,  578,  622,  621,  272,  224,  439,  550,
 /*   170 */   552,  410,  139,  281,  384,  276,  383,  169,  589,  583,
 /*   180 */   619,  618,  280,  620,  272,  195,  413,  309,  440,  441,
 /*   190 */   567,  491,  214,  279,  560,  600,   92,   57,   58,   48,
 /*   200 */   581,  580,  582,  582,   55,   55,   56,   56,   56,   56,
 /*   210 */   559,   54,   54,   54,   54,   53,   53,   52,   52,   52,
 /*   220 */    51,  234,  310,  464,  233,  232,  558,  133,  519,   50,
 /*   230 */    47,  147,  619,  618,  565,  436,  397,  515,  514,  518,
 /*   240 */   410,  387,  438,  389,  437,  622,  621,  442,  570,  433,
 /*   250 */   203,  390,  589,  583,    6,  413,  166,  670,  250,  381,
 /*   260 */   378,  377,  525,  190,  600,   92,  594,  571,  571,  465,
 /*   270 */   376,   57,   58,   48,  581,  580,  582,  582,   55,   55,
 /*   280 */    56,   56,   56,   56,  599,   54,   54,   54,   54,   53,
 /*   290 */    53,   52,   52,   52,   51,  234,  310,  592,  592,  592,
 /*   300 */   490,  182,  247,  548,  249,  397,  273,  410,    7,  439,
 /*   310 */   398,  606,   67,  619,  618,  620,  472,  256,  347,  255,
 /*   320 */   473,  620,  413,  576,  620,   65,  589,  583,  236,  440,
 /*   330 */   336,  600,   92,   68,  364,  192,  481,  622,  621,  547,
 /*   340 */   622,  621,  560,  323,  207,   57,   58,   48,  581,  580,
 /*   350 */   582,  582,   55,   55,   56,   56,   56,   56,  559,   54,
 /*   360 */    54,   54,   54,   53,   53,   52,   52,   52,   51,  234,
 /*   370 */   310,  410,  397,  146,  558,  531,  401,  348,  599,  166,
 /*   380 */   248,  204,  381,  378,  377,  541,  413,  171,  337,  570,
 /*   390 */   622,  621,   40,  376,   38,  600,   74,  465,  548,  490,
 /*   400 */   589,  583,  532,  350,  579,  619,  618,  297,  619,  618,
 /*   410 */   480,   67,  470,   39,  620,  599,  406,  574,  573,   57,
 /*   420 */    58,   48,  581,  580,  582,  582,   55,   55,   56,   56,
 /*   430 */    56,   56,  577,   54,   54,   54,   54,   53,   53,   52,
 /*   440 */    52,   52,   51,  234,  310,  256,  347,  255,  530,   52,
 /*   450 */    52,   52,   51,  234,  345,  564,  236,  386,  619,  618,
 /*   460 */   957,  185,  418,    2,  408,  410,  578,  578,  198,  197,
 /*   470 */   196,  499,  183,  167,  589,  583,  671,  570,  505,  506,
 /*   480 */   413,  267,  601,  672,  546,  208,  602,   36,  601,  600,
 /*   490 */    91,  468,  602,   57,   58,   48,  581,  580,  582,  582,
 /*   500 */    55,   55,   56,   56,   56,   56,  202,   54,   54,   54,
 /*   510 */    54,   53,   53,   52,   52,   52,   51,  234,  310,  599,
 /*   520 */   157,  408,  527,  578,  578,  263,  490,  265,  410,  873,
 /*   530 */   410,  474,  474,  366,  373,  410,  504,  428,   67,  290,
 /*   540 */   599,  620,  352,  413,  408,  413,  578,  578,  589,  583,
 /*   550 */   413,  382,  600,   92,  600,   16,  543,   62,  503,  600,
 /*   560 */    92,  408,  346,  578,  578,  168,   45,   57,   58,   48,
 /*   570 */   581,  580,  582,  582,   55,   55,   56,   56,   56,   56,
 /*   580 */   200,   54,   54,   54,   54,   53,   53,   52,   52,   52,
 /*   590 */    51,  234,  310,  393,  395,  534,  510,  617,  616,  615,
 /*   600 */   318,  314,  172,   66,  596,  410,  338,  596,  324,  571,
 /*   610 */   571,   50,   47,  147,  599,  629,  627,  330,  539,  315,
 /*   620 */   413,   30,  589,  583,  272,  236,  199,  144,  176,  600,
 /*   630 */    73,  420,  947,  620,  947,  420,  946,  351,  946,  175,
 /*   640 */   596,   57,   58,   48,  581,  580,  582,  582,   55,   55,
 /*   650 */    56,   56,   56,   56,  410,   54,   54,   54,   54,   53,
 /*   660 */    53,   52,   52,   52,   51,  234,  310,  261,  410,  413,
 /*   670 */   269,  208,  596,  363,  410,  596,  424,  360,  600,   69,
 /*   680 */   424,  327,  620,  413,   50,   47,  147,  410,  358,  413,
 /*   690 */   575,  553,  600,   94,  483,  509,  589,  583,  600,   97,
 /*   700 */   552,  484,  413,  620,  188,  599,  551,  563,  596,  566,
 /*   710 */   334,  600,   95,  205,  201,   57,   58,   48,  581,  580,
 /*   720 */   582,  582,   55,   55,   56,   56,   56,   56,  352,   54,
 /*   730 */    54,   54,   54,   53,   53,   52,   52,   52,   51,  234,
 /*   740 */   310,  410,  261,  410,  167,   22,  356,  599,  359,  623,
 /*   750 */    50,   47,  147,  548,  357,  562,  413,  620,  413,  332,
 /*   760 */   523,  270,  410,  167,  620,  600,  104,  600,  103,  603,
 /*   770 */   589,  583,  339,  539,  304,  423,  222,  413,  174,  304,
 /*   780 */   422,  561,  567,  405,  214,  260,  600,  106,  620,   57,
 /*   790 */    58,   48,  581,  580,  582,  582,   55,   55,   56,   56,
 /*   800 */    56,   56,  410,   54,   54,   54,   54,   53,   53,   52,
 /*   810 */    52,   52,   51,  234,  310,  410,  557,  413,  410,  421,
 /*   820 */   273,   35,  512,  146,  421,   12,  600,  107,  213,  144,
 /*   830 */   413,  410,   32,  413,  410,  620,  365,  353,  358,  600,
 /*   840 */   134,   11,  600,  135,  589,  583,  413,   21,  548,  413,
 /*   850 */   316,  148,  620,  620,  170,  600,   98,  223,  600,  102,
 /*   860 */   374,  168,  167,   57,   58,   48,  581,  580,  582,  582,
 /*   870 */    55,   55,   56,   56,   56,   56,  410,   54,   54,   54,
 /*   880 */    54,   53,   53,   52,   52,   52,   51,  234,  310,  410,
 /*   890 */   273,  413,  410,  273,  212,  469,  410,  167,  628,    2,
 /*   900 */   600,  101,  545,  221,  413,  620,  130,  413,  620,  410,
 /*   910 */   539,  413,  537,  600,   93,  315,  600,  100,  589,  583,
 /*   920 */   600,   77,  425,  305,  413,  620,  254,  322,  599,  458,
 /*   930 */   320,  171,  543,  600,   96,  521,  520,   57,   58,   48,
 /*   940 */   581,  580,  582,  582,   55,   55,   56,   56,   56,   56,
 /*   950 */   410,   54,   54,   54,   54,   53,   53,   52,   52,   52,
 /*   960 */    51,  234,  310,  410,  273,  413,  410,  457,  358,   35,
 /*   970 */   426,  230,  306,  319,  600,  138,  467,  520,  413,  620,
 /*   980 */   143,  413,  410,  620,  410,  353,  529,  600,  137,  142,
 /*   990 */   600,  136,  589,  583,  604,  261,  528,  413,  229,  413,
 /*  1000 */   620,  321,  495,   28,  543,  543,  600,   76,  600,   90,
 /*  1010 */   620,   57,   46,   48,  581,  580,  582,  582,   55,   55,
 /*  1020 */    56,   56,   56,   56,  410,   54,   54,   54,   54,   53,
 /*  1030 */    53,   52,   52,   52,   51,  234,  310,  261,  451,  413,
 /*  1040 */   410,  211,  611,  285,  283,  610,  609,  502,  600,   89,
 /*  1050 */   380,  217,  620,  128,  140,  413,  220,  620,  410,  409,
 /*  1060 */   620,  620,  588,  587,  600,   75,  589,  583,  271,  620,
 /*  1070 */    51,  234,  127,  413,  620,  599,  627,  330,   27,  375,
 /*  1080 */   449,  279,  600,   88,  585,  584,   58,   48,  581,  580,
 /*  1090 */   582,  582,   55,   55,   56,   56,   56,   56,  410,   54,
 /*  1100 */    54,   54,   54,   53,   53,   52,   52,   52,   51,  234,
 /*  1110 */   310,  586,  410,  413,  410,  261,  593,  165,  399,  556,
 /*  1120 */   126,  371,  600,   87,  478,  186,  123,  413,  367,  413,
 /*  1130 */   620,  620,  410,  620,  620,  410,  600,   99,  600,   86,
 /*  1140 */   589,  583,  475,  122,  258,  171,  471,  413,  160,  121,
 /*  1150 */   413,   14,  159,  463,   25,   24,  600,   17,  448,  600,
 /*  1160 */    85,   48,  581,  580,  582,  582,   55,   55,   56,   56,
 /*  1170 */    56,   56,  158,   54,   54,   54,   54,   53,   53,   52,
 /*  1180 */    52,   52,   51,  234,   44,  404,  261,    3,  544,  261,
 /*  1190 */   540,  414,  621,  460,  119,  118,  538,  275,   10,  349,
 /*  1200 */     4,  620,  407,  620,  620,  620,  116,   44,  404,  410,
 /*  1210 */     3,  620,  620,  410,  414,  621,  456,  454,  252,  450,
 /*  1220 */   508,  402,  111,  109,  413,  407,  155,  444,  413,  447,
 /*  1230 */   435,  565,  219,  600,   84,  620,  108,  600,   83,   64,
 /*  1240 */   434,  417,  625,  150,  402,  333,  410,  237,  238,  124,
 /*  1250 */   274,   41,   42,  533,  565,  206,  189,  261,   43,  412,
 /*  1260 */   411,  413,  261,  594,  488,  620,  329,  149,  419,  268,
 /*  1270 */   600,   72,  620,  266,   41,   42,  181,  620,  410,  620,
 /*  1280 */   105,   43,  412,  411,  620,  624,  594,  614,  620,  599,
 /*  1290 */   228,  125,  313,  413,  592,  592,  592,  591,  590,   13,
 /*  1300 */   218,  410,  600,   71,  236,  244,   44,  404,  264,    3,
 /*  1310 */   312,  613,  340,  414,  621,  180,  413,  592,  592,  592,
 /*  1320 */   591,  590,   13,  620,  407,  600,   82,  410,  416,   34,
 /*  1330 */   404,  410,    3,  410,  262,  410,  414,  621,  612,  331,
 /*  1340 */   178,  415,  413,  402,    8,  236,  413,  407,  413,  620,
 /*  1350 */   413,  600,   81,  565,  257,  600,   80,  600,   70,  600,
 /*  1360 */    18,  598,  361,  462,  461,   30,  402,  294,   31,  620,
 /*  1370 */   293,  354,  251,   41,   42,  410,  565,  620,  620,  620,
 /*  1380 */    43,  412,  411,  453,  396,  594,  620,  620,  394,   61,
 /*  1390 */   413,  292,  443,  622,  621,  243,   41,   42,  620,  600,
 /*  1400 */    79,  597,  291,   43,  412,  411,   60,  620,  594,  240,
 /*  1410 */   620,  410,  231,   37,  555,  173,  592,  592,  592,  591,
 /*  1420 */   590,   13,  216,  239,  620,  184,  413,  302,  301,  300,
 /*  1430 */   179,  298,  388,  565,  452,  600,   78,  286,  620,  592,
 /*  1440 */   592,  592,  591,  590,   13,  429,   29,  413,  151,  289,
 /*  1450 */   242,  145,  392,  194,  193,  288,  600,    9,  542,  241,
 /*  1460 */   620,  525,  391,  284,  620,  594,  620,  620,  522,  536,
 /*  1470 */   620,  535,  153,  385,  465,  516,  282,  325,  154,  517,
 /*  1480 */   277,  152,  512,  511,  513,  129,  226,  308,  487,  486,
 /*  1490 */   485,  164,  372,  493,  307,  227,  592,  592,  592,  225,
 /*  1500 */   479,  163,  368,  370,  162,  476,  210,  477,   26,  259,
 /*  1510 */   161,  466,  362,  141,  132,  120,  117,  455,  156,  115,
 /*  1520 */   344,  343,  256,  342,  245,  114,  113,  446,  311,  112,
 /*  1530 */    23,  317,  432,  236,  131,  431,  110,  430,   20,  427,
 /*  1540 */   608,  595,  295,   63,  379,  287,  509,  191,  278,  403,
 /*  1550 */   572,  569,  497,  498,  496,  494,  335,  459,  445,  303,
 /*  1560 */   296,  246,  341,  355,    5,  568,  369,  507,  253,  549,
 /*  1570 */   526,  209,  400,  501,  500,  524,  234,  958,  489,  482,
};
static const YYCODETYPE yy_lookahead[] = {
 /*     0 */    19,  169,  170,  171,   22,   24,   24,   26,   77,   78,
 /*    10 */    79,   80,   81,   82,   83,   84,   85,   86,   87,   88,
 /*    20 */    89,   90,   91,   92,   26,   27,    1,   26,   27,   15,
 /*    30 */    49,   50,   77,   78,   79,   80,  116,   82,   83,   84,
 /*    40 */    85,   86,   87,   88,   89,   90,   91,   92,  128,   68,
 /*    50 */    69,   70,   71,   72,   73,   74,   75,   76,   77,   78,
 /*    60 */    79,   80,  230,   82,   83,   84,   85,   86,   87,   88,
 /*    70 */    89,   90,   91,   92,   19,   94,   19,   23,   86,   87,
 /*    80 */    25,   82,   83,   84,   85,   86,   87,   88,   89,   90,
 /*    90 */    91,   92,   94,   95,   19,   94,   95,   96,  172,  173,
 /*   100 */    99,  100,  101,  197,   49,   50,  177,  181,   22,   54,
 /*   110 */   204,  110,   26,   27,   86,   87,   88,   89,   90,   91,
 /*   120 */    92,  129,  130,   68,   69,   70,   71,   72,   73,   74,
 /*   130 */    75,   76,   77,   78,   79,   80,   22,   82,   83,   84,
 /*   140 */    85,   86,   87,   88,   89,   90,   91,   92,   19,   92,
 /*   150 */   221,  222,  223,   96,   97,   98,   99,  100,  101,  102,
 /*   160 */   112,   32,  114,  115,   26,   27,  109,   92,  150,   25,
 /*   170 */    41,  150,   97,   98,   99,  100,  101,  102,   49,   50,
 /*   180 */    94,   95,   98,  165,  109,   25,  165,  163,  170,  171,
 /*   190 */   166,  167,  168,  109,   12,  174,  175,   68,   69,   70,
 /*   200 */    71,   72,   73,   74,   75,   76,   77,   78,   79,   80,
 /*   210 */    28,   82,   83,   84,   85,   86,   87,   88,   89,   90,
 /*   220 */    91,   92,   19,   11,   86,   87,   44,   24,   46,  221,
 /*   230 */   222,  223,   94,   95,   66,   97,  215,    7,    8,   57,
 /*   240 */   150,  220,  104,   19,  106,   26,   27,  229,  230,  241,
 /*   250 */   160,   27,   49,   50,   22,  165,   96,  118,   16,   99,
 /*   260 */   100,  101,   94,  119,  174,  175,   98,  129,  130,   57,
 /*   270 */   110,   68,   69,   70,   71,   72,   73,   74,   75,   76,
 /*   280 */    77,   78,   79,   80,  194,   82,   83,   84,   85,   86,
 /*   290 */    87,   88,   89,   90,   91,   92,   19,  129,  130,  131,
 /*   300 */   150,   23,   60,   25,   62,  215,  150,  150,   76,  150,
 /*   310 */   220,  161,  162,   94,   95,  165,   30,  105,  106,  107,
 /*   320 */    34,  165,  165,   23,  165,   25,   49,   50,  116,  170,
 /*   330 */   171,  174,  175,   22,   48,  185,  186,   26,   27,  120,
 /*   340 */    26,   27,   12,  187,  160,   68,   69,   70,   71,   72,
 /*   350 */    73,   74,   75,   76,   77,   78,   79,   80,   28,   82,
 /*   360 */    83,   84,   85,   86,   87,   88,   89,   90,   91,   92,
 /*   370 */    19,  150,  215,   95,   44,   23,   46,  220,  194,   96,
 /*   380 */   138,  160,   99,  100,  101,   23,  165,   25,  229,  230,
 /*   390 */    26,   27,  135,  110,  137,  174,  175,   57,  120,  150,
 /*   400 */    49,   50,   88,  219,  113,   94,   95,  158,   94,   95,
 /*   410 */   161,  162,   21,  136,  165,  194,  169,  170,  171,   68,
 /*   420 */    69,   70,   71,   72,   73,   74,   75,   76,   77,   78,
 /*   430 */    79,   80,   23,   82,   83,   84,   85,   86,   87,   88,
 /*   440 */    89,   90,   91,   92,   19,  105,  106,  107,   23,   88,
 /*   450 */    89,   90,   91,   92,   63,   23,  116,   88,   94,   95,
 /*   460 */   142,  143,  144,  145,  112,  150,  114,  115,  105,  106,
 /*   470 */   107,   23,   23,   25,   49,   50,  118,  230,   97,   98,
 /*   480 */   165,   16,  113,  118,  120,  160,  117,  136,  113,  174,
 /*   490 */   175,  100,  117,   68,   69,   70,   71,   72,   73,   74,
 /*   500 */    75,   76,   77,   78,   79,   80,  160,   82,   83,   84,
 /*   510 */    85,   86,   87,   88,   89,   90,   91,   92,   19,  194,
 /*   520 */    25,  112,   23,  114,  115,   60,  150,   62,  150,  138,
 /*   530 */   150,  105,  106,  107,   19,  150,   36,  161,  162,  224,
 /*   540 */   194,  165,  217,  165,  112,  165,  114,  115,   49,   50,
 /*   550 */   165,   51,  174,  175,  174,  175,  166,  232,   58,  174,
 /*   560 */   175,  112,  237,  114,  115,   50,   22,   68,   69,   70,
 /*   570 */    71,   72,   73,   74,   75,   76,   77,   78,   79,   80,
 /*   580 */   160,   82,   83,   84,   85,   86,   87,   88,   89,   90,
 /*   590 */    91,   92,   19,  215,  214,  205,   23,    7,    8,    9,
 /*   600 */   215,  155,   24,   22,   26,  150,   97,   26,  108,  129,
 /*   610 */   130,  221,  222,  223,  194,    0,    1,    2,  150,  104,
 /*   620 */   165,  126,   49,   50,  109,  116,  206,  207,  118,  174,
 /*   630 */   175,   22,   23,  165,   25,   22,   23,  128,   25,  118,
 /*   640 */    26,   68,   69,   70,   71,   72,   73,   74,   75,   76,
 /*   650 */    77,   78,   79,   80,  150,   82,   83,   84,   85,   86,
 /*   660 */    87,   88,   89,   90,   91,   92,   19,  150,  150,  165,
 /*   670 */    23,  160,   94,  227,  150,   94,   67,  231,  174,  175,
 /*   680 */    67,  213,  165,  165,  221,  222,  223,  150,  150,  165,
 /*   690 */    23,   32,  174,  175,  181,  182,   49,   50,  174,  175,
 /*   700 */    41,  188,  165,  165,   22,  194,  177,   11,   94,   23,
 /*   710 */   193,  174,  175,  160,   22,   68,   69,   70,   71,   72,
 /*   720 */    73,   74,   75,   76,   77,   78,   79,   80,  217,   82,
 /*   730 */    83,   84,   85,   86,   87,   88,   89,   90,   91,   92,
 /*   740 */    19,  150,  150,  150,   25,   24,   19,  194,  237,  150,
 /*   750 */   221,  222,  223,   25,   27,   23,  165,  165,  165,  242,
 /*   760 */   165,   23,  150,   25,  165,  174,  175,  174,  175,  174,
 /*   770 */    49,   50,  219,  150,   22,   23,  238,  165,   25,   22,
 /*   780 */    23,   23,  166,  167,  168,  193,  174,  175,  165,   68,
 /*   790 */    69,   70,   71,   72,   73,   74,   75,   76,   77,   78,
 /*   800 */    79,   80,  150,   82,   83,   84,   85,   86,   87,   88,
 /*   810 */    89,   90,   91,   92,   19,  150,   23,  165,  150,   67,
 /*   820 */   150,   25,  103,   95,   67,   35,  174,  175,  206,  207,
 /*   830 */   165,  150,   25,  165,  150,  165,  213,  150,  150,  174,
 /*   840 */   175,   35,  174,  175,   49,   50,  165,   52,  120,  165,
 /*   850 */   245,  246,  165,  165,   35,  174,  175,  187,  174,  175,
 /*   860 */    23,   50,   25,   68,   69,   70,   71,   72,   73,   74,
 /*   870 */    75,   76,   77,   78,   79,   80,  150,   82,   83,   84,
 /*   880 */    85,   86,   87,   88,   89,   90,   91,   92,   19,  150,
 /*   890 */   150,  165,  150,  150,  160,   23,  150,   25,  144,  145,
 /*   900 */   174,  175,  120,  216,  165,  165,   22,  165,  165,  150,
 /*   910 */   150,  165,   27,  174,  175,  104,  174,  175,   49,   50,
 /*   920 */   174,  175,  247,  248,  165,  165,  238,  187,  194,   23,
 /*   930 */   187,   25,  166,  174,  175,  190,  191,   68,   69,   70,
 /*   940 */    71,   72,   73,   74,   75,   76,   77,   78,   79,   80,
 /*   950 */   150,   82,   83,   84,   85,   86,   87,   88,   89,   90,
 /*   960 */    91,   92,   19,  150,  150,  165,  150,   23,  150,   25,
 /*   970 */    23,  205,   25,  213,  174,  175,  190,  191,  165,  165,
 /*   980 */   118,  165,  150,  165,  150,  150,   23,  174,  175,   39,
 /*   990 */   174,  175,   49,   50,  173,  150,   23,  165,   52,  165,
 /*  1000 */   165,  187,  181,   22,  166,  166,  174,  175,  174,  175,
 /*  1010 */   165,   68,   69,   70,   71,   72,   73,   74,   75,   76,
 /*  1020 */    77,   78,   79,   80,  150,   82,   83,   84,   85,   86,
 /*  1030 */    87,   88,   89,   90,   91,   92,   19,  150,  193,  165,
 /*  1040 */   150,  160,  150,  205,  205,  150,  150,   29,  174,  175,
 /*  1050 */    52,  216,  165,   22,  150,  165,  238,  165,  150,  150,
 /*  1060 */   165,  165,   49,   50,  174,  175,   49,   50,   23,  165,
 /*  1070 */    91,   92,   22,  165,  165,  194,    1,    2,   22,   52,
 /*  1080 */   193,  109,  174,  175,   71,   72,   69,   70,   71,   72,
 /*  1090 */    73,   74,   75,   76,   77,   78,   79,   80,  150,   82,
 /*  1100 */    83,   84,   85,   86,   87,   88,   89,   90,   91,   92,
 /*  1110 */    19,   98,  150,  165,  150,  150,  150,  102,  150,  150,
 /*  1120 */    22,   19,  174,  175,   20,   24,  104,  165,   43,  165,
 /*  1130 */   165,  165,  150,  165,  165,  150,  174,  175,  174,  175,
 /*  1140 */    49,   50,   59,   53,  138,   25,   53,  165,  104,   22,
 /*  1150 */   165,    5,  118,    1,   76,   76,  174,  175,  193,  174,
 /*  1160 */   175,   70,   71,   72,   73,   74,   75,   76,   77,   78,
 /*  1170 */    79,   80,   35,   82,   83,   84,   85,   86,   87,   88,
 /*  1180 */    89,   90,   91,   92,   19,   20,  150,   22,  150,  150,
 /*  1190 */   150,   26,   27,   27,  108,  127,  150,  150,   22,   25,
 /*  1200 */    22,  165,   37,  165,  165,  165,  119,   19,   20,  150,
 /*  1210 */    22,  165,  165,  150,   26,   27,   23,    1,   16,   20,
 /*  1220 */   150,   56,  119,  108,  165,   37,  121,  128,  165,  193,
 /*  1230 */    23,   66,  193,  174,  175,  165,  127,  174,  175,   16,
 /*  1240 */    23,  146,  147,   15,   56,   65,  150,  152,  140,  154,
 /*  1250 */   150,   86,   87,   88,   66,  160,   22,  150,   93,   94,
 /*  1260 */    95,  165,  150,   98,  150,  165,    3,  246,    4,  150,
 /*  1270 */   174,  175,  165,  150,   86,   87,    6,  165,  150,  165,
 /*  1280 */   164,   93,   94,   95,  165,  149,   98,  149,  165,  194,
 /*  1290 */   180,  180,  249,  165,  129,  130,  131,  132,  133,  134,
 /*  1300 */   193,  150,  174,  175,  116,  193,   19,   20,  150,   22,
 /*  1310 */   249,  149,  217,   26,   27,  151,  165,  129,  130,  131,
 /*  1320 */   132,  133,  134,  165,   37,  174,  175,  150,  149,   19,
 /*  1330 */    20,  150,   22,  150,  150,  150,   26,   27,   13,  244,
 /*  1340 */   151,  159,  165,   56,   25,  116,  165,   37,  165,  165,
 /*  1350 */   165,  174,  175,   66,  150,  174,  175,  174,  175,  174,
 /*  1360 */   175,  194,  150,  150,  150,  126,   56,  199,  124,  165,
 /*  1370 */   200,  150,  150,   86,   87,  150,   66,  165,  165,  165,
 /*  1380 */    93,   94,   95,  150,  122,   98,  165,  165,  123,   22,
 /*  1390 */   165,  201,  150,   26,   27,  150,   86,   87,  165,  174,
 /*  1400 */   175,  203,  202,   93,   94,   95,  125,  165,   98,  150,
 /*  1410 */   165,  150,  225,  135,  157,  118,  129,  130,  131,  132,
 /*  1420 */   133,  134,    5,  150,  165,  157,  165,   10,   11,   12,
 /*  1430 */    13,   14,  150,   66,   17,  174,  175,  210,  165,  129,
 /*  1440 */   130,  131,  132,  133,  134,  150,  104,  165,   31,  150,
 /*  1450 */    33,  150,  150,   86,   87,  150,  174,  175,  211,   42,
 /*  1460 */   165,   94,  121,  210,  165,   98,  165,  165,  176,  211,
 /*  1470 */   165,  211,   55,  104,   57,  184,  210,   47,   61,  176,
 /*  1480 */   176,   64,  103,  176,  178,   22,   92,  179,  176,  176,
 /*  1490 */   176,  156,   18,  184,  179,  228,  129,  130,  131,  228,
 /*  1500 */   157,  156,   45,  157,  156,  236,  157,  157,  135,  235,
 /*  1510 */   156,  189,  157,   68,  218,  189,   22,  199,  156,  192,
 /*  1520 */   157,   18,  105,  106,  107,  192,  192,  199,  111,  192,
 /*  1530 */   240,  157,   40,  116,  218,  157,  189,  157,  240,   38,
 /*  1540 */   153,  166,  198,  243,  178,  209,  182,  196,  177,  226,
 /*  1550 */   230,  230,  166,  177,  177,  166,  139,  199,  199,  148,
 /*  1560 */   195,  209,  209,  239,  196,  166,  234,  183,  239,  208,
 /*  1570 */   174,  233,  191,  183,  183,  174,   92,  250,  186,  186,
};
#define YY_SHIFT_USE_DFLT (-81)
#define YY_SHIFT_COUNT (417)
#define YY_SHIFT_MIN   (-80)
#define YY_SHIFT_MAX   (1503)
static const short yy_shift_ofst[] = {
 /*     0 */  1075, 1188, 1417, 1188, 1287, 1287,  138,  138,    1,  -19,
 /*    10 */  1287, 1287, 1287, 1287,  340,   -2,  129,  129,  795, 1165,
 /*    20 */  1287, 1287, 1287, 1287, 1287, 1287, 1287, 1287, 1287, 1287,
 /*    30 */  1287, 1287, 1287, 1287, 1287, 1287, 1287, 1287, 1287, 1287,
 /*    40 */  1287, 1287, 1287, 1287, 1287, 1287, 1287, 1287, 1310, 1287,
 /*    50 */  1287, 1287, 1287, 1287, 1287, 1287, 1287, 1287, 1287, 1287,
 /*    60 */  1287, 1287,  212,   -2,   -2,   -8,   -8,  614, 1229,   55,
 /*    70 */   721,  647,  573,  499,  425,  351,  277,  203,  869,  869,
 /*    80 */   869,  869,  869,  869,  869,  869,  869,  869,  869,  869,
 /*    90 */   869,  869,  869,  943,  869, 1017, 1091, 1091,  -69,  -45,
 /*   100 */   -45,  -45,  -45,  -45,   -1,   57,   28,  361,   -2,   -2,
 /*   110 */    -2,   -2,   -2,   -2,   -2,   -2,   -2,   -2,   -2,   -2,
 /*   120 */    -2,   -2,   -2,   -2,  391,  515,   -2,   -2,   -2,   -2,
 /*   130 */    -2,  509,  -80,  614,  979, 1484,  -81,  -81,  -81, 1367,
 /*   140 */    75,  182,  182,  314,  311,  364,  219,   86,  613,  609,
 /*   150 */    -2,   -2,   -2,   -2,   -2,   -2,   -2,   -2,   -2,   -2,
 /*   160 */    -2,   -2,   -2,   -2,   -2,   -2,   -2,   -2,   -2,   -2,
 /*   170 */    -2,   -2,   -2,   -2,   -2,   -2,   -2,   -2,   -2,   -2,
 /*   180 */    -2,   -2,  578,  578,  578,  615, 1229, 1229, 1229,  -81,
 /*   190 */   -81,  -81,  160,  168,  168,  283,  500,  500,  500,  278,
 /*   200 */   449,  330,  432,  409,  352,   48,   48,   48,   48,  426,
 /*   210 */   286,   48,   48,  728,  581,  369,  590,  495,  224,  224,
 /*   220 */   727,  495,  727,  719,  614,  659,  614,  659,  811,  659,
 /*   230 */   224,  257,  480,  480,  614,  144,  375,  -18, 1501, 1297,
 /*   240 */  1297, 1492, 1492, 1297, 1494, 1445, 1239, 1503, 1503, 1503,
 /*   250 */  1503, 1297, 1474, 1239, 1494, 1445, 1445, 1297, 1474, 1373,
 /*   260 */  1457, 1297, 1297, 1474, 1297, 1474, 1297, 1474, 1463, 1369,
 /*   270 */  1369, 1369, 1430, 1394, 1394, 1463, 1369, 1379, 1369, 1430,
 /*   280 */  1369, 1369, 1341, 1342, 1341, 1342, 1341, 1342, 1297, 1297,
 /*   290 */  1278, 1281, 1262, 1244, 1265, 1239, 1229, 1319, 1325, 1325,
 /*   300 */  1270, 1270, 1270, 1270,  -81,  -81,  -81,  -81,  -81,  -81,
 /*   310 */  1013,  242,  757,  752,  465,  363,  947,  232,  944,  906,
 /*   320 */   872,  837,  738,  448,  381,  230,   84,  362,  300, 1264,
 /*   330 */  1263, 1234, 1108, 1228, 1180, 1223, 1217, 1207, 1099, 1174,
 /*   340 */  1109, 1115, 1103, 1199, 1105, 1202, 1216, 1087, 1193, 1178,
 /*   350 */  1174, 1176, 1068, 1079, 1078, 1086, 1166, 1137, 1034, 1152,
 /*   360 */  1146, 1127, 1044, 1006, 1093, 1120, 1090, 1083, 1085, 1022,
 /*   370 */  1101, 1104, 1102,  972, 1015, 1098, 1027, 1056, 1050, 1045,
 /*   380 */  1031,  998, 1018,  981,  946,  950,  973,  963,  862,  885,
 /*   390 */   819,  884,  782,  796,  806,  807,  790,  796,  793,  758,
 /*   400 */   753,  732,  692,  696,  682,  686,  667,  544,  291,  521,
 /*   410 */   510,  365,  358,  139,  114,   54,   14,   25,
};
#define YY_REDUCE_USE_DFLT (-169)
#define YY_REDUCE_COUNT (309)
#define YY_REDUCE_MIN   (-168)
#define YY_REDUCE_MAX   (1411)
static const short yy_reduce_ofst[] = {
 /*     0 */   318,   90, 1095,  221,  157,   21,  159,   18,  150,  390,
 /*    10 */   385,  378,  380,  315,  325,  249,  529,  -71,    8, 1282,
 /*    20 */  1261, 1225, 1185, 1183, 1181, 1177, 1151, 1128, 1096, 1063,
 /*    30 */  1059,  985,  982,  964,  962,  948,  908,  890,  874,  834,
 /*    40 */   832,  816,  813,  800,  759,  746,  742,  739,  726,  684,
 /*    50 */   681,  668,  665,  652,  612,  593,  591,  537,  524,  518,
 /*    60 */   504,  455,  511,  376,  517,  247, -168,   24,  420,  463,
 /*    70 */   463,  463,  463,  463,  463,  463,  463,  463,  463,  463,
 /*    80 */   463,  463,  463,  463,  463,  463,  463,  463,  463,  463,
 /*    90 */   463,  463,  463,  463,  463,  463,  463,  463,  463,  463,
 /*   100 */   463,  463,  463,  463,  463,  -74,  463,  463, 1112,  835,
 /*   110 */  1107, 1039, 1036,  965,  887,  845,  818,  760,  688,  687,
 /*   120 */   538,  743,  623,  592,  446,  513,  814,  740,  670,  156,
 /*   130 */   468,  553,  184,  616,  463,  463,  463,  463,  463,  595,
 /*   140 */   821,  786,  745,  909, 1305, 1302, 1301, 1299,  675,  675,
 /*   150 */  1295, 1273, 1259, 1245, 1242, 1233, 1222, 1221, 1214, 1213,
 /*   160 */  1212, 1204, 1184, 1158, 1123, 1119, 1114, 1100, 1070, 1047,
 /*   170 */  1046, 1040, 1038,  969,  968,  966,  909,  904,  896,  895,
 /*   180 */   892,  599,  839,  838,  766,  754,  881,  734,  346,  605,
 /*   190 */   622,  -94, 1393, 1401, 1396, 1392, 1391, 1390, 1384, 1361,
 /*   200 */  1365, 1381, 1365, 1365, 1365, 1365, 1365, 1365, 1365, 1332,
 /*   210 */  1338, 1365, 1365, 1361, 1399, 1368, 1411, 1359, 1353, 1352,
 /*   220 */  1329, 1358, 1324, 1366, 1389, 1377, 1386, 1376, 1364, 1371,
 /*   230 */  1336, 1323, 1321, 1320, 1375, 1344, 1351, 1387, 1300, 1380,
 /*   240 */  1378, 1298, 1290, 1374, 1316, 1347, 1328, 1337, 1334, 1333,
 /*   250 */  1327, 1363, 1362, 1318, 1296, 1326, 1322, 1355, 1354, 1269,
 /*   260 */  1274, 1350, 1349, 1348, 1346, 1345, 1343, 1335, 1315, 1314,
 /*   270 */  1313, 1312, 1309, 1271, 1267, 1308, 1307, 1306, 1304, 1291,
 /*   280 */  1303, 1292, 1260, 1266, 1258, 1253, 1247, 1227, 1268, 1257,
 /*   290 */  1187, 1198, 1200, 1190, 1170, 1168, 1167, 1182, 1189, 1164,
 /*   300 */  1179, 1162, 1138, 1136, 1061, 1043, 1021, 1111, 1110, 1116,

};
static const YYACTIONTYPE yy_default[] = {
 /*     0 */   634,  868,  956,  956,  868,  868,  956,  956,  956,  758,
 /*    10 */   956,  956,  956,  866,  956,  956,  786,  786,  930,  956,
 /*    20 */   956,  956,  956,  956,  956,  956,  956,  956,  956,  956,
 /*    30 */   956,  956,  956,  956,  956,  956,  956,  956,  956,  956,
 /*    40 */   956,  956,  956,  956,  956,  956,  956,  956,  956,  956,
 /*    50 */   956,  956,  956,  956,  956,  956,  956,  956,  956,  956,
 /*    60 */   956,  956,  956,  956,  956,  956,  956,  673,  762,  792,
 /*    70 */   956,  956,  956,  956,  956,  956,  956,  956,  929,  931,
 /*    80 */   800,  799,  909,  773,  797,  790,  794,  869,  862,  863,
 /*    90 */   861,  865,  870,  956,  793,  829,  846,  828,  840,  845,
 /*   100 */   852,  844,  841,  831,  830,  665,  832,  833,  956,  956,
 /*   110 */   956,  956,  956,  956,  956,  956,  956,  956,  956,  956,
 /*   120 */   956,  956,  956,  956,  660,  727,  956,  956,  956,  956,
 /*   130 */   956,  956,  956,  956,  834,  835,  849,  848,  847,  956,
 /*   140 */   956,  956,  956,  956,  956,  956,  956,  956,  956,  956,
 /*   150 */   956,  936,  934,  956,  881,  956,  956,  956,  956,  956,
 /*   160 */   956,  956,  956,  956,  956,  956,  956,  956,  956,  956,
 /*   170 */   956,  956,  956,  956,  956,  956,  956,  956,  956,  956,
 /*   180 */   956,  640,  758,  758,  758,  634,  956,  956,  956,  948,
 /*   190 */   762,  752,  718,  956,  956,  956,  956,  956,  956,  956,
 /*   200 */   956,  956,  956,  956,  956,  802,  741,  919,  921,  956,
 /*   210 */   902,  739,  662,  760,  675,  750,  642,  796,  775,  775,
 /*   220 */   914,  796,  914,  699,  956,  786,  956,  786,  696,  786,
 /*   230 */   775,  864,  956,  956,  956,  759,  750,  956,  941,  766,
 /*   240 */   766,  933,  933,  766,  808,  731,  796,  738,  738,  738,
 /*   250 */   738,  766,  657,  796,  808,  731,  731,  766,  657,  908,
 /*   260 */   906,  766,  766,  657,  766,  657,  766,  657,  874,  729,
 /*   270 */   729,  729,  714,  878,  878,  874,  729,  699,  729,  714,
 /*   280 */   729,  729,  779,  774,  779,  774,  779,  774,  766,  766,
 /*   290 */   956,  791,  780,  789,  787,  796,  956,  717,  650,  650,
 /*   300 */   639,  639,  639,  639,  953,  953,  948,  701,  701,  683,
 /*   310 */   956,  956,  956,  956,  956,  956,  956,  883,  956,  956,
 /*   320 */   956,  956,  956,  956,  956,  956,  956,  956,  956,  956,
 /*   330 */   635,  943,  956,  956,  940,  956,  956,  956,  956,  801,
 /*   340 */   956,  956,  956,  956,  956,  956,  956,  956,  956,  956,
 /*   350 */   918,  956,  956,  956,  956,  956,  956,  956,  912,  956,
 /*   360 */   956,  956,  956,  956,  956,  905,  904,  956,  956,  956,
 /*   370 */   956,  956,  956,  956,  956,  956,  956,  956,  956,  956,
 /*   380 */   956,  956,  956,  956,  956,  956,  956,  956,  956,  956,
 /*   390 */   956,  956,  956,  788,  956,  781,  956,  867,  956,  956,
 /*   400 */   956,  956,  956,  956,  956,  956,  956,  956,  744,  817,
 /*   410 */   956,  816,  820,  815,  667,  956,  648,  956,  631,  636,
 /*   420 */   952,  955,  954,  951,  950,  949,  944,  942,  939,  938,
 /*   430 */   937,  935,  932,  928,  887,  885,  892,  891,  890,  889,
 /*   440 */   888,  886,  884,  882,  803,  798,  795,  927,  880,  740,
 /*   450 */   737,  736,  656,  945,  911,  920,  807,  806,  809,  917,
 /*   460 */   916,  915,  913,  910,  897,  805,  804,  732,  872,  871,
 /*   470 */   659,  901,  900,  899,  903,  907,  898,  768,  658,  655,
 /*   480 */   664,  721,  720,  728,  726,  725,  724,  723,  722,  719,
 /*   490 */   666,  674,  685,  713,  698,  697,  877,  879,  876,  875,
 /*   500 */   706,  705,  711,  710,  709,  708,  707,  704,  703,  702,
 /*   510 */   695,  694,  700,  693,  716,  715,  712,  692,  735,  734,
 /*   520 */   733,  730,  691,  690,  689,  820,  688,  687,  826,  825,
 /*   530 */   813,  856,  755,  754,  753,  765,  764,  777,  776,  811,
 /*   540 */   810,  778,  763,  757,  756,  772,  771,  770,  769,  761,
 /*   550 */   751,  783,  785,  784,  782,  858,  767,  855,  926,  925,
 /*   560 */   924,  923,  922,  860,  859,  827,  824,  678,  679,  895,
 /*   570 */   894,  896,  893,  681,  680,  677,  676,  857,  746,  745,
 /*   580 */   853,  850,  842,  838,  854,  851,  843,  839,  837,  836,
 /*   590 */   822,  821,  819,  818,  814,  823,  669,  747,  743,  742,
 /*   600 */   812,  749,  748,  686,  684,  682,  663,  661,  654,  652,
 /*   610 */   651,  653,  649,  647,  646,  645,  644,  643,  672,  671,
 /*   620 */   670,  668,  667,  641,  638,  637,  633,  632,  630,
};

/* The next table maps tokens into fallback tokens.  If a construct
** like the following:
** 
**      %fallback ID X Y Z.
**